Error in data at lbn как исправить

8GB USB drive shows 8MB size, can’t format

• The USB is 8GB, it doesn’t have any physical lock.
• It is a goku doll and it was a gift for my friend, there isn’t any brand. Chip Genius says that it is generic.
• It is saying that it has 8MB and I can’t restore it to their previous size or at least something that is not 8MB.
• I can tell that this USB was able to store at least 4GB, as we used it to store a ISO without problems.
• Even if it may be fake it wouldn’t have 8MB, and we don’t care if it is only 4GB or 6GB. We just want to make it usable again.
• Data recovery is not a problem here, we have backup of everything inside.
• I can’t enter to the data inside the USB even if I make a partition via diskpart as Windows ask me to format it, and if I try to format it, Windows says that it can’t finish the format.
• I think that the USB is corrupted as I plugged it out when the Wii was stuck reading it without response. I’m not sure if it is truly bricked or it is still salvable.

I have a 8GB USB pendrive stuck to 8MB, the USB thinks that it is 8MB and I can’t do very much.

We were using it to charge iso files of Wii games to play in a fam’s Wii. The Wii’s homebrew app USB Loader GX wasn’t reading the game (and actually there were two inside), but it was able to read before using it today. So I tried in the computer to check what was wrong, I changed the USB Loader in the Wii with another USB Loader And that USB Loader bricked the USB, when it tried to read the game, the wii just got stuck forever, I reset the wii and when I tried to check again what was wrong, but the USB was dead and I couldn’t format it that version of USB Loader messed up the USB when I resetted or the USB was almost dying from before.

I tried almost everything to save the USB, first, this USB doesn’t have any type of physical lock, it is just the head of a Goku’s doll. I first supposed that the partition table was messed up (It somehow happened with a pendrive that I tried to use to format my PC and it just died by itself, something about partitions) Now a friend told me that it may be the firmware so, here is all what I tried to do

++ Windows 10 Solutions

Diskpart // It was able to clean the disk. Size: 8 MB Free: 8128 KB

Using Format // In capacity it shows Unknown Capacity File system: FAT (Default) Allocation unit size: Default Quick format ON.

I get the error Windows was unable to complete the format

Error checking tool // I just can’t use it because it asks to format the USB and I can’t.

CHKDSK /f /r // It shows this error

Fake Flash Test v1.1.2 // I couldn’t even test it.

Chip Genius info // It shows me that it is a 32GB but is actually 8GB, not 32. Also that chip vendor and controller I couldn’t find it online (Chinesse webpages showed up)

Flash Drive/Card Tester //

Read & Write does the same thing:

Read Write and Compare starts to show errors, This is a fragment of the test as it is pretty long:

BOOTICE // This couldn’t even do anything, I can’t use any option of Process PBR, Process MBR is disabled. I tried to format the «8MB» drive with it using FAT32 and without optimized internal structure. It was successful but Windows doesn’t detect it and ask me to format it. Also process MBR is now available but it doesn’t do anything.

H2testw // Can’t use it, it asks me to format the drive. (Error accesing target)

HP USB Disk Storage Format Tool V2.2.3 // It says Failed to format the device

RMPrepUSB V2.1.744 // For some reason it says UNMOUNTED, I tried all the tests and it always says

and it crashes afterwards.

Check Flash V1.16.1 // It says: when I choose the USB. Any write and read test with default options with Use Temporary File:

As Logical Drive

As Physical Drive

TestDisk v7.2 // I choose the problematic USB and «none», after that I choosed FAT32, after that nothing happened so I switched to NTFS, I pressed dump and it shows me an interesting message of missing operating system. Next I went back and picked «Analyse» and it shows me different partitions of what I think that it was what I did these last hours. (I tried it before but it didn’t show anything to me) Check the gallery please. https://imgur.com/a/PgFgO1J

Linux Things // On linux I instaled in another USB Slax so I can use the terminal and try to fix it through Linux.

I used the command dd of=/dev/zero if=/dev/sdc bs=1M but nothing happened

I tried to use Gparted but it didn’t work, it couldn’t even make a partition table nor format it to make these 8MB accessible.

I tried to use fdisk and delete partitions but when I first tried it, there wasn’t one

I tried Linux version of Test Disk but nothing happened too, also, when I first tried there wasn’t any partition too.

I did almost everything that I could think and get in for, I just can’t format it, I can’t fix it, I can’t update the firmware nor search it, I can’t even wipe the info inside to start anew, I can’t make it detect that it has truly 8GB and not that misery of 8MB and nothing. The most miraculous thing was when I tried to change the cylinders or heads on Testdisk and it changed from 8MB to 128

something, but I was in linux and I couldn’t check if I can enter the USB as I’m not a Linux users. Also I think that I would mess it a lot more than it is, so I didn’t touch it. Can someone help me with this or has an idea of what can I do? Thanks. I may be still trying something so some of the results from Test Disk will be different if I show them again.

• Also I can truly tell that it may not be a fake drive, it truly is a 8GB drive and I was using it a couple of weeks ago for storing 7GB at least.

Источник

Error In Data At Lbn

We have collected for you the most relevant information on Error In Data At Lbn, as well as possible solutions to this problem. Take a look at the links provided and find the solution that works. Other people have encountered Error In Data At Lbn before you, so use the ready-made solutions.

Solved- 4 Most Common SD Card Errors! — MiniTool

https://www.minitool.com/data-recovery/sd-card-errors.html

Jun 19, 2020 · SD Card is a non-volatile memory card format, and it is commonly used in portable electronic devices (such as digital cameras, mobile phones, MP3 players, and so on) to store digital information. However, more and more users reported that they had encountered various SD card errors, but didn’t know how to solve, as shown below.. SD card unexpectedly removed.

Burning process failure: error reading data — Nero & InCD .

https://club.myce.com/t/burning-process-failure-error-reading-data/201851

Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: TDK… Media type ID: 003 Product revision number: 0

Translate error in data at lbn in German with examples

https://mymemory.translated.net/en/English/German/error-in-data-at-lbn

Contextual translation of «error in data at lbn» into German. Human translations with examples: in daten, in daten, peilfehler, motivirrtum, data exchange, error in time.

Translate error in data at lbn in French with examples

https://mymemory.translated.net/en/English/French/error-in-data-at-lbn

Contextual translation of «error in data at lbn» into French. Human translations with examples: lapsus, erreur dans sql, faute de calcul, erreur de calcul.

SAP Help Portal

https://help.sap.com/viewer/038be0a869c740f9af8d22c84180cfd7/LBN/en-US

We use cookies and similar technologies to give you a better experience, improve performance, analyze traffic, and to personalize content. By continuing to browse this website you agree to the use of cookies.

SAP Help Portal

https://help.sap.com/viewer/ef5c5fd2b89a4e6a8d611a71feadf0bb/LBN/en-US

LBN 2.0 – 2020-09-19: Connectivity: SFTP communication supported: In the Systems Connections app, data contributors and partners can now create communnication details for SFTP. New: Data Contributor: LBN 2.0 – 2020-09-19

Error in : unknown branch from .

https://root.cern.ch/root/roottalk/roottalk10/0896.html

Jul 30, 2010 · From: Harinder Singh Bawa Date: Fri, 30 Jul 2010 05:55:25 -0700. Dear Root Experts, I need to understand 2 things. First I opened a rootfile and made .C and .h using MakeClass . I am expecting that MakeClass incorporated all the branch addresses and variables.

How to Fix an Unformattable and Unusable USB Drive — Make .

https://www.maketecheasier.com/fix-unformattable-usb-drive/

If you no longer need the data in the removable media, the command-line tool is a better way to help you get to the root of the problem and fix the storage space issues once and for all. On Windows 10, go to the search button and run the command prompt as an administrator. Make sure the USB drive has been inserted already.

Kingston Datatraveler 8gb shows as 2gb AnandTech Forums .

https://forums.anandtech.com/threads/kingston-datatraveler-8gb-shows-as-2gb.255594/

Jan 29, 2009 · I just used my kingston 8gb flash drive as a dell diagnostic boot drive thingy, and now in windows it only shows at a 1.96gb drive. I reformatted, tried with NTFS, FAT, FAT32, and it shows as 2gb under them all. Is there anything I can do to restore it to the 8gb I know it’s good for?

Error In Data At Lbn Fixes & Solutions

We are confident that the above descriptions of Error In Data At Lbn and how to fix it will be useful to you. If you have another solution to Error In Data At Lbn or some notes on the existing ways to solve it, then please drop us an email.

Источник

Ошибка ERROR: archive data corrupted (decompression fails)

При распаковке какого-либо архива (репака) пользователь может столкнуться с ошибкой распаковки и соответствующим сообщением «ERROR: archive data corrupted (decompression fails). Данная проблема может быть вызвана множеством причин, от структурных повреждений самого архива до аппаратных проблем в работе памяти компьютера. В этой статье я расскажу, какова суть данной ошибки, познакомлю читателя с её причинами, а также поясню, как исправить её на вашем ПК.

Суть и причины ошибки ISDone.dll

Как следует из текста ошибки, который в переводе звучит как «архивные данные повреждены, декомпрессия закончилась неудачей», возникновение данной ошибки связано с неудачей в декомпрессии (распаковке) какого-либо архива. Обычно это обусловлено следующим рядом причин:

• Изначально «битый» архив (ошибки при запаковке файла, приведшие к созданию нерабочего архива);
• Не корректная загрузка архива с внешнего источника, в процессе которой тело архива было или повреждено, или загружено не полностью;
• Не достаточно качественный архиватор, плохо распаковывающий архивы данного типа;
• Путь, по которому размещён архив на ПК, имеет кириллические символы;
• Распаковка архива в директорию с предлинным названием;
• Злокачественное действие вирусных программ;
• Действие антивирусных программ, блокирующих корректную распаковку нужного архива (в частности, функционал антишпионской программы от Microsoft под названием «Защитник Windows» (Windows Defender), или системного фильтра «SmartScreen» могут стать причинами описываемой мной ошибки);
• Проблемы с правами доступа диска, куда распаковывается нужный нам архив;
• Отсутствие свободного места на диске, куда распаковывается архив;
• Проблемы в работе планок памяти ПК;
• Поломка (нестабильная работа) носителя, на котором находится архив (например, поломка флеш-накопителя).

Как исправить ERROR: archive data corrupted (decompression fails)

Для решения проблемы archive data corrupted (decompression fails) рекомендую выполнить следующее:

1. Проверьте наличие достаточного количества свободного места на жёстком диске, при необходимости освободите место, удалив ряд ненужных файлов;
2. Временно отключите ваш антивирус и брандмауэр, а затем попробуйте выполнить распаковку нужного архива;

Временно отключите ваш брандмауэр

Отключите системный фильтр Smart Screen на ОС Виндовс 8 и 10, а также «Защитник Windows»;

Если путь к архиву имеет кириллические символы, перенесите данный архив в папку, путь к которой имеет только латинские символы, и попробуйте оттуда распаковать данный архив;

Запускайте репак от имени администратора (наводим курсор на выполняемый файл репака, кликаем правой клавишей мышки, выбираем «запуск от имени администратора»;

Попробуйте использовать другой архиватор для распаковки архива (при возможности), или переустановите ваш архиватор, использовав самую свежую его версию;

Попробуйте перенести проблемный архив на другой ПК и распаковать его там. Если всё пройдёт без проблем, значит причина в вашем ПК, если же проблемы возникнут и там, значит сам архив повреждён;

Попробуйте скачать данный архив с другого источника (или от другого автора репака). Довольно часто при распаковке определённого архива от конкретного автора появляется проблема archive data corrupted (decompression fails), репак же другого автора может устанавливаться без каких-либо проблем;

Проверьте вашу систему на вируса. Помогут такие инструменты как Dr.Web CureIt!, Trojan Remover, Malwarebytes Anti-Malware и ряд других аналогов;

В ряде случаев проблемы архива наблюдаются из-за носителя (например, флешки), на котором переносится архив. Попробуйте использовать альтернативный носитель;

Проверьте память вашего компьютера специальными тестами (уровня Memtest). Можно также попробовать поочерёдное изъятие планок памяти, и запуск процесса декомпрессии, что позволит идентифицировать нестабильно работающую планку памяти.

Попробуйте поочерёдное изъятие планок памят

Заключение

Причиной ошибки ERROR: archive data corrupted (decompression fails) обычно является повреждение самого файла-архива. Для решения указанной проблемы рекомендую воспользоваться перечисленными мной советами, это поможет избавиться от ошибки archive data corrupted (decompression fails) на вашем ПК.

Источник

0 Пользователей и 1 Гость просматривают эту тему.

Мастер

(1581),
закрыт

5 лет назад

TL;DR:

• The USB is 8GB, it doesn’t have any physical lock.
• It is a goku doll and it was a gift for my friend, there isn’t any brand. Chip Genius says that it is generic.
• It is saying that it has 8MB and I can’t restore it to their previous size or at least something that is not 8MB.
• I can tell that this USB was able to store at least 4GB, as we used it to store a ISO without problems.
• Even if it may be fake it wouldn’t have 8MB, and we don’t care if it is only 4GB or 6GB. We just want to make it usable again.
• Data recovery is not a problem here, we have backup of everything inside.
• I can’t enter to the data inside the USB even if I make a partition via diskpart as Windows ask me to format it, and if I try to format it, Windows says that it can’t finish the format.
• I think that the USB is corrupted as I plugged it out when the Wii was stuck reading it without response. I’m not sure if it is truly bricked or it is still salvable.

---

I have a 8GB USB pendrive stuck to 8MB, the USB thinks that it is 8MB and I can’t do very much.

What happened:

We were using it to charge iso files of Wii games to play in a fam’s
Wii. The Wii’s homebrew app USB Loader GX wasn’t reading the game
(and actually there were two inside), but it was able to read before
using it today. So I tried in the computer to check what was wrong, I
changed the USB Loader in the Wii with another USB Loader And that USB
Loader bricked the USB, when it tried to read the game, the wii just
got stuck forever, I reset the wii and when I tried to check again
what was wrong, but the USB was dead and I couldn’t format it that version of USB Loader messed up the USB when I resetted or the USB was almost dying from before.

I tried almost everything to save the USB, first, this USB doesn’t have any type of physical lock, it is just the head of a Goku’s doll.
I first supposed that the partition table was messed up (It somehow happened with a pendrive that I tried to use to format my PC and it just died by itself, something about partitions)
Now a friend told me that it may be the firmware so, here is all what I tried to do

++ Windows 10 Solutions

Diskpart //
It was able to clean the disk.
Size: 8 MB
Free: 8128 KB

Using Format //
In capacity it shows Unknown Capacity
File system: FAT (Default)
Allocation unit size: Default
Quick format ON.

I get the error Windows was unable to complete the format

Error checking tool //
I just can’t use it because it asks to format the USB and I can’t.

CHKDSK /f /r //
It shows this error

The type of the file system is RAW.
CHKDSK is not available for RAW drives.

Fake Flash Test v1.1.2 //
I couldn’t even test it.

FAKEFLASHTEST v1.1.2  [SSi]
DRIVE 2 -    7.0MiB Generic Flash Disk 2.0         
FFT - Quick Size Test (destructive)
F:                       DRIVE 2 -    7.0MiB Generic Flash Disk 2.0         

Writing marker blocks to drive 2
100% complete  - 0 min 1 sec remaining
Reading back marker blocks...
159% complete - 0 min 1 sec remaining
Memory tested in blocks of 25600 sectors.

BAD MEMORY from sector 16064 (7.0MiB) to sector 16064 (7.0Mib)
Test took 0 seconds.

                         *** FAILED ***

DEVICE HAS DUPLICATE OR BAD BLOCKS!

Recommended maximum usable partition size: -4.0Mib (approx. Last good Sector=16064)

Unplug and re-connect the drive, then reformat it using Windows or RMPrepUSB.

Chip Genius info //
It shows me that it is a 32GB but is actually 8GB, not 32. Also that chip vendor and controller I couldn’t find it online (Chinesse webpages showed up)

Description: [F:]USB Mass Storage Device(Generic Flash Disk 2.0)
Device Type:  Mass Storage Device

Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA

USB Device ID: VID = 214B PID = 2060

Device Vendor: Generic
Device Name: USB2.0 FlashDisk
Device Revision: 1001

Manufacturer: Generic
Product Model: Flash Disk 2.0
Product Revision: 6.80

Controller Vendor: HuaYi
Controller Part-Number: HY6919
Flash ID code:      453C98B3 - SanDisk - 1CE/Single Channel [TLC] -> Total Capacity = 32GB

Hint: : Please exit this program and RE-PLUG your USB Flash Drive before you can operate it!

Tools on web: http://dl.mydigit.net/search/?type=all&q=HY6919


Possible Flash Part-Number
----------------------------
Unknown


Flash ID mapping table
----------------------------
[Channel 0] [Channel 1]
453C98B37672    --------
--------    --------
--------    --------
--------    --------

Flash Drive/Card Tester //

Read & Write does the same thing:

00:53:25.25 - -------------------------------- New test process started --------------------------------
00:53:25.26 - Started "Reading test data" for drive F: 7MB, "Generic, Flash Disk 2.0, 6.80, ", 512b
00:53:25.53 - Completed "Reading test data" for drive F: 7MB, "Generic, Flash Disk 2.0, 6.80, ", 512b
00:53:25.53 - Tested total 7.999MB in 0:00:00 with 31.768MB/s
00:53:25.53 - Total read errors: Fatal=0, Recoverable=0

Read Write and Compare starts to show errors, This is a fragment of the test as it is pretty long:

00:57:15.25 - ! Error in data at LBN = 240 (Off: 0h): expected 000401C0h, encountered 01FF01C0h.
00:57:15.25 - ! Error in data at LBN = 241 (Off: 0h): expected 000401C4h, encountered 01FF01C4h.
00:57:15.25 - ! Error in data at LBN = 242 (Off: 0h): expected 000401C8h, encountered 01FF01C8h.
00:57:15.25 - ! Error in data at LBN = 243 (Off: 0h): expected 000401CCh, encountered 01FF01CCh.
00:57:15.26 - ! Error in data at LBN = 244 (Off: 0h): expected 000401D0h, encountered 01FF01D0h.
00:57:15.26 - ! Error in data at LBN = 245 (Off: 0h): expected 000401D4h, encountered 01FF01D4h.
00:57:15.26 - ! Error in data at LBN = 246 (Off: 0h): expected 000401D8h, encountered 01FF01D8h.
00:57:15.26 - ! Error in data at LBN = 247 (Off: 0h): expected 000401DCh, encountered 01FF01DCh.
00:57:15.28 - ! Error in data at LBN = 248 (Off: 0h): expected 000401E0h, encountered 01FF01E0h.
00:57:15.28 - ! Error in data at LBN = 249 (Off: 0h): expected 000401E4h, encountered 01FF01E4h.

BOOTICE // This couldn’t even do anything, I can’t use any option of Process PBR, Process MBR is disabled. I tried to format the “8MB” drive with it using FAT32 and without optimized internal structure. It was successful but Windows doesn’t detect it and ask me to format it… Also process MBR is now available but it doesn’t do anything.

H2testw // Can’t use it, it asks me to format the drive. (Error accesing target)

HP USB Disk Storage Format Tool V2.2.3 // It says Failed to format the device

RMPrepUSB V2.1.744 // For some reason it says UNMOUNTED, I tried all the tests and it always says

Cannot find drive 2
Please ensure you have specified DRIVE=n where n is a NUMBER not a letter!

and it crashes afterwards.

Check Flash V1.16.1 // It says: when I choose the USB.
Any write and read test with default options with Use Temporary File:

File or device error: The volume does not contain a recognized file system.
Please make sure that all required file system drivers are loaded and that the volume is not corrupted

As Logical Drive

Test fail: Invalid handle.

As Physical Drive

File or device error: Access is denied

TestDisk v7.2 // I choose the problematic USB and “none”, after that I choosed FAT32, after that nothing happened so I switched to NTFS, I pressed dump and it shows me an interesting message of missing operating system. Next I went back and picked “Analyse” and it shows me different partitions of what I think that it was what I did these last hours. (I tried it before but it didn’t show anything to me) Check the gallery please.
https://imgur.com/a/PgFgO1J

Linux Things // On linux I instaled in another USB Slax so I can use the terminal and try to fix it through Linux.

• I used the command dd of=/dev/zero if=/dev/sdc bs=1M but nothing happened

• I tried to use Gparted but it didn’t work, it couldn’t even make a partition table nor format it to make these 8MB accessible.

• I tried to use fdisk and delete partitions but when I first tried it, there wasn’t one

• I tried Linux version of Test Disk but nothing happened too, also, when I first tried there wasn’t any partition too.

I did almost everything that I could think and get in for, I just can’t format it, I can’t fix it, I can’t update the firmware nor search it, I can’t even wipe the info inside to start anew, I can’t make it detect that it has truly 8GB and not that misery of 8MB and nothing. The most miraculous thing was when I tried to change the cylinders or heads on Testdisk and it changed from 8MB to 128~something, but I was in linux and I couldn’t check if I can enter the USB as I’m not a Linux users. Also I think that I would mess it a lot more than it is, so I didn’t touch it.
Can someone help me with this or has an idea of what can I do? Thanks. I may be still trying something so some of the results from Test Disk will be different if I show them again.

• Also I can truly tell that it may not be a fake drive, it truly is a 8GB drive and I was using it a couple of weeks ago for storing 7GB at least.

I just ran a test on the flash drive and ended up with a few comparrison errors which I really have no clue about. How bad are these kinds of errors?

++++++++++++ Start of logging 5-Mar-08 at 14:19:28 ++++++++++++

5-Mar-08 14:19:28 i 00:02:14.21 – ——————————– New test process started ——————————–

5-Mar-08 14:19:28 i 00:02:14.23 – Started “Writing test data” for drive J: 7903MB, “Corsair, UFD, 1100, ^J€^B^B”, 512b

5-Mar-08 14:27:03 i 00:09:49.96 – Completed “Writing test data” for drive J: 7903MB, “Corsair, UFD, 1100, ^J€^B^B”, 512b

5-Mar-08 14:27:03 i 00:09:49.96 – Tested total 7903.999MB in 0:07:35 with 17.351MB/s

5-Mar-08 14:27:03 i 00:09:49.96 – Total write errors: Fatal=0, Recoverable=0

5-Mar-08 14:27:03 i 00:09:49.96 – Started “Reading and comparing data” for drive J: 7903MB, “Corsair, UFD, 1100, ^J€^B^B”, 512b

5-Mar-08 14:29:54 i 00:12:41.03 – ! Error in data at LBN = 6206440 (Off: 0h): expected B3E80000h, encountered 44524352h.

5-Mar-08 14:29:54 i 00:12:41.03 – ! Error in data at LBN = 6206441 (Off: 0h): expected B3E80004h, encountered 00090028h.

5-Mar-08 14:29:54 i 00:12:41.03 – ! Error in data at LBN = 6206442 (Off: 0h): expected B3E80008h, encountered 00099000h.

5-Mar-08 14:29:54 i 00:12:41.03 – ! Error in data at LBN = 6206443 (Off: 0h): expected B3E8000Ch, encountered 00000000h.

5-Mar-08 14:29:54 i 00:12:41.03 – ! Error in data at LBN = 6206444 (Off: 0h): expected B3E80010h, encountered 00000001h.

5-Mar-08 14:29:54 i 00:12:41.03 – ! Error in data at LBN = 6206445 (Off: 0h): expected B3E80014h, encountered 00010001h.

5-Mar-08 14:29:54 i 00:12:41.03 – ! Error in data at LBN = 6206446 (Off: 0h): expected B3E80018h, encountered 000009F8h.

5-Mar-08 14:29:54 i 00:12:41.03 – ! Error in data at LBN = 6206447 (Off: 0h): expected B3E8001Ch, encountered 00000000h.

5-Mar-08 14:29:54 i 00:12:41.03 – ! Error in data at LBN = 6206448 (Off: 0h): expected B3E80020h, encountered 0681332Ch.

5-Mar-08 14:29:54 i 00:12:41.03 – ! Error in data at LBN = 6206449 (Off: 0h): expected B3E80024h, encountered 00000000h.

5-Mar-08 14:29:54 i 00:12:41.03 – ! Error in data at LBN = 6206450 (Off: 0h): expected B3E80028h, encountered 00000001h.

5-Mar-08 14:29:54 i 00:12:41.04 – ! Error in data at LBN = 6206451 (Off: 0h): expected B3E8002Ch, encountered 00000030h.

5-Mar-08 14:29:54 i 00:12:41.04 – ! Error in data at LBN = 6206452 (Off: 0h): expected B3E80030h, encountered 00000681h.

5-Mar-08 14:29:54 i 00:12:41.04 – ! Error in data at LBN = 6206453 (Off: 0h): expected B3E80034h, encountered 00000000h.

5-Mar-08 14:29:54 i 00:12:41.04 – ! Error in data at LBN = 6206454 (Off: 0h): expected B3E80038h, encountered 00000000h.

5-Mar-08 14:29:54 i 00:12:41.04 – ! Error in data at LBN = 6206455 (Off: 0h): expected B3E8003Ch, encountered 00000000h.

5-Mar-08 14:29:54 i 00:12:41.04 – ! Error in data at LBN = 6206456 (Off: 0h): expected B3E80040h, encountered 06813208h.

5-Mar-08 14:29:54 i 00:12:41.04 – ! Error in data at LBN = 6206457 (Off: 0h): expected B3E80044h, encountered 00000000h.

5-Mar-08 14:29:54 i 00:12:41.04 – ! Error in data at LBN = 6206458 (Off: 0h): expected B3E80048h, encountered 068131E4h.

5-Mar-08 14:29:54 i 00:12:41.04 – ! Error in data at LBN = 6206459 (Off: 0h): expected B3E8004Ch, encountered 00000000h.

5-Mar-08 14:29:54 i 00:12:41.04 – ! Error in data at LBN = 6206460 (Off: 0h): expected B3E80050h, encountered 00000000h.

5-Mar-08 14:29:54 i 00:12:41.04 – ! Error in data at LBN = 6206461 (Off: 0h): expected B3E80054h, encountered 00000000h.

5-Mar-08 14:29:54 i 00:12:41.04 – ! Error in data at LBN = 6206462 (Off: 0h): expected B3E80058h, encountered 00000028h.

5-Mar-08 14:29:54 i 00:12:41.04 – ! Error in data at LBN = 6206463 (Off: 0h): expected B3E8005Ch, encountered 00000000h.

5-Mar-08 14:34:28 i 00:17:14.32 – Completed “Reading and comparing data” for drive J: 7903MB, “Corsair, UFD, 1100, ^J€^B^B”, 512b

5-Mar-08 14:34:28 i 00:17:14.32 – Tested total 7903.999MB in 0:07:24 with 17.806MB/s

5-Mar-08 14:34:28 i 00:17:14.32 – Total errors: Read fatal=0, Read recoverable=0; Write fatal=0, Write recoverable=0; Comparsion=24

———— Stop of logging 5-Mar-08 at 14:34:28 ————