Java ошибка 112 как исправить

java error code 112

Ошибки загрузки: MSI поврежден, файл java_sp.dll поврежден, 1305, 2755, 1606, 25025, 1618

Этот раздел касается:

• Платформы: Windows 10, Windows 7, Windows 8, Windows XP, Windows Vista
• Версии Java: 7.0, 8.0

Во время установки Java с сайта Java.com отображается диалоговое окно с одним из следующих кодов ошибки:

MSI поврежден, 25025, файл java_sp.dll поврежден, 1035, 1305, 1311, 1324, 1327, 1335, 1600, 1601, 1606, 1624, 1643, 1722, 1744, 1788, 2352, 2753, 2755 и 1618

Эти сообщения отображаются во время установки и указывают на то, что установка не завершена.

• Запустите утилиту Microsoft, чтобы исправить поврежденные ключи реестра, которые не позволяют полностью удалить программы или блокируют установку и обновление программ.
• Загрузите и установите автономный установочный пакет.

Ошибка: поврежденный MSI

Эта ошибка чаще возникает в системах Windows XP.
Пользователям Windows XP рекомендуется обновить Windows до пакета обновления 3 (SP3), чтобы можно было успешно загрузить и установить Java.

Эта ошибка возникает в том случае, когда на жестком диске нет такого количества свободного места, которое является достаточным для создания временных файлов в процессе установки программы.

С целью решения возникшей проблемы рекомендуется освободить дополнительное рабочее пространство на диске. При этом можно использовать приложение «Очистка диска» или удалить ненужные временные файлы вручную.

Для того чтобы временные файлы удалить вручную, следует выполнить следующие действия:

Во-первых, запустите программу «Проводник Windows».

Во-вторых, найдите папку WindowsTemp, на том логическим диске, на котором сейчас установлена операционная система.

В-третьих, в строке меню Проводника в разделе «Правка» выберите пункт «Выделить все».

Починим все.

«Ошибка программы установки 112: программе установки не удается извлечь и скопировать все файлы, необходимые для продолжения установки».

Эта ошибка возникает в том случае, когда на жестком диске нет такого количества свободного места, которое является достаточным для создания временных файлов в процессе установки программы.

С целью решения возникшей проблемы рекомендуется освободить дополнительное рабочее пространство на диске. При этом можно использовать приложение «Очистка диска» или удалить ненужные временные файлы вручную.

Для того чтобы временные файлы удалить вручную, следует выполнить следующие действия:

Во-первых, запустите программу «Проводник Windows».

Во-вторых, найдите папку WindowsTemp, на том логическим диске, на котором сейчас установлена операционная система.

В-третьих, в строке меню Проводника в разделе «Правка» выберите пункт «Выделить все».

В-четвертых, удалите все имеющиеся в папке файлы с помощью комбинации клавиш «Shift+Delete». Чтобы подтвердить удаление файлов нажмите кнопку «Да».

Источник

java error code 112

Ошибки загрузки: MSI поврежден, файл java_sp.dll поврежден, 1305, 2755, 1606, 25025, 1618

Этот раздел касается:

• Платформы: Windows 10, Windows 7, Windows 8, Windows XP, Windows Vista
• Версии Java: 7.0, 8.0

Во время установки Java с сайта Java.com отображается диалоговое окно с одним из следующих кодов ошибки:

MSI поврежден, 25025, файл java_sp.dll поврежден, 1035, 1305, 1311, 1324, 1327, 1335, 1600, 1601, 1606, 1624, 1643, 1722, 1744, 1788, 2352, 2753, 2755 и 1618

Эти сообщения отображаются во время установки и указывают на то, что установка не завершена.

• Запустите утилиту Microsoft, чтобы исправить поврежденные ключи реестра, которые не позволяют полностью удалить программы или блокируют установку и обновление программ.
• Загрузите и установите автономный установочный пакет.

Ошибка: поврежденный MSI

Эта ошибка чаще возникает в системах Windows XP.
Пользователям Windows XP рекомендуется обновить Windows до пакета обновления 3 (SP3), чтобы можно было успешно загрузить и установить Java.

Эта ошибка возникает в том случае, когда на жестком диске нет такого количества свободного места, которое является достаточным для создания временных файлов в процессе установки программы.

С целью решения возникшей проблемы рекомендуется освободить дополнительное рабочее пространство на диске. При этом можно использовать приложение «Очистка диска» или удалить ненужные временные файлы вручную.

Для того чтобы временные файлы удалить вручную, следует выполнить следующие действия:

Во-первых, запустите программу «Проводник Windows».

Во-вторых, найдите папку WindowsTemp, на том логическим диске, на котором сейчас установлена операционная система.

В-третьих, в строке меню Проводника в разделе «Правка» выберите пункт «Выделить все».

Починим все.

«Ошибка программы установки 112: программе установки не удается извлечь и скопировать все файлы, необходимые для продолжения установки».

Эта ошибка возникает в том случае, когда на жестком диске нет такого количества свободного места, которое является достаточным для создания временных файлов в процессе установки программы.

С целью решения возникшей проблемы рекомендуется освободить дополнительное рабочее пространство на диске. При этом можно использовать приложение «Очистка диска» или удалить ненужные временные файлы вручную.

Для того чтобы временные файлы удалить вручную, следует выполнить следующие действия:

Во-первых, запустите программу «Проводник Windows».

Во-вторых, найдите папку WindowsTemp, на том логическим диске, на котором сейчас установлена операционная система.

В-третьих, в строке меню Проводника в разделе «Правка» выберите пункт «Выделить все».

В-четвертых, удалите все имеющиеся в папке файлы с помощью комбинации клавиш «Shift+Delete». Чтобы подтвердить удаление файлов нажмите кнопку «Да».

Источник

2
Error Codes and Descriptions

This section lists each TopLink error code. Each error entry contains a description of the error , the probable cause , and the recommended action . Each error code corresponds to an exception class. See «Runtime and Development Exceptions» for more information.

Format:

A description shown in the actual exception thrown.

Cause: The most probable cause for the error.

Action: Suggestions for resolving the error.

Descriptor Exceptions (1 — 176)

Error code: 1

Cause: attributeName > is not declared as type ValueHolderInterface but the mapping uses indirection. Mapping is set to use indirection but the related attribute is not defined as type ValueHolderInterface . It is thrown on foreign reference mappings.

Action: If you want to use indirection on the mapping, change the attribute to type ValueHolderInterface . Otherwise, change the mapping associated with the attribute so that it does not use indirection.

Error code: 2

Cause: attributeName > is declared as type ValueHolderInterface but the mapping is not using indirection. Attribute is defined to be of type ValueHolderInterface but the mapping is not set to use indirection. It is thrown on foreign reference mappings.

Action: If you do not want to use indirection on the mapping, change the attribute to not be of type ValueHolderInterface . Otherwise, change the mapping associated with the attribute to use indirection.

Error code: 6

Cause: Attribute name is missing or not specified in the mapping definition.

Action: Specify the attribute name in the mapping by calling method setAttributeName(String attribute name) .

Error code: 7

Cause: attributeName > should be defined as type Vector, or a type that implements Map or Collection if using Java 2. It happens in one to many mapping, many to many mapping and collection mapping when mapping is set not to use indirection and attribute type is not declared of type java.util.Vector .

Action: Declare the attribute to be of type java.util.Vector .

Error code: 8

Cause: The class indicator field has not been defined, however the descriptor has been set to use inheritance. When using inheritance, a class indicator field or class extraction method must be set. The class indicator field is used to create the right type of domain object

Action: Either a class indicator field or class extraction method must be set.

Error code: 9

Cause: The direct field name from the target table is not set in the direct collection mapping. The field values form the collection in this mapping.

Action: Specify the direct field name by calling method setDirectFieldName(String fieldName) .

Error code: 10

Cause: The field name is not set in the mapping. It is thrown from direct to field mapping, array mapping and structure mapping.

Action: Specify the field name by calling method setFieldName(String fieldName) .

Error code: 11

Cause: One to one mapping foreign key defined incorrectly. Multiple foreign key fields were set for one to one mapping by calling method setForeignKeyFieldName(String fieldName) .

Action: Use method addForeignKeyFieldName(String sourceForeignKeyName, String targetPrimaryKeyFieldName) to add multiple foreign key fields.

Error code: 12

Cause: The descriptor must use an identity map to use the Check cache does exist option. Descriptor has been set to not use identity map but the existence checking is set to be done on identity map.

Action: Either use identity map or set the existence checking to some other option.

Error code: 13

Cause: attributeName > instance variable in object objectName > is inaccessible. Instance variable in the domain object is not accessible. This exception is thrown when TopLink tries to access the instance variable using Java reflection. The error is purely Java exception and TopLink only wraps the reflection exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 14

Cause: Problem in cloning the object domainObject >. Clone method methodName > is not accessible. The method name specified using useCloneCopyPolicy(String cloneMethodName) or the clone() method to create clone on the domain object is not accessible by TopLink using Java reflection. The error is purely Java exception and TopLink only wraps the reflection exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 15

Cause: The domain class does not define a public default constructor, which is needed by TopLink to create new instances of the domain class.

Action: Define one or use different instantiation policy.

Error code: 16

Cause: The descriptor callback method eventMethodName > with DescriptorEvent as argument, is not accessible. This exception is thrown when TopLink tries to access the event method using Java reflection. The error is purely Java exception and TopLink only wraps the reflection exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 17

Cause: Trying to invoke inaccessible methodName > on the object objectName >. The underlying get accessor method to access an attribute in the domain object is not accessible. This exception is thrown when TopLink tries to access an attribute through method using Java reflection. The error is purely Java exception and TopLink only wraps the reflection exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 18

Cause: The method used by the Transformation mapping using a ValueHolder is illegal. This exception is thrown when TopLink tries to access the method using Java reflection. The problem is caused when method base value holder is getting instantiated.

Action: Inspect the internal exception and check the Java manuals.

Error code: 19

Cause: On transformation mapping the underlying attribute method used to retrieve value from the database row while reading transformation mapped attribute is not accessible.

Action: Inspect the internal exception and check the Java manuals.

Error code: 20

Cause: On transformation mapping the method methodName > used to retrieve value from the object while writing transformation mapped attribute is not accessible. The error is purely Java exception and TopLink only wraps the reflection exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 21

Cause: Problem in extracting class from row >; Static method method > with databaseRow > as argument, is not accessible. The method to extract class from row on the domain object is not accessible. The error is purely Java exception and TopLink only wraps the reflection exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 22

Cause: Problem in creating new instance; the method methodName > to create instances on the domain class is not accessible. The error is purely Java exception and TopLink only wraps the reflection exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 23

Cause: The descriptor callback method eventMethodName > with Session as argument, is inaccessible. This exception is thrown when TopLink tries to access the event method using Java reflection. The error is purely Java exception and TopLink only wraps the reflection exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 24

Cause: The attributeName > instance variable in the object objectName > is not accessible through Java reflection. The error is thrown by Java and TopLink only wraps the reflection exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 25

Cause: Trying to invoke inaccessible method setMethodName > on the object with parameter parameter >. The attribute’s set accessor method is not accessible through Java reflection. The error is thrown by Java and TopLink only wraps the reflection exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 26

Cause: Trying to get a value for an instance variable attributeName > of type typeName > from the object. The specified object is not an instance of the class or interface declaring the underlying field. An object is accessed to get the value of an instance variable that does not exist.

Action: Inspect the internal exception and check the Java manuals.

Error code: 27

Cause: Trying to invoke method methodName > on the object objectName >. The get accessor method declaration on the domain object differs from the one that is defined. The number of actual and formal parameters differ, or an unwrapping conversion has failed.

Action: Inspect the internal exception and check the Java manuals.

Error code: 28

Cause: The method used by the method-based proxy in a Transformation mapping is getting illegal arguments when the value holder is getting instantiated. This exception is thrown when TopLink tries to access the method using Java reflection.

Action: Inspect the internal exception and check the Java manuals.

Error code: 29

Cause: The number of actual and formal parameters differ, or an unwrapping conversion has failed. On transformation mapping the method used to retrieve value from the database row while reading transformation mapped attribute is getting illegal argument.

Action: Inspect the internal exception and check the Java manuals.

Error code: 30

Cause: The number of actual and formal parameters differ for method methodName > or an unwrapping conversion has failed. On transformation mapping the method used to retrieve value from the object while writing transformation mapped attribute is getting illegal argument. The error is purely Java exception and TopLink only wraps the reflection exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 31

Cause: he number of actual and formal parameters for the descriptor callback method eventMethodName > differs, or an unwrapping conversion has failed. The callback event method is invoked with illegal argument. This exception is thrown when TopLink tries to invoke the event method using Java reflection. The error is a purely Java exception and TopLink only wraps the reflection exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 32

Cause: Illegal value is being assigned to the attribute instance variable. Trying to set a value value > for an instance variable attributeName > of type typeName > in the object. The specified object is not an instance of the class or interface declaring the underlying field, or an unwrapping conversion has failed.

TopLink does the assignment of value by using Java reflection. Java throws the error and TopLink only wraps the reflection exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 33

Cause: Illegal argument is being passed to the attribute’s set accessor method. Trying to invoke method setMethodName > on the object. The number of actual and formal parameters differs, or an unwrapping conversion has failed. Java throws the error and TopLink only wraps the reflection exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 34

Cause: he class does not define a public default constructor, or the constructor raised an exception. The default constructor for the domain object is invoked to create new instance of the object while building new domain objects. If this Class represents an abstract class, an interface, an array class, a primitive type, or void; or if the instantiation fails for some other reason. Java throws the error and TopLink only wraps the reflection exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 35

Cause: This is an exception that an application should never encounter. The exception can occur at the time of developing TopLink. In cases where one writes new mapping it is possible to get this exception. In direct collection mapping and many to many mapping the target table and relational table are populated at the end of the commit process and if data modification event is sent to any other mapping then this exception is thrown.

Action: Contact Technical Support.

Error code: 36

Cause: This is an exception that an application should never encounter. The exception can occur at the time of developing TopLink. In cases where one writes new mapping it is possible to get this exception. In direct collection mapping and many to many mapping the target table and relational table are populated at the end of the commit process and if data modification event is sent to these two mappings with wrong event code then this exception is thrown.

Action: Contact Technical Support.

Error code: 37

Cause: This is an exception that an application should never encounter. The exception can occur at the time of developing TopLink. The exception means that descriptor event manager does not support the event code passed in the event.

Action: Contact Technical Support.

Error code: 38

Cause: Identity map constructor failed because an invalid identity map was specified. The identity map class given in the descriptor cannot be instantiated. The exception is Java exception thrown by Java reflection when TopLink is instantiating the identity map class. TopLink only wraps the Java exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 39

Cause: The descriptor does not define a Java class. The Java class is not specified in the descriptor.

Action: Specify the Java Class

Error code: 40

Cause: A descriptor for the referenced interface is not added to the session.

Action: Add that descriptor to the session.

Error code: 41

Cause: A non-read-only mapping is not defined for the sequence number field. A mapping is required so that TopLink can put and extract values for the primary key.

Action: Define a mapping.

Error code: 43

Cause: Missing class for indicator field value classFieldValue > of type type >. There was no class entry found in the inheritance policy for the indicator field value read from the database. Probably the method addClassIndicator(Class class, Object typeValue) was not called for the field value. The class and typeValue is stored in the hashtable and later on the class is extracted from the hashtable by passing typeValue as a key. Remember Integer(1) is not equal to Float(1), this is another major reason for this problem when the type of typeValue is different.

Action: Check descriptor.

Error code: 44

Cause: The class indicator field is missing from the database row row > that was read from the database. This is done in inheritance model where after reading rows from the database, child domain objects are to be constructed depending upon the type indicator values.

Action: Check the printed row to make sure the spelling is correct.

Error code: 45

Cause: Missing mapping for field field >; a mapping for the field is not specified.

Action: Define a mapping for the field.

Error code: 46

Cause: A mapping for the primary key is not specified. There should be one non-read-only mapping defined for the primary key field.

Action: efine a mapping for the primary key.

Error code: 47

Cause: The multiple table primary key mapping must be specified when a custom multiple table join is used. If multiple tables are specified in the descriptor and the join expression is customized then the primary keys for all the tables must be specified. If the primary keys are not specified then the exception is caused.

Action: Call method addMultipleTablePrimaryKeyFieldName(String fieldNameInPrimaryTable, String fieldNameInSecondaryTable) on the descriptor to set the primary keys.

Error code: 48

Cause: There are multiple writable mappings for the field fieldName > in the descriptor. Exactly one must be defined writable. The others must be specified as read-only. When multiple write mappings are defined for the field, TopLink cannot decide on which mapping to pick up for writing the value of the field in the database row hence the exception is thrown during the validation process of descriptors. The most common site for this problem is that sometimes the field has direct-to-field mapping and also one-to-one mapping. In this case if direct-to-field mapping has to be kept then one-to-one mapping should either be read-only or it should be target foreign key reference.

Action: Make one of those mappings read only.

Error code: 49

Cause: The attribute transformation method name in the transformation mapping is not specified. This method is invoked internally by TopLink to retrieve value to store in the domain object.

Action: Define a method and set the method name on the mapping by calling method setAttributeTransformation(String methodName) .

Error code: 50

Cause: No field name is specified in direct-to-field mapping.

Action: Set the field by calling setFieldName(String FieldName) .

Error code: 51

Cause: Neither the selection criteria nor the foreign keys were specified on one-to-one mapping. If the selection criterion is not specified then TopLink tries to build one from the foreign keys specified in the mapping.

Action: Specify the fields.

Error code: 52

Cause: No query key named: queryKey > found in: descriptor >; no reference key from the target table is specified on direct collection mapping.

Action: Specify the fields by calling method setReferenceKeyFieldName(String fieldName) .

Error code: 53

Cause: The relation table name is not set in this many-to-many mapping.

Action: Set relation table name by calling method setRelationTableName(String tableName) .

Error code: 54

Cause: There are no source relation keys specified in this many-to-many mapping.

Action: Add source relation keys to the mapping.

Error code: 55

Cause: The descriptor callback method selector > on the domain class was not found. It must take a Session or a DescriptorEvent as its argument. TopLink tries to invoke the method using Java reflection. It is a Java exception and TopLink is only wrapping the main exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 56

Cause: The method attributeMethodName > with parameters databaseRow > or databaseRow , session > is not found. TopLink wraps the Java reflection exception that is caused when the method is being created from the method name. This method is set by calling setAttributeMethodName(String aMethodName) .

Action: Inspect the internal exception and check the Java manuals.

Error code: 57

Cause: Inaccessible constructor. TopLink wraps the Java reflection exception that is caused when it is creating a new instance of the domain.

Action: Inspect the internal exception and check the Java manuals.

Error code: 58

Cause: Method methodName > not found with parameters () or (Session). TopLink wraps the Java reflection exception that is caused when it is creating a Method type from the method names in transformation mapping.

Action: Inspect the internal exception and check the Java manuals.

Error code: 59

Cause: The instance variable attributeName > is not defined in the domain class or it is not accessible. TopLink wraps the Java reflection exception that is caused when it is creating a Field type from the attribute name.

Action: Inspect the internal exception and check the Java manuals.

Error code: 60

Cause: The accessor method setMethodName > or getMethodName > is not defined for the attribute in the domain class javaClassName >, or it is not accessible. TopLink wraps the Java reflection exception that is caused when it is creating a Method type from the method name.

Action: Inspect the internal exception and check the Java manuals.

Error code: 61

Cause: The static class extraction method methodName > with databaseRow > as argument does not exist, or is not accessible. Java reflection exception wrapped in TopLink exception is thrown when class extraction method is being created from the method name in inheritance policy.

Action: Inspect the internal exception and check the Java manuals.

Error code: 62

Cause: The clone method methodName > with no arguments does not exist, or is not accessible. Java reflection exception wrapped in TopLink exception is thrown when a method to create clones is being created from the method name in copy policy.

Action: Inspect the internal exception and check the Java manuals.

Error code: 63

Cause: The instance creation method methodName > with no arguments does not exist, or is not accessible. Java reflection exception wrapped in TopLink exception is thrown when a method to create new instances is being created from the method name in instantiation policy.

Action: Inspect the internal exception and check the Java manuals.

Error code: 64

Cause: The foreign keys in the target table are not specified in one-to-many mappings. These fields are not required if a selection criterion is given in the mapping but otherwise they must be specified.

Action: Set target foreign keys or selection criteria.

Error code: 65

Cause: There are no target relation keys specified in many-to-many mappings.

Action: Call method addTargetRelationKeyFieldName(String targetRelationKeyFieldName, String targetPrimaryKeyFieldName) to set the fields.

Error code: 66

Cause: The object cannot be de-serialized from the byte array read from the database. The exception is thrown when serialized object mapping is converting byte array into object.

Action: Inspect the internal exception and check the Java manuals.

Error code: 67

Cause: The object cannot be serialized into byte array. The exception is thrown when serialized object mapping is object into byte array.

Action: Inspect the internal exception and check the Java manuals.

Error code: 68

Cause: Value of aggregate in the source object object > is null. Null values not allowed for aggregate mappings unless allow null is specified in aggregate mapping.

Action: Call method allowNull( ) on the mapping.

Error code: 69

Cause: An object is accessed to get the value of an instance variable through Java reflection. This exception is thrown only on some VMs.

Action: Inspect the internal exception and check the Java manuals.

Error code: 70

Cause: The get accessor method is invoked to get the value of attribute through Java reflection. This exception is thrown only on some VMs.

Action: Inspect the internal exception and check the Java manuals.

Error code: 71

Cause: Null Pointer Exception is thrown while setting value of attributeName > instance variable in the object to value. An object is accessed to set the value of an instance variable through Java reflection. This exception is thrown only on some VMs.

Action: Inspect the internal exception and check the Java manuals.

Error code: 72

Cause: Null Pointer Exception is thrown while setting value through setMethodName > method in the object with argument . The set accessor method is invoked to set the value of attribute through Java reflection. This exception is thrown only on some VMs.

Action: Inspect the internal exception and check the Java manuals.

Error code: 73

Cause: Cannot find descriptor for parent class. The descriptor of a subclass has no parent descriptor.

Action: The method setParentClass(Class parentClass) on the subclass descriptor must be called.

Error code: 74

Cause: The primary key fields are not set for this descriptor.

Action: Add primary key field names using method setPrimaryKeyFieldName(String fieldName) or setPrimaryKeyFieldName(String fieldName) .

Error code: 75

Cause: The reference class is not specified in the foreign reference mapping.

Action: Set reference class by calling method setReferenceClass(Class aClass)

Error code: 77

Cause: The referenced descriptor for className > should be set to aggregate descriptor. An aggregate mapping should always reference a descriptor that is aggregate.

Action: Call method descriptorIsAggregate() on the referenced descriptor.

Error code: 78

Cause: The table for the reference field must be the reference table. If the reference field name specified in the direct collection mapping is qualified with the table name then the table name should match the reference table name.

Action: Qualify the field with the proper name or change the reference table name.

Error code: 79

Cause: The reference table name in the direct collection mapping is not specified.

Action: Use method setReferenceTableName(String tableName) on the mapping to set the table name.

Error code: 80

Cause: The table for the relation key field must be the relation table. If the source and target relation fields name specified in the many to many mapping are qualified with the table name then the table name should match the relation table name.

Action: Qualify the field with the proper name or change the relation table name.

Error code: 81

Action: Check the method and make appropriate changes.

Error code: 82

Cause: The descriptor callback method selector > with DescriptorEvent as argument is not accessible. Java throws security exception when a Method type is created from the method name using Java reflection. The method is a descriptor event callback on the domain object that takes DescriptorEvent as its parameter.

Action: Inspect the internal exception and check the Java manuals.

Error code: 83

Cause: The descriptor callback method selector > with session > as argument is not accessible. Java throws security exception when a Method type is created from the method name using Java reflection. The method is a descriptor event callback on the domain object which takes class and session as its parameters.

Action: Inspect the internal exception and check the Java manuals.

Error code: 84

Action: Inspect the internal exception and check the Java manuals.

Error code: 85

Cause: Method: methodName > ACCESS DENIED with <> or parameters. Java throws security exception when a Method type is created from the method name using Java reflection. These are the methods that will extract the field value from the domain object in the transformation mapping.

Action: Inspect the internal exception and check the Java manuals.

Error code: 86

Cause: Access to the instance variable, attributeName > in the class javaClassName > is denied. Java throws security exception when creating Field type from the given attribute name using Java reflection.

Action: Inspect the internal exception and check the Java manuals.

Error code: 87

Cause: The methods setMethodName > and getMethodName > in the object javaClassName > are inaccessible. Java throws security exception when creating Method type from the given attribute accessor method name using Java reflection.

Action: Inspect the internal exception and check the Java manuals.

Error code: 88

Cause: The static class extraction method methodName > with DatabaseRow as argument is not accessible. Java throws security exception when creating Method type from the given class extraction method name using Java reflection. The method is used to extract class from the database row in inheritance policy.

Action: Inspect the internal exception and check the Java manuals.

Error code: 89

Cause: The clone method methodName > with no arguments is not accessible. Java throws security exception when creating Method type from the given method name using Java reflection. This method on copy policy is used to create clones of the domain object.

Action: Inspect the internal exception and check the Java manuals.

Error code: 90

Cause: The instance creation method methodName > with no arguments is not accessible. Java throws security exception when creating Method type from the given method name using Java reflection. This method on instantiation policy is used to create new instances of the domain object.

Action: Inspect the internal exception and check the Java manuals.

Error code: 91

Cause: Either the sequence field name or the sequence number name is missing. To use sequence generated ids both the sequence number name and field name properties must be set.

Action: To use sequence-generated ids, both the sequence number name and field name properties must be set.

Error code: 92

Cause: The size of the primary keys on the target table does not match the size of the foreign keys on the source in one to one mapping.

Action: Check the mapping and the reference descriptor’s primary keys.

Error code: 93

Cause: The table tableName > is not present in the descriptor.

Action: Check the qualified field names specified in the mappings and descriptor, if these fields are qualified with the table name then those fields should have right table.

Error code: 94

Cause: No table is specified in the descriptor. Descriptor must have a table name defined.

Action: Call method addTableName(String tableName) or setTableName(String tableName) to set the tables on the descriptor.

Error code: 96

Cause: The size of the foreign keys on the target table does not match the size of the source keys on the source table in one to many mapping.

Action: Check the mapping.

Error code: 97

Cause: Problem in cloning the object domainObject > clone method. methodName > triggered an exception. Java is throwing exception when clone method is invoked using Java reflection while cloning object. The clone method is specified on the copy policy that is usually invoked to create clones in unit of work.

Action: Inspect the internal exception and check the Java manuals.

Error code: 98

Cause: The underlying descriptor callback method eventMethodName > with DescriptorEvent as argument, throws an exception. Java is throwing exception when descriptor event method is invoked using Java reflection.

Action: Inspect the internal exception and check the Java manuals.

Error code: 99

Cause: The method methodName > on the object objectName > is throwing an exception. Java is throwing exception while getting an attribute value from the object through method accessor.

Action: Inspect the internal exception and check the Java manuals.

Error code: 100

Cause: Method has thrown an exception. Java is throwing exception while instantiating method based proxy. This happens while instantiating transformation mapping.

Action: Inspect the internal exception and check the Java manuals.

Error code: 101

Cause: The underlying method throws an exception. Java is throwing exception while invoking attribute transformation method on transformation mapping. The method is invoked to extract value from the database row to set into the domain object.

Action: Inspect the internal exception and check the Java manuals.

Error code: 102

Cause: The method methodName > is throwing an exception. Java is throwing exception while invoking field transformation method on transformation mapping. The method is invoked to extract value from the domain object to set into the database row.

Action: Inspect the internal exception and check the Java manuals.

Error code: 103

Cause: Problem in extracting class from row row >, static method, method > with databaseRow as argument >. An exception was triggered Java is throwing exception while invoking class extraction method. The method is used to extract class type so that right kind of object can be created in inheritance model.

Action: Inspect the internal exception and check the Java manuals.

Error code: 104

Cause: Problem in creating new instance. Creation method methodName > caused an exception. Java is throwing exception while invoking instantiation method. The method is used to create new instances of the domain objects.

Action: Inspect the internal exception and check the Java manuals.

Error code: 105

Cause: The underlying descriptor callback method eventMethodName > with session > as argument, throws an exception. Java is throwing exception while invoking descriptor event method that takes session as its parameter.

Action: Inspect the internal exception and check the Java manuals.

Error code: 106

Cause: The method setMethodName > on the object is throwing an exception. Java is throwing exception while invoking set accessor method on the domain object to set an attribute value into the domain object.

Action: Inspect the internal exception and check the Java manuals.

Error code: 108

Cause: The indicator value is not found in the class indicator mapping in the parent descriptor for the class.

Action: Check addClassIndicator(Class childClass, Object typeValue) on the inheritance policy.

Error code: 109

Cause: The child descriptor should not have a write lock field defined because it gets it from the parent descriptor.

Action: Check your child descriptor and remove the field.

Error code: 110

Cause: The descriptor for the reference class className > is missing from the mapping.

Action: Check session to see if the descriptor for the reference class was added.

Error code: 111

Cause: Multiple table primary key field names must be fully qualified. These fields names are given on the descriptor if it has more than one table.

Action: Specify the field names with table name.

Error code: 112

Cause: Only one table can be added through this method.

Action: Use addTableName(String tableName) to add multiple tables to descriptor.

Error code: 113

Cause: Inaccessible constructor. Java is throwing this exception while invoking a default constructor to create new instances of the domain object.

Action: Inspect the internal exception and check the Java manuals.

Error code: 114

Cause: Problem in creating new instance methodName > creation method is not accessible. Java is throwing an exception while calling a method to build new instance of the domain object. This method is given by the user to override the default behavior of creating new instances through class constructor.

Action: Inspect the internal exception and check the Java manuals.

Error code: 115

Cause: The field conversion value for the attribute value attributeValue > was not given in the object type mapping.

Action: Check the attribute value and provide a corresponding field value in the mapping.

Error code: 116

Cause: The attribute conversion value for the fieldValue > was not given in the object type mapping.

Action: Check the field value and provide a corresponding attribute value in the mapping.

Error code: 118

Cause: The domain object className > cannot have a read only mapping for the write lock fields when the version value is stored in the object.

Action: Check the mappings on write lock fields.

Error code: 119

Cause: The domain object className > should have a read only mapping for the write lock fields when the version value is stored in the cache.

Action: Check the mappings on write lock fields.

Error code: 120

Cause: The queryKey is defined in the parent descriptor but not in the child descriptor. The descriptor has not defined abstract query key.

Action: Any implementors of interface descriptor must define the query key defined by abstract query key in the interface descriptor.

Error code: 122

Cause: The interface descriptor

must have at least one abstract query key defined. The string given to the method setExistenceChecking(String token) is not understood.

Action: The string passed should be one of the following:

Error code: 125

Cause: The mapping for the attribute uses indirection and must be initialized to a new ValueHolder.

Action: Ensure the mapping uses indirection and the attribute is initialized to a new valueHolder .

Error code: 126

Cause: No sub-class matches this class when inheritance is in aggregate relationship mapping.

Action: Verify the sub-class and the relationship mapping.

Error code: 127

Cause: The get method return type for the attribute mapping.getAttributeName () is not declared as type ValueHolderInterface , but the mapping is using indirection.

Action: Ensure the get method returns a ValueHolder or change the mapping to not use indirection.

Error code: 128

Cause: The get method return type for the attribute mapping.getAttributeName() is declared as type ValueHolderInterface , but the mapping is not using indirection.

Action: Ensure the mapping is using indirection or change the return type from ValueHolder

Error code: 129

Cause: The set method parameter type for the attribute mapping.getAttributeName() is not declared as type ValueHolderInterface , but the mapping is using indirection.

Action: Ensure the set method parameter is declared as a ValueHolder or the mapping is changed to not use indirection.

Error code: 130

Cause: The set method parameter type for the attribute mapping.getAttributeName() is declared as type ValueHolderInterface , but the mapping is not using indirection.

Action: Ensure the mapping is changed to use indirection or the set method parameter is not declared as a ValueHolder .

Error code: 131

Cause: he get method return type for the attribute mapping.getAttributeName() should be declared as type Vector (or a type that implements Map or Collection, if using Java2).

Action: The get method return type for the attribute should be declared as type Vector (or a type that implementsMap or Collection, if using Java2).

Error code: 133

Cause: The set method parameter type for the attribute mapping.getAttributeName() should be declared as type Vector (or a type that implements Map or Collection, if using Java2).

Action: The set method parameter type for the attribute should be declared as type Vector (or a type that implements Map or Collection, if using Java2).

Error code: 135

Cause: The table in the multiple table foreign key relationship refers to an unknown table.

Action: Verify the table name.

Error code: 138

Cause: The attribute mapping.getAttributeName() is not declared as a super-type of validTypeName , but the mapping is using transparent indirection.

Action: Verify the attribute’s type and the mapping setup.

Error code: 139

Cause: The get method return type for the attribute mapping.getAttributeName() is not declared as a super-type of validTypeName , but the mapping is using transparent indirection.

Action: Verify the attribute’s type and the mapping setup.

Error code: 140

Cause: The set method parameter type for the attribute mapping.getAttributeName() is not declared as a super-type of validTypeName , but the mapping is using transparent indirection.

Action: Verify the attribute’s type and the mapping setup.

Error code: 141

Cause: Field is not present in the table in the database.

Action: Verify the field name for the attribute.

Error code: 142

Cause: descriptor.getTableName() is not present in the database.

Action: Verify the table name for the descriptor.

Error code: 143

Cause: The multiple table insert order Vector specified aDescriptor.getMultipleTableInsertOrder() , has more/fewer tables than are specified in the descriptor aDescriptor.getTables() . All the tables must be included in the insert order Vector.

Action: Verify that all table names for the descriptor are present and that there are no extras.

Error code: 144

Cause: Transparent Indirection can only be used with CollectionMappings.

Action: Verify the mapping. It must be a collection mapping.

Error code: 145

Cause: The indirect container class must implement the constructor.

Action: Implement the constructor for the container.

Error code: 146

Cause: The indirect container class could not be instantiated using the constructor.

Action: Validate the constructor for the indirect container class.

Error code: 147

Cause: This container policy should only be used in JDK1.1: containerPolicy. It was instantiated for javaClass.

Action: Validate the container policy being used.

Error code: 148

Cause: The container policy is incompatible with transparent indirection.

Action: Change the container policy to be compatible with transparent indirection or do not use transparent indirection.

Error code: 149

Cause: No Indirection should not receive this message.

Action: Change to use no indirection.

Error code: 150

Cause: The mapping for the attribute mapping.getAttributeName() uses transparent indirection and must be initialized to an appropriate container.

Action: Initialize the mapping to an appropriate container.

Error code: 151

Cause: Invalid mapping operation.

Action: Check the documentation for valid mapping operations.

Error code: 152

Cause: Invalid indirection policy operation.

Action: Check the documentation for valid indirection policy operations.

Error code: 153

Cause: The reference descriptor for should be set to aggregate collection descriptor.

Action: Set the reference descriptor to an aggregate collection descriptor.

Error code: 154

Cause: Invalid indirection container class.

Action: Verify the container class.

Error code: 155

Cause: The mapping does not include a foreign key field linked to the primary key field.

Action: Link the foreign key to the appropriate primary key.

Error code: 156

Cause: The structure name is not set.

Action: Set the structure name appropriately.

Error code: 157

Cause: Normal descriptors do not support non-relational extensions.

Action: Contact Technical Support.

Error code: 158

Cause: The descriptor’s parent class has been set to itself.

Action: Contact Technical Support.

Error code: 159

Cause: An attempt to use proxy indirection has been made but JDK 1.3 is not being used.

Action: Proxy indirection is only supported in JDK 1.3

Error code: 160

Cause: The attribute wasn’t specified in the list of interfaces given to use Proxy Indirection.

Action: Verify the attribute

Error code: 161

Cause: The return type for the indirection policy is invalid for the indirection policy.

Action: Verify that the parameter type of the attribute’s get method is correct for the indirection policy.

Error code: 162

Cause: The parameter for the set method is incorrect for the indirection type.

Action: Verify that the parameter type of the attribute’s set method is correct for the indirection policy.

Error code: 163

Cause: The container policy is invalid for the collection type.

Action: Check that the container policy is correct for the collection type.

Error code: 164

Cause: The amendment method provided is invalid, not public, or cannot be found.

Action: Ensure the amendment method is public, static, returns void and has a single argument: Descriptor.

Error code: 165

Cause: The specified amendment method threw an exception.

Action: Examine the returned exception for further details.

Error code: 166

Cause: There is no mapping for attribute.

Action: Validate the mapping and attribute.

Error code: 168

Cause: Constructor is missing.

Action: Make the required constructor.

Error code: 169

Cause: Constructor is missing.

Action: Make the required constructor.

Error code: 170

Cause: Permissions do not permit access to the constructor.

Action: Adjust the Java security permissions to permit access to the constructor.

Error code: 171

Cause: An instantiation failed inside the associated constructor.

Action: Determine which objects are being instantiated, and ensure all are being done properly.

Error code: 172

Cause: A message send invoked from inside the constructor is invalid because the method does not exist.

Action: Correct the message send ensuring that the message exists.

Error code: 173

Cause: A message is being sent from inside a constructor to a null object.

Action: Avoid sending a message to an object that is null.

Error code: 174

Cause: A message is being sent to an object from inside a factory instantiation. Java has determined this message to be illegal.

Action: Determine why the message send is illegal, and replace the message with the proper legal one.

Error code: 175

Cause: Error inside the factory associated with the invocation of a target.

Action: Determine the faulty target, and replace with the correct target, or proper message send.

Error code: 176

Cause: A message is being sent to null inside a factory instantiation.

Action: Avoid sending a message to null.

Builder Exceptions (1001 — 1042)

Error code: 1001

Cause: Tokens in the builder generated files are the subsets of all the tokens a Project Reader can understand. Each token has a related public method on TopLink. The exception would mean that the method name is incorrect.

Action: If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1002

Could not find post load method methodName > on class

Cause: The post load method defined in descriptor properties is not defined on the related domain class.

Action: Must define the method on the specified class.

Error code: 1003

Cannot write parameter of class

Cause: While creating project class the parameter tokens are read from the file and are converted to actual types before sending them to the methods. An unknown type will cause this exception.

Action: If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1004

Could not access method method >

Cause: Java is throwing an illegal access reflection exception while invoking the method on the object. TopLink only wraps that exception.

Action: Inspect the internal exception and check the Java manuals. If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1005

Cause: Java is throwing an invocation reflection exception while invoking the method on the object. TopLink only wraps that exception.

Action: Inspect the internal exception and check the Java manuals. If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1006

Invalid arguments invoking: applyResultMethod > with receiver >

Cause: Java is throwing an invalid argument reflection exception while invoking the method on the object. TopLink only wraps that exception.

Action: Inspect the internal exception and check the Java manuals. If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1007

Could not access applyResultMethod > with receiver >

Cause: Java is throwing reflection exception while invoking the method on the object. TopLink only wraps that exception.

Action: Inspect the internal exception and check the Java manuals. If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1008

Parameter mismatch method >; received size > parameters

Cause: The number of parameters for the token read from the project or descriptor file do not match the number of parameters a related method can take.

Action: If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1009

Accessing methodName > on className > with parameters >

Cause: Java is throwing reflection exception while invoking the method on the object. TopLink only wraps that exception.

Action: Inspect the internal exception and check the Java manuals. If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1010

Could not find section definition section > when building section definitions for target >

Cause: Invalid section name was found in the project or descriptor file.

Action: If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1011

Could not convert object > into an accessible Java class.

Cause: The parameter read from the file cannot be converted to a appropriate type.

Action: If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1012

Cause: The project or descriptor file was not found.

Action: Check that the path was given correctly in a project reader and also the path is correct in project file.

Error code: 1013

Invalid class/method name format.

Cause: No one should actually be using the URL way of reading INI files. This is untested and undocumented feature.

Action: Use other ways of reading files.

Error code: 1015

Open failed for URL url >

Cause: Open failed for URL.

Action: Inspect the internal exception and check the Java manuals.

Error code: 1016

Could not resolve INIFile location: sourceString > using search paths searchPaths >

Cause: The file was not found on the given search paths.

Action: Check your search paths.

Error code: 1017

Invoking method > on receiver >

Cause: Java is throwing reflection exception while invoking the method on the object. TopLink only wraps that exception.

Action: Inspect the internal exception and check the Java manuals. If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1018

Invoking method > on receiver >

Cause: Java is throwing reflection exception while invoking the method on the object. TopLink only wraps that exception.

Action: Inspect the internal exception and check the Java manuals. If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1019

Invalid character value; expecting $* format

Cause: An invalid character format was written to the file.

Action: If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1020

Action: If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1021

Cause: Unexpected character > found while reading vector values from the file.

Action: If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1022

Expecting object, found token

Cause: Unexpected token found while reading from the file.

Action: If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1023

Cause: Unexpected token found while reading from the file.

Action: If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1024

setExistenceChecking token >; not understood

Cause: Existence checking string specified on the descriptor is not understood.

Action: If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1025

Class className > not found

Cause: Java is throwing reflection exception while invoking the method on the object. TopLink only wraps that exception.

Action: Inspect the internal exception and check the Java manuals. If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1026

Not enough INI elements. Found count >.

Cause: If the line in an INI file is incomplete, i.e., it does not have enough tokens.

Action: If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1027

Too many INI elements. Found count >.

Cause: If the line in an INI file has more tokens then needed.

Action: If the project files are not manually edited and corrupted then this is usually an internal exception to TopLink and must be reported to Technical Support. But if the file was manually edited or corrupted then the files must be generated again.

Error code: 1028

Error writing writeString >

Cause: Could not write into the file. Perhaps / are used and file or directory structure does not exist.

Action: Inspect the internal exception and check the Java manuals. Try using .

Error code: 1029

Illegal access exception

Cause: Java is throwing reflection exception while invoking the method on the object. TopLink only wraps that exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 1030

Invocation target exception

Cause: Java is throwing reflection exception while invoking the method on the object. TopLink only wraps that exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 1031

Attempting to instantiate className > with default constructor.

Cause: Java is throwing reflection exception while instantiating the object. TopLink only wraps that exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 1032

Attempting to instantiate className > with default constructor.

Cause: Java is throwing reflection exception while instantiating the object. TopLink only wraps that exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 1033

IO Exception in next token

Cause: Java is throwing reflection. TopLink only wraps that exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 1034

IOException on close.

Cause: Java is throwing reflection. TopLink only wraps that exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 1035

Invalid INI(URL) Method: method >. Should return a string.

Cause: No one should actually be using the URL way of reading INI files. This is untested and undocumented feature.

Action: Use other ways of reading files.

Error code: 1036

Could not cast using castString >.

Cause: An error occurred during an attempt to cast using the castString

Action: Validate the castString

Error code: 1037

A writer or a target file name must be specified

Cause: A writer or a target file name is not specified.

Action: A writer or a target file name must be specified.

Error code: 1039

IOException on open.

Cause: Java is throwing reflection. TopLink only wraps that exception.

Action: Inspect the internal exception and check the Java manuals.

Error code: 1040

Post Load Method Not Static

Cause: The method specified is not static.

Action: Modify the method to be static.

Error code: 1041

Project Not Found.

Cause: No projects were found in the specified directory.

Action: Verify the directory.

Error code: 1042

Multiple Projects With Name.

Cause: More than one project with the same name was found.

Action: Verify the project name.

Concurrency Exceptions (2001 — 2004)

Error code: 2001

Cause: In a multi threaded environment one of the waiting thread was interrupted.

Action: Usually such exceptions would mean restarting the application but it is totally dependent on the application.

Error code: 2002

Cause: Wait failure on ServerSession. When the number of non-pooled connections reach the threshold any more requests for such connection results in wait until some one releases the connection resource. If this wait was interrupted then an exception is thrown.

Action: Usually such exceptions would mean restarting the application but it is totally dependent on the application.

Error code: 2003

Cause: Wait failure on ClientSession. When the number of pooled connections reach the threshold any more requests for such connection results in wait until some one releases the connection resource. If this wait was interrupted then an exception is thrown.

Action: Usually such exceptions would mean restarting the application but it is totally dependent on the application.

Error code: 2004

Cause: A signal was attempted before wait on concurrency manager. This normally means that an attempt was made to commit or rollback a transaction before it was started, or to rollback a transaction twice.

Action: Check transactions in the application.

Conversion Exceptions (3001 — 3007)

Error code: 3001

Cause: The object object > of class objectClass > could not be converted to javaClass >. The object cannot be converted to given type.

Action: Check that the object being converted is of right type or not.

Error code: 3003

Cause: The date in dateString > is in an incorrect format. Expected format is YYYY-MM-DD .

Action: Check the date format.

Error code: 3004

Cause: The time in timeString > is in an incorrect format. Expected format is HH:MM:SS .

Action: Check the time format.

Error code: 3005

Cause: The timestamp timestampString > is in an incorrect format. Expected format is YYYY-MM-DD HH:MM:SS.NNNNNNNNN .

Action: Check the timestamp format.

Error code: 3006

Cause: The String object must be of even length to be converted to a ByteArray. This object could not be converted to a ByteArray

Action: Check the object being converted.

Error code: 3007

Cause: The object object > of class objectClass > could not be converted to javaClass >. The class javaClass > is not on the CLASSPATH.

Action: Check that the class javaClass > is on the CLASSPATH.

Database Exceptions (4001 — 4018)

Error code: 4002

Cause: An SQL exception was encountered, thrown by the underlying JDBC bridge. TopLink only wraps that exception.

Action: One must inspect the internal exception thrown.

Error code: 4003

Cause: The driver class name was not found.

Action: Check the class name given in JDBCLogin.

Error code: 4005

Cause: Session is not connected to the database while doing reading or writing on the database.

Action: An application may have to login again because the connection to the database might have been lost.

Error code: 4006

Cause: Error reading blob data from the database. There are two possibilities for this exception, first is that the blob data was not read properly from the result set or the TopLink could not process the blob data using ByteArrayOutputStream .

Action: Check if the underlying driver support blobs properly or not and if it does then report this problem to Technical Support.

Error code: 4007

Cause: Could not convert object type on internal error. java.sql.TYPES = . The object from the result set cannot be converted to the type returned from the metadata information.

Action: Check if the underlying driver support the conversion type properly or not and if it does then report this problem to Technical Support.

Error code: 4008

Cause: An attempt has been made to logout while the transaction is still in progress. You cannot logout while a transaction is in progress.

Action: Wait until the transaction is over.

Error code: 4009

Cause: The sequence information given to TopLink is not sufficiently complete to get the set of sequence numbers from the database. This usually happens on native sequencing on oracle database.

Action: Check the data given specially the sequence name given in TopLink.

Error code: 4011

Cause: Error preallocating sequence numbers on the database; the sequence table information is not complete.

Action: Check if the sequence table was created on the database properly or not.

Error code: 4014

Cause: Cannot register Synchronization Listener: underlying_exception_string . When the TopLink Session is configured with an ExternalTransactionController , any unit of work requested by a client must operate within the context of a JTS external global transaction. When a unit of work is created and the external global transaction is not in existence or if the system cannot acquire a reference to it, this error is reported.

Action: Ensure that a JTS transaction is in progress before acquiring the unit of work.

Error code: 4015

Cause: Synchronized UnitOfWork does not support the commitAndResume operation. When the TopLink Session is configured with an ExternalTransactionController , any unit of work requested by a client must operate within the context of a JTS external global transaction (see Error code: 4014). The JTS specification does not support the concept of «checkpointing» a transaction, that is, committing the work done and then continuing to work within the same transaction context (JTS does not support nested transactions, either). Thus, if client code invokes commitAndResume() on a «synchronized» unit of work, this error will be reported.

Error code: 4016

Cause: Configuration error. Attempting to instantiate Driver: . Could not instantiate driver.

Action: Check the driver.

Error code: 4017

Cause: A configuration error occurred while attempting to instantiate Driver: . Could not instantiate driver.

Action: Check the driver.

Error code: 4018

Cause: The transaction manager has not been set for the JTSSynchronizationListener .

Action: Set a transaction manager for the JTSSynchronizationListener .

Optimistic Lock Exceptions (5001 — 5007)

Error code: 5001

Cause: An attempt was made to delete the object object > but it has no version number in the identity map. This object either was never read or has already been deleted.

Action: Logging SQL is very helpful in understanding the reason why the exception is thrown. The last delete will show the object we are deleting that throws an exception.

Error code: 5003

Cause: The object state has changed in the database. The object object > cannot be deleted because it has changed or been deleted since it was last read. This usually means that the row in the table was changed by some other application.

Action: Refreshing an object will refresh the object with the new data from the database.

Error code: 5004

Cause: An attempt has been made to update the object object > but it has no version number in the identity map. It may not have been read before being updated or has been deleted.

Action: Logging SQL is very helpful in understanding the reason why the exception is thrown. The last update will show the object we are updating that throws an exception.

Error code: 5006

Cause: The object state has changed in the database. The object object > cannot be updated because it has changed or been deleted since it was last read. This usually means that the row in the table was changed by some other application.

Action: Refreshing an object will refresh the object with the new data from the database.

Error code: 5007

Cause: The object aClass > must have a non-read-only mapping corresponding to the version lock field. The mapping was not defined for the locking field. It is needed when the lock value is stored in the domain object than in a cache.

Action: Define a mapping for the field.

Error code: 5008

Cause: A write lock value which is stored in a domain object is not an instance of java.sql.Timestamp .

Action: Change the value of the attribute to be an instance of java.sql.Timestamp .

Query Exceptions (6001 — 6092)

Error code: 6001

Cause: Cursored SQL queries must provide an additional query to retrieve the size of the result set. Custom queries using cursor streams and not specifying the size query will cause this exception. The size query is used to retrieve the size of the number of object read from the database. This is done on JDBC 1.0 compatible drivers because it provides no way to extract the size of the result set read. Non custom queries using cursor streams will have default queries generated by TopLink.

Action: Specify a size query.

Error code: 6002

Cause: Aggregated objects cannot be written or deleted independent of their owners. There is no identity maintained on such objects.

Action: Application’s discretion.

Error code: 6003

Cause: The number of arguments provided to the query for execution does not match the number of arguments provided with the query definition.

Action: Check the query and query execution.

Error code: 6004

Cause: The object of class with identity hashcode (System.identityHashCode()) is not from this unit of work space but from the parent session. The object was never registered in this unit of work but read from the parent session and related to an object registered in the unit of work.

Action: Ensure that you are correctly registering your objects. If you are still having problems, you can use the UnitOfWork.validateObjectSpace() method to help debug where the error occurred. Please see the manual and FAQ for more information.

Error code: 6005

Cause: The object clone of class with identity hashcode (System.identityHashCode()) is the original to a registered new object. The unit of work clones registered new objects, so you must ensure that it is registered before it is reference by another object. If you do not want the new object to be cloned, used the U nitOfWork.registerNewObject(Object) API.

Action: Ensure that you are correctly registering your objects. If you are still having problems, you can use the UnitOfWork.validateObjectSpace() method to help debug where the error occurred. Please see the manual and FAQ for more information.

Error code: 6006

Cause: This mapping does not support batch reading. The optimization of batching the read of all the target rows is not supported for the mapping.

Action: The problem is a TopLink development problem and user should never encounter this unless the mapping is a new custom mapping. Contact Technical Support.

Error code: 6007

Cause: Missing descriptor for reference Class >. The descriptor related to the class or the object is not found in the session.

Action: Check if the related descriptor was added to the session or the query is done on the right object or class.

Error code: 6008

Cause: Missing descriptor for domain Class Name > for query named queryName >. The descriptor where named query is defined is not added to the session.

Action: Check if the related descriptor was added to the session or the query is done on the right class.

Error code: 6013

Cause: The size query given on the queries returning cursor streams is not correct. The execution of the size query did not return any size.

Action: If the cursor stream query was custom query than check the size query specified else report this problem to Technical Support.

Error code: 6014

Cause: Objects cannot be written in unit of work using modify queries, they must be registered.

Action: Objects are registered in the unit of work and during commit unit of work will do the required changes to the database.

Error code: 6015

Cause: The query key key > does not exist. Usually this happens because of mis-spelled query key.

Action: Check the query key specified in the expression and make sure that a query key was added to the descriptor.

Error code: 6016

Cause: Objects and the database cannot be changed through the server session; all changes must be done through a client session’s unit of work. The objects cannot be changed on the server session by modifying queries. Objects are changed in the client sessions acquired from this server session.

Action: Use client session’s unit of work to change the object.

Error code: 6020

Cause: No concrete class indicated for the type in this row. The type indicator read from the database row has no entry in the type indicator hashtable or if class extraction method was used, it did not return any concrete class type. The exception is thrown when sub classes are being read.

Action: Check class extraction method if specified or check the descriptor to see if all the type indicator values were specified or not.

Error code: 6021

Cause: No cursor support provided for abstract class multiple table descriptors using expressions.

Action: Consider using custom SQL or multiple queries. query >

Error code: 6023

Cause: There are no fields to be insert into the table. The fields to insert into the table, table > is empty. You must define at least one mapping for this table

Action: Must define at least one mapping for this table.

Error code: 6024

Cause: An object to modify is required for a modify query.

Action: Ensure the query contains an object before executing.

Error code: 6026

Cause: Query is not defined. When executing query on the session the parameter which takes query is null.

Action: Check if the query is passed properly.

Error code: 6027

Cause: The unit of work has been released and is now inactive.

Action: The unit of work, once released, cannot be reused unless commitAndResume is called.

Error code: 6028

Cause: An attempt has been made to read from the cursor streams beyond its limits (beyond the end of the stream).

Action: Ensure the stream is being checked for an «end of stream» condition before attempting to retrieve more objects.

Error code: 6029

Cause: The reference class in the query is not specified. A reference class must be provided.

Action: Check the query.

Error code: 6030

Cause: Refresh is not possible if caching is not set. The read queries which skip cache to read objects cannot be used to do refresh the object. Refreshing is not possible without identity.

Action: Check query.

Error code: 6031

Cause: Did not find size query. Size only supported on expression queries, unless a size query is given.

Action: Cursor streams on custom query should also define size query.

Error code: 6032

Cause: The SQL statement has not been properly set. The user should never encounter this unless queries have been customized.

Action: Contact Technical Support.

Error code: 6034

Cause: Invalid query item expression.

Action: Validate the Expression being used.

Error code: 6041

Cause: The selection object passed to a read object or refresh was null.

Action: Check setSelectionObject() on the read query.

Error code: 6042

Cause: Data read and data modify queries is being executed without the session name. Only object-level queries can be directly executed by the session broker, unless the query is named.

Action: Session broker has no idea about such queries about which session to execute the query on. Specify the session name.

Error code: 6043

Cause: ReportQuery without PKs cannot readObject. The report query result returned is without primary key values. An object from the result can only be created only if primary keys were also read.

Action: Check documentation on retrievePriamryKeys() on report query.

Error code: 6044

Cause: The primary key read from the row, databaseRow > during the execution of the query was detected to be null; primary keys must not contain null.

Action: Check query and also the table on the database.

Error code: 6045

Cause: The subclass has no descriptor defined for it.

Action: Check session if the descriptor was added or not or else check class extraction method.

Error code: 6046

Cause: Cannot delete an object of read-only class. The class className > is declared read-only in this unit of work. Thrown in unit of work when trying to delete an object that is marked as read only.

Action: Contact Technical Support.

Error code: 6047

Cause: The operator data > used in the expression is not valid.

Action: Check ExpressionOperator class to see a list of all of the operators supported.

Error code: 6048

Cause: Illegal use of getField data > in expression. This is a TopLink development exception that users should not encounter.

Action: Report this problem to Technical Support.

Error code: 6049

Cause: Illegal use of getTable data > in expression. This is a TopLink development exception that users should not encounter.

Action: Report this problem to Technical Support.

Error code: 6050

Cause: The number of attributes requested does not match the attributes returned from the database in report query. This usually happens if one gives custom query on the report query.

Action: Check the custom query if it is specified or report this problem to Technical Support.

Error code: 6051

Cause: Partial Objects are never put in the cache. Partial object queries are not allowed to maintain the cache or be edited. You must set dontMaintainCache() .

Action: Call the dontMaintainCache() method before executing the query.

Error code: 6052

Cause: An outer join ( getAllowingNull ) is only valid for one to one mappings, and cannot be used for the mapping.

Action: Do not attempt to use getAllowingNull for mappings other than one to one.

Error code: 6054

Cause: Cannot add anObject > to a containerClass > using policy >. This is TopLink development exception and user should never encounter this problem unless a custom container policy has been written.

Action: Contact Technical Support.

Error code: 6055

Cause: The method invocation of aMethod > on the object anObject > threw a Java reflection exception while accessing method.

Action: Check Java documentation on the internal exception.

Error code: 6056

Cause: Cannot create a clone of anObject > using policy >. This is a TopLink development exception and user should never encounter this problem unless a custom container policy has been written.

Action: Report this problem to Technical Support.

Error code: 6057

Cause: The method methodName > is not valid to call on object aReceiver >. This is a TopLink development exception and user should never encounter this problem unless a custom container policy has been written.

Action: Contact Technical Support.

Error code: 6058

Action: Define clone method on the container class.

Error code: 6059

Cause: The class aClass > cannot be used as the container for the results of a query since it cannot be instantiated. Thrown when new interface container policy is being created using Java reflection.

Action: Check Java documentation on the internal exception.

Error code: 6060

Cause: Could not use object anObject > of type objectClass > as a key into aContainer > which is of type containerClass >. Key cannot be compared with the keys currently in the map. Throws Java reflection exception while accessing method.

Action: Check Java documentation on the internal exception.

Error code: 6061

Cause: Cannot reflectively access the method aMethod > for object: anObject > of type anObjectClass >. Throws Java reflection exception while accessing method.

Action: Check Java documentation on the internal exception.

Error code: 6062

Cause: The method aMethod > was called reflectively on object of class objectClass > and threw an exception. Throws Java reflection exception while accessing method.

Action: Check Java documentation on the internal exception.

Error code: 6063

Cause: Invalid operation operation > on cursor. The operation is not supported.

Action: Check the class documentation and look for the corresponding method that should be used.

Error code: 6064

Cause: Cannot remove anObject > of type anObjectClass > from aContainerClass > using policy >. This is TopLink development exception and user should never encounter this problem unless a custom container policy has been written.

Action: Contact Technical Support.

Error code: 6065

Cause: Cannot add element to the collection container policy (cannot add anObject > of type anObjectClass > to a aContainerClass >).

Action: Check Java documentation on the internal exception.

Error code: 6066

Cause: Deleted objects cannot have reference after being deleted. The object clone of class clone.getClass() > with identity hashcode (System.identityHashCode()) System.identityHashCode(clone) > has been deleted, but still has references.

Action: Ensure that you are correctly registering your objects. If you are still having problems, you can use the UnitOfWork.validateObjectSpace() method to help debug where the error occurred. Please see the manual and FAQ for more information.

Error code: 6068

Cause: Cannot compare table reference to data > in expression

Action: Check the expression

Error code: 6069

Cause: Field has invalid table in this context for field data > in expression.

Action: Check the expression

Error code: 6070

Cause: Invalid use of a query key representing a to-many relationship data > in expression. Use anyOf rather than get .

Action: Use the anyOf operator instead of get .

Error code: 6071

Cause: Invalid use of anyOf for a query key not representing a to-many relationship data > in expression. Use get rather than anyOf .

Action: Use the get operator instead of anyOf .

Error code: 6072

Cause: Querying across a variable one-to-one mapping is not supported.

Action: Change the expression such that the query in not done across a variable one to one mapping.

Error code: 6073

Cause: Ill-formed expression in query, attempting to print an object reference into a SQL statement for .

Action: Contact Technical Support.

Error code: 6074

Cause: This expression cannot determine if the object conforms in memory, you must set the query to check the database.

Action: Change the query such that it does not attempt to conform to the results of the query.

Error code: 6075

Cause: Object comparisons can only use the equal or notEqual operators, other comparisons must be done through query keys or direct attribute level comparisons.

Action: Ensure the query uses only equal and notEqual if object comparisons are being used.

Error code: 6076

Cause: Object comparisons can only be used with 1:1 mappings; other mapping comparisons must be done through query keys or direct attribute level comparisons.

Action: Use a query key instead of attempting to compare objects across the mapping.

Error code: 6077

Cause: Object comparisons cannot be used in parameter queries.

Action: Change the query such that it does not attempt to use object when using parameterized queries.

Error code: 6078

Cause: The class of the argument for the object comparison is incorrect.

Action: Ensure the class for the query is correct.

Error code: 6079

Cause: Object comparison cannot be used for target foreign key relationships. Query on the source primary key instead.

Action: Query on source primary key.

Error code: 6080

Cause: Invalid database call — the call must be an instance of DatabaseCall: .

Action: Ensure the call being used is a DatabaseCall.

Error code: 6081

Cause: Invalid database accessor — the accessor must be an instance of DatabaseAccessor: .

Action: Ensure the accessor being used is a DatabaseAccessor.

Error code: 6082

Action: Ensure the method being used is a supported method.

Error code: 6083

Cause: Queries using IN cannot be parameterized.

Action: Either disable the query prepare or binding.

Error code: 6084

Cause: The redirection query was not configured properly, the class or method name was not set.

Action: Check the configuration for the redirection class.

Error code: 6085

Cause: The redirection query’s method is not defined or define with the wrong arguments. It must be public static and have arguments DatabaseQuery, DatabaseRow, Session (the interface).

Action: Check the redirection query’s method as above.

Error code: 6086

Cause: The redirection query’s method invocation threw an exception.

Action: Check the redirection method for problems.

Error code: 6087

Cause: There is a class mismatch between the example object and the reference class specified for this query.

Action: Ensure the example and reference classes are compatible.

Error code: 6088

Cause: A RepertQuery has been built with no attributes specified.

Action: Specify attribute for the query.

Error code: 6089

Cause: The expression has not been initialized correctly. Only a single ExpressionBuilder should be used for a query. For parallel expressions, the query class must be provided to the ExpressionBuilder constructor, and the query’s ExpressionBuilder must always be on the left side of the expression.

Action: Contact Technical Support.

Error code: 6090

Cause: Cannot set ReportQuery to Check Cache Only .

Action: Contact Technical Support.

Error code: 6091

TYPE_MISMATCH_BETWEEN_ATTRIBUTE_AND_ CONSTANT_ ON_EXPRESSION

Cause: The type of the constant, used for comparison in the expression, does not match the type of the attribute.

Action: Contact Technical Support.

Error code: 6092

Cause: Uninstantiated ValueHolder detected. You must instantiate the relevant Valueholders to perform this in-memory query.

Action: Instantiate the valueholders for the collection you want to query on.

Validation Exceptions (7001 — 7097)

Error code: 7001

Cause: You attempted to allocate client sessions before logging into the server.

Action: Ensure you have called login() on your ServerSession or DatabaseSession .

This error also appears in multithreaded environments as a result of concurrency issues. Check that all of your threads are synchronized.

Error code: 7002

Cause: The pool name used while acquiring client session from the server session does not exist.

Action: Check the pool name given while acquiring client session and all the existing pools on the server session.

Error code: 7003

Cause: The maximum number of connections in a connection pool should be more than the minimum number of connections.

Action: Check addConnectionPool(String poolName, JDBCLogin login, int minNumberOfConnections, int maxNumberOfConnections) on server session.

Error code: 7004

Cause: Pools must all be added before login on the server session has been done. Once logged in pools cannot be added.

Action: Check addConnectionPool(String poolName, JDBCLogin login, int minNumberOfConnections, int maxNumberOfConnections) on server session. This method should be called before login on server session.

Error code: 7008

Cause: The Java type javaClass > is not a valid database type. The Java type of the field to be written to the database has no corresponding type on the database.

Action: Check table or stored procedure definition.

Error code: 7009

Cause: The descriptor className >is not found in the session. Verify that the descriptor has been properly registered with the session.

Action: Check if the related descriptor to the class was added to the session.

Error code: 7010

Cause: This is a TopLink development exception and user should never encounter this problem. It happens when a copy of vector is created with start and end index.

Action: Report this problem to Technical Support.

Error code: 7011

Cause: This is a TopLink development exception and user should never encounter this problem. It happens when a copy of vector is created with start and end index.

Action: Report this problem to Technical Support.

Error code: 7012

Cause: This is a TopLink development exception and user should never encounter this problem. It happens when test cases are executed.

Action: Report this problem to Technical Support. This error commonly occurs if you attempt to commit() an invalid (or previously committed) UnitOfWork.

If ValidationException.cannotCommitUOWAgain() appears in the stack trace, ensure that call commit() on valid UnitOfWork instances.

Error code: 7013

Cause: TopLink.properties file cannot be found on the system CLASSPATH.

Action: Ensure that there is a TopLink.properties file located on the system CLASSPATH.

Error code: 7017

Cause: Child descriptors do not have an identity map; they share their parent’s. An Identity map is added to the child descriptor. A child descriptor shares its parent’s identity map.

Action: Check child descriptor and remove identity map from it.

Error code: 7018

Cause: The user should never encounter this problem. It happens when test cases are executed.

Action: Contact Technical Support.

Error code: 7023

Cause: The login instance provided to the login() method is incorrect. A JDBCLogin must be provided.

Action: It should be of type JDBCLogin.

Error code: 7024

Cause: This is a TopLink development exception and users should never encounter it.

Action: Contact Technical Support.

Error code: 7025

Cause: The key on the database row is not either of type String or of type DatabaseField.

Action: Contact Technical Support.

Error code: 7027

Cause: Sequence sequenceName > is setup incorrectly, increment does not match pre-allocation size.

Action: Contact Technical Support.

Error code: 7028

Action: The objects in the unit of work are written to database by registering and committing the unit of work.

Error code: 7030

Cause: You cannot set read pool size after the server session has already been logged in.

Action: The size should be set before login.

Error code: 7031

Cause: You cannot add descriptors to session broker.

Action: Descriptors are added to the sessions contained in the session broker.

Error code: 7032

Cause: The descriptor related to the domain class domainClass > was not found in any of the sessions registered in the session broker.

Action: Check sessions.

Error code: 7033

Cause: The session with the given name sessionName > is not registered in the session broker.

Action: Check session broker.

Error code: 7038

Cause: Error while logging message to session’s log.

Action: Check the internal exception.

Error code: 7039

Cause: Cannot remove from the set of read-only classes in a nested unit of work. A nested unit of work’s set of read-only classes must be equal to or a superset of its parent’s set of read-only classes.

Action: Contact Technical Support.

Error code: 7040

Cause: Cannot change the set of read-only classes in a unit of work after that unit of work has been used. Changes to the read-only set must be made when acquiring the unit of work or immediately after.

Action: Contact Technical Support.

Error code: 7042

Cause: The platform class className > was not found and a reflection exception was thrown.

Action: Check internal exception.

Error code: 7043

does not have any tables to create on the database.

Action: Validate the project and tables to be created.

Error code: 7044

Cause: The container class specified className > cannot be used as the container because it does not implement Collection or Map.

Action: The container class must implement either of these two interfaces.

Error code: 7047

Cause: Invalid Map class was specified for the container policy. The container specified (of class aPolicyContainerClass >) does not require keys. You tried to use methodName >.

Action: Use map class that implements Map interface.

Error code: 7048

Cause: The key method on the map container policy is not defined. The instance method methodName > does not exist in the reference class className > and therefore cannot be used to create a key in a Map.

Error code: 7051

Action: Contact Technical Support.

Error code: 7052

Cause: The method useMapClass was called on a DirectCollectionMapping . It is illegal to call useMapClass() on a DirectCollectionMapping . TopLink cannot instantiate Java attributes mapped using a DirectCollectionMapping with a Map. The useMapClass() API is supported for OneToManyMappings and ManyToManyMappings . The Java2 Collection interface is supported using the useCollectionClass() method.

Action: Do not call useMapClass() on DirectCollectionMappings . Instead, use the useCollectionClass() API.

Error code: 7053

Cause: Release attempted on a session that is not a client session. Only client sessions may be released.

Action: Modify code so that the client session is not released.

Error code: 7054

Cause: Acquire attempted on a session that is not a client session. Client sessions may only be acquired from server sessions.

Action: Modify code so that the acquire in not attempted.

Error code: 7055

Cause: Optimistic Locking is not supported with stored procedure generation.

Action: Do not use OptimisticLocking with stored procedure generation.

Error code: 7056

Cause: The wrong object was registered into the unit of work. It should be the object from the parent cache.

Action: Ensure the object is from the parent cache

Error code: 7058

Cause: The connector must be of type DefaultConnector.

Action: Ensure the connector is of type DefaultConnector.

Error code: 7059

Cause: Invalid DataSource name: .

Action: Verify the data source name.

Error code: 7060

Cause: Cannot acquire DataSource: or an error has occurred in setting up the datasource.

Action: Verify the data source name. Check the nested SQL exception to determine the cause of the error. Typical problems include:

The connection pool was not configured in your config.xml.

The driver is not on the classpath.

The user or password is incorrect.

The database server url or driver name is not properly specified.

Error code: 7061

Cause: Exception occurred within JTS.

Action: Examine the JTS exception returned and consult the JTS documentation.

Error code: 7062

Cause: FieldLevelLocking not supported outside a unitOfWork. In order to use field level locking, a unit of work must be used for ALL writes.

Action: Use a unit of work for writing.

Error code: 7063

Cause: Exception occurred within EJB container.

Action: Examine the EJB exception returned and consult the JTS documentation.

Error code: 7064

Cause: Exception occurred in reflective EJB bean primary key extraction.

Action: Ensure your primary key object is defined correctly.

Error code: 7065

Cause: The remote class for the bean cannot be loaded/found for the bean.

Action: Ensure the correct class loader is set correctly.

Error code: 7066

Cause: Cannot create or remove beans unless a JTS transaction is present, bean= .

Action: Verify that the JTS transaction is present.

Error code: 7068

Cause: The platform class

was not found for the

using default class loader.

Action: Validate the project and platform.

Error code: 7069

Cause: A exception occurred looking up or invoking the session amendment method, on the class .

Action: Validate the amendment method and class.

Error code: 7070

Cause: A toplink.properties resource bundle must be located on the classpath in a TopLink directory.

Action: Validate the classpath and the location of the TopLink resource bundle.

Error code: 7071

Cause: You cannot use input output parameters without using binding.

Action: Use binding on the StoredProcedureCall .

Error code: 7073

Cause: Oracle object type with type name is not defined.

Action: Verify that the Oracle object type is defined.

Error code: 7074

Cause: Oracle object type is not defined.

Action: Verify that the Oracle object type is defined.

Error code: 7075

Cause: Oracle VARRAY type maximum size is not defined

Action: Verify the maximum size for the Oracle VARRAY.

Error code: 7076

Cause: When generating the project class the descriptors must not be initialized.

Action: Ensure the descriptors are not initialized before generating the project class.

Error code: 7077

Cause: The Home Interface homeClassName.toString() > specified during creation of BMPWrapperPolicy does not contain a correct findByPrimaryKey method. A findByPrimaryKey method must exist that takes the PrimaryKey class for this bean.

Action: Verify that a FindByPrimaryKey method exists and is correct.

Error code: 7078

Cause: The sessionName specified on the deployment descriptor does not match any session specified in the TopLink properties file.

Action: Contact Technical Support.

Error code: 7079

Cause: The descriptor was not found in the session.

Action: Check the project being used for this session.

Error code: 7080

Cause: A FinderException was thrown when trying to load an object from the class with the primary key.

Action: Contact Technical Support.

Error code: 7081

CANNOT_REGISTER_AGGREGATE_OBJECT_IN_ UNIT_OF_ WORK

Cause: The aggregate object cannot be directly registered in the unit of work. It must be associated with the source (owner) object.

Action: Contact Technical Support.

Error code: 7082

Cause: The TopLink properties file specified multiple project files for the server. Only one project file can be specified.

Action: Specify one of projectClass , projectFile , or xmlProjectFile .

Error code: 7083

Cause: The TopLink properties file does not include any information on the TopLink project to use for the server. One project file must be specified.

Action: Specify one of projectClass , projectFile , or xmlProjectFile .

Error code: 7084

Cause: The specified file is not a valid type for reading. ProjectReader must be given the deployed XML Project file.

Action: Contact Technical Support.

Error code: 7085

Cause: Cannot create an instance of the external transaction controller specified in the properties file.

Action: Contact Technical Support.

Error code 7087:

Cause: SessionManager cannot load the class corresponding to session’s type class name.

Action: Verify the class name of the session’s type in the Session.xml or toplink.properties that it is fully qualified.

Error code 7088:

Cause: SessionManager cannot load the class corresponding to external transaction controller’s class name.

Action: Verify the class name of the external transaction controller in Session.xml or toplink.properties that it is valid and fully qualified.

Error code 7089:

Cause: SessionManager cannot load the class corresponding to the amendment class name or it cannot load the method on the amendment class corresponding to the amendment method name.

Action: Verify the class name of the amendment class in Session.xml or toplink.properties that it is fully qualified and the amendment method exists in the amendment class.

Error code 7091

Cause: Cannot create the listener class that implements SessionEventListener for the internal use of SessionXMLProject .

Action: Contact Technical Support.

Error code 7092

Cause: Add custom query with the same name and arguments to a session.

Action: Verify that no query is added to the session more than once or change the query name so that the query can be distinguished.

Error code 7093

Cause: Cannot create an instance of the query argument type.

Action: Verify the argument type is a fully qualified class name and the argument class is included in the classpath environment.

Error code 7095

Cause: Session.XML or toplink.properties cannot be loaded.

Action: Add the path to the above file to the classpath environment.

Error code 7096

Cause: Invoke commit() on an inactive unit of work that was committed or released.

Action: Invoke commit() on a new unit of work or invoke commitAndResume() so that the unit of work can be reused. See Oracle9iAS TopLink Foundation Library Guide for more details on commitAndResume() .

Error code 7097:

Cause: Invoke a nonsupport operation on an object.

Action: Do not use the operation indicated in the stack trace.

Error Code: 7099

Cause: The filename specified for the XML-based project is incorrect.

Action: Verify the name and location of the file.

Error Code: 7101

Cause: The toplink-ejb-jar.xml file was not found.

Action: Please refer to the TopLink examples located in Examples .

EJBQL Exceptions (8001 — 8009)

Error Code: 8001

Cause: The TopLink EJBQL parser doesn’t recognize a clause in the EJBQL string

Action: Validate the EJBQL string

Error Code: 8002

Cause: TopLink has encountered a problem while parsing the EJBQL string.

Action: Check the internal exception for details on the root cause of this exception

Error Code: 8003

Cause: The class specified in the EJBQL string was not found

Action: Ensure that the class is on the appropriate classpath

Error Code: 8004

Cause: TopLink was unable to resolve the alias used in the EJBQL string

Action: Validate the identifiers used in the EJBQL string

Error Code: 8005

Cause: TopLink was unable to resolve the class for an alias. This means that the class specified can not be found

Action: Ensure the class is specified properly and is on the classpath

Error Code: 8006

Cause: The class specified in the query has no TopLink descriptor

Action: Ensure the class has been mapped and is specified correctly in the EJBQL string

Error Code: 8009

Cause: An unsupported expression was used in the EJBQL

Action: Change the query to use only supported expressions

Synchronization Exceptions (8050 — 8070)

Error Code: 8050

Cause: A communication error over the communication framework

Action: Reconnect the server to this session. If using the default discovery system restart the session on the disconnected server

Error Code: 8051

Cause: The remote server’s cache has become corrupt.

Action: Restart the session on the remote server or initialize identity maps

Error Code: 8052

Cause: The local shared cache has become corrupt.

Action: Restart the session on this server or initialize identity maps.

Error Code: 8053

Cause: Failed to get the IP address of the local machine for generating the SessionID .

Action: Contact network administrator.

Error Code: 8054

Cause: A Global Naming Service, such as JNDI, was unavailable at supplied URL.

Action: Check that the LocalHostURL points to the Service and verify that the Service is available.

Error Code: 8055

Cause: Failed to find the remote connection for a remote session.

Action: Verify that the Global Naming Service, such as JNDI, is running properly.

Error Code: 8056

Cause: Message from remote system could not be read by this session.

Action: None, however some servers may not be connected.

Error Code: 8057

Cause: Failed to create the specified Synchronization Service.

Action: Verify that you have specified an available Synchronization service in the current configuration file, or in your application code.

Error Code: 8058

Cause: Failed to send existence announcement to remote servers.

Action: Check that this machine has access to the network and restart Synchronization service.

Error Code: 8059

Cause: Failed to set socket to listen to the multicast group.

Action: Contact network administrator to verify that this machine has network access and can use Multicast protocols.

Error Code: 8070

Cause: Error occurred while attempting to receive a Multicast announcement.

Action: Verify that this machine is connected to the network and is capable of sending and receiving multicast packets.

Источник

java error code 112

Ошибки загрузки: MSI поврежден, файл java_sp.dll поврежден, 1305, 2755, 1606, 25025, 1618

Этот раздел касается:

Во время установки Java с сайта Java.com отображается диалоговое окно с одним из следующих кодов ошибки:

MSI поврежден, 25025, файл java_sp.dll поврежден, 1035, 1305, 1311, 1324, 1327, 1335, 1600, 1601, 1606, 1624, 1643, 1722, 1744, 1788, 2352, 2753, 2755 и 1618

Эти сообщения отображаются во время установки и указывают на то, что установка не завершена.

Ошибка: поврежденный MSI

Эта ошибка чаще возникает в системах Windows XP.
Пользователям Windows XP рекомендуется обновить Windows до пакета обновления 3 (SP3), чтобы можно было успешно загрузить и установить Java.

Эта ошибка возникает в том случае, когда на жестком диске нет такого количества свободного места, которое является достаточным для создания временных файлов в процессе установки программы.

С целью решения возникшей проблемы рекомендуется освободить дополнительное рабочее пространство на диске. При этом можно использовать приложение «Очистка диска» или удалить ненужные временные файлы вручную.

Для того чтобы временные файлы удалить вручную, следует выполнить следующие действия:

Во-первых, запустите программу «Проводник Windows».

Во-вторых, найдите папку WindowsTemp, на том логическим диске, на котором сейчас установлена операционная система.

В-третьих, в строке меню Проводника в разделе «Правка» выберите пункт «Выделить все».

Починим все.

«Ошибка программы установки 112: программе установки не удается извлечь и скопировать все файлы, необходимые для продолжения установки».

Эта ошибка возникает в том случае, когда на жестком диске нет такого количества свободного места, которое является достаточным для создания временных файлов в процессе установки программы.

С целью решения возникшей проблемы рекомендуется освободить дополнительное рабочее пространство на диске. При этом можно использовать приложение «Очистка диска» или удалить ненужные временные файлы вручную.

Для того чтобы временные файлы удалить вручную, следует выполнить следующие действия:

Во-первых, запустите программу «Проводник Windows».

Во-вторых, найдите папку WindowsTemp, на том логическим диске, на котором сейчас установлена операционная система.

В-третьих, в строке меню Проводника в разделе «Правка» выберите пункт «Выделить все».

В-четвертых, удалите все имеющиеся в папке файлы с помощью комбинации клавиш «Shift+Delete». Чтобы подтвердить удаление файлов нажмите кнопку «Да».

Источник

Проблемы

При установке программы локально или с узла Microsoft Windows Update может появиться следующее сообщение об ошибке:

Не удалось распаковать и скопировать все файлы программы, необходимые для продолжения установки. Обратитесь к поставщику программного обеспечения. ошибка 112

Причина

Это сообщение об ошибке появляется из-за повреждения файлов или недостаточно места в папке WindowsTemp.

Решение

Чтобы решить эту проблему, можно либо удалить содержимое папки WindowsTemp из командной строки или можно увеличить объем дискового пространства, доступного на диске, в которой находится папка Temp.

Способ 1

Чтобы удалить содержимое папки Temp из командной строки, выполните следующие действия.

Нажмите кнопку Пуск, выберите пункт Завершение работыи нажмите кнопку перезагрузить компьютер в режиме MS-DOS.

В командной строке введите cdи нажмите клавишу ВВОД.

Введите следующую команду

компакт-диск x: windirtempгде x имя диска, в котором Windows установлен и нажмите клавишу ВВОД.

Введите следующую команду

DEL *. *и нажмите клавишу ВВОД.

Введите команду exitи нажмите клавишу ВВОД, чтобы вернуться в Windows.

Способ 2

Дополнительные сведения о том, как свободное место на жестком диске щелкните следующий номер статьи базы знаний Майкрософт:

186099 описание очистки диска слишком

Статус

Такое поведение является особенностью данного продукта.

Дополнительная информация

Дополнительные сведения о том, как определить системную папку Windows щелкните следующий номер статьи базы знаний Майкрософт:

305792 как определить системную папку Windows

Источник

Как исправить ошибку Java 112?

Привет, ребята, добро пожаловать на мой канал HYR Tutorials. Сегодня мы собираемся обсудить интересную тему, когда мы начинаем солнечное затмение, иногда возникает эта ошибка. Для запуска Eclipse должна быть доступна JRE или JDK.

Это самая распространенная ошибка в Eclipse. Итак, если вы получаете эту ошибку, что вы, вероятно, сделаете? Загрузка нового Eclipse не является решением. Даже иногда, когда вы загружаете новый Eclipse, он не исправляет ошибку.

Поэтому, когда вы пытаетесь запустить Eclipse, Eclipse ищет файлы javaw.exe внутри себя. Если вы не указали путь, такой как путь к папке JRE или JDK, Eclipseclip выдаст эту ошибку независимо от того, что мы видели раньше, если вы не можете найти файл javaw.exe.

Итак, позвольте мне показать вам каждый метод, поэтому я сначала перейду к методу 1, то есть к H.

Добавьте папку bin JDK или JRE в переменные пути. У некоторых из вас могут возникнуть сомнения относительно простого добавления пути JDK. Нет, это не требуется, поскольку Eclipse ищет файл javaw.exe. Файл javaw.exe будет доступен в JRE и JDK.

Позвольте мне сказать вам, в чем может быть причина, если вы добавите путь JDK, вы, возможно, просто добавили папку JDK, которую вы не добавляли в папку bin. Поэтому, если вы просто добавляете JDK, он пытается просмотреть эти 12 элементов, чтобы javaw.exe не был найден.

Во втором методе мы не добавляем путь к папке bin или что-либо еще в переменные среды, а добавляем его непосредственно в Eclipse. Разница между методом 1 и методом 2 заключается в том, что если у вас несколько версий Eclipse, метод 1 будет работать со всеми версиями Eclipse, если у вас Eclipse One Eclipse Two, если вы установили путь к папке bin в переменных среды, запустите Eclipse 1 и 2 с ошибок нет, но во втором методе он ограничен только Eclipse. Мы не устанавливаем путь на системном уровне, мы меняем настройки конфигурации Eclipse, чтобы только этот Eclipse мог определять, где находится файл javaw.exe.

Поэтому, если вы откроете другой Eclipse, вы можете получить сообщение об ошибке, потому что в этом файле eclipse.ini нет этих местоположений файла javaw.exe.

Если вы используете несколько Eclipses, я настоятельно рекомендую вам использовать метод 1, тогда вы также можете выбрать метод 2, и некоторые из вас могут работать в некоторых компаниях, где у вас могут быть ограничения на редактирование переменных среды. В этом случае, конечно, вам нужно использовать метод 2. Теперь позвольте мне показать вам метод 2. Я просто изменю файл eclipse.ini. Все, что вам нужно сделать, это перед аргументами виртуальной машины нам нужно добавить bin местоположения файла javaw.exe. папку, я скопирую этот путь, а затем javaw. Отлично, правильно, теперь я нажимаю ‘Сохранить’.

Позвольте мне вернуться в Eclipse и попробовать снова запустить Eclipse, чтобы решить проблему. Таким образом, мы можем исправить это двумя способами в зависимости от ваших потребностей, вы можете выбрать метод и попытаться исправить, ребята, спасибо вам, ребята, за просмотр моей статьи

Как исправить ошибки Java?

Привет всем в этой статье, я рассказываю, как обновить Minecraft tlaucher 1.17 для большей ясности, посмотрите следующую статью Загрузить OpenJDK16 / Последняя ссылка в описании выберите файл openj9download jdk.zip для Windows 10 64bit дождитесь завершения после его завершения перейдите в Настройки, затем откройте браузер пути Java, откройте его в файле, который был загружен, прежде чем выбрать папку bin и выбрать javaw.exe, затем сохранить, теперь войдите в игру, получайте удовольствие, не забудьте подписаться на комментарий LIKE

Как исправить ошибку ‘Среда выполнения Java’ не найдена?

Почему в Windows 10 есть ошибка 112?

Ошибка 112 обычно появляется при попытке установить программу и выглядит следующим образом: «Ошибка 112 Ошибка установки при установке: программе установки не удается распаковать и скопировать все программные файлы, необходимые для продолжения установки». Эта проблема возникает, когда у вас недостаточно места на диске в папке временных файлов.

Сколько раз падал сервер Java?

Ошибка: сервер языковой поддержки для Java вылетал 5 раз за последние 3 минуты. Сервер не будет перезагружен. # 112 Ошибка: сервер языковой поддержки для Java вылетал 5 раз за последние 3 минуты. Сервер не будет перезагружен. # 112 Это расширение не может запуститься успешно, появляется это сообщение об ошибке.

Источник

Как исправить ошибку 112

Починим все.

«Ошибка программы установки 112: программе установки не удается извлечь и скопировать все файлы, необходимые для продолжения установки».

Эта ошибка возникает в том случае, когда на жестком диске нет такого количества свободного места, которое является достаточным для создания временных файлов в процессе установки программы.

С целью решения возникшей проблемы рекомендуется освободить дополнительное рабочее пространство на диске. При этом можно использовать приложение «Очистка диска» или удалить ненужные временные файлы вручную.

Для того чтобы временные файлы удалить вручную, следует выполнить следующие действия:

Во-первых, запустите программу «Проводник Windows».

Во-вторых, найдите папку WindowsTemp, на том логическим диске, на котором сейчас установлена операционная система.

В-третьих, в строке меню Проводника в разделе «Правка» выберите пункт «Выделить все».

В-четвертых, удалите все имеющиеся в папке файлы с помощью комбинации клавиш «Shift+Delete». Чтобы подтвердить удаление файлов нажмите кнопку «Да».

Эта ошибка возникает в том случае, когда на жестком диске нет такого количества свободного места, которое является достаточным для создания временных файлов в процессе установки программы.

С целью решения возникшей проблемы рекомендуется освободить дополнительное рабочее пространство на диске. При этом можно использовать приложение «Очистка диска» или удалить ненужные временные файлы вручную.

Для того чтобы временные файлы удалить вручную, следует выполнить следующие действия:

Во-первых, запустите программу «Проводник Windows».

Во-вторых, найдите папку WindowsTemp, на том логическим диске, на котором сейчас установлена операционная система.

В-третьих, в строке меню Проводника в разделе «Правка» выберите пункт «Выделить все».

Номер ошибки:	Ошибка 112
Название ошибки:	Spotify Error 112
Описание ошибки:	Ошибка 112: Возникла ошибка в приложении Spotify. Приложение будет закрыто. Приносим извинения за неудобства.
Разработчик:	Spotify AB
Программное обеспечение:	Spotify
Относится к:	Windows XP, Vista, 7, 8

Совместима с Windows 2000, XP, Vista, 7, 8 и 10

Признаки ошибки 112

Такие сообщения об ошибках 112 могут появляться в процессе установки программы, когда запущена программа, связанная с Spotify AB (например, Spotify), при запуске или завершении работы Windows, или даже при установке операционной системы Windows. Отслеживание момента появления ошибки 112 является важной информацией при устранении проблемы.

Причины ошибки 112

Ошибки типа Ошибки во время выполнения, такие как «Ошибка 112», могут быть вызваны целым рядом факторов, поэтому важно устранить каждую из возможных причин, чтобы предотвратить повторение ошибки в будущем.

Ошибки во время выполнения в базе знаний

Как исправить ошибку Spotify 112

Ниже описана последовательность действий по устранению ошибок, призванная решить проблемы Ошибка 112. Данная последовательность приведена в порядке от простого к сложному и от менее затратного по времени к более затратному, поэтому мы настоятельно рекомендуем следовать данной инструкции по порядку, чтобы избежать ненужных затрат времени и усилий.

Шаг 1: Восстановить записи реестра, связанные с ошибкой 112

Редактирование реестра Windows вручную с целью удаления содержащих ошибки ключей Ошибка 112 не рекомендуется, если вы не являетесь специалистом по обслуживанию ПК. Ошибки, допущенные при редактировании реестра, могут привести к неработоспособности вашего ПК и нанести непоправимый ущерб вашей операционной системе. На самом деле, даже одна запятая, поставленная не в том месте, может воспрепятствовать загрузке компьютера!

В связи с подобным риском мы настоятельно рекомендуем использовать надежные инструменты очистки реестра, такие как WinThruster [Загрузить] (разработанный Microsoft Gold Certified Partner), чтобы просканировать и исправить любые проблемы, связанные с Ошибка 112. Используя очистку реестра [Загрузить], вы сможете автоматизировать процесс поиска поврежденных записей реестра, ссылок на отсутствующие файлы (например, вызывающих ошибку %%error_name%%) и нерабочих ссылок внутри реестра. Перед каждым сканированием автоматически создается резервная копия, позволяющая отменить любые изменения одним кликом и защищающая вас от возможного повреждения компьютера. Самое приятное, что устранение ошибок реестра [Загрузить] может резко повысить скорость и производительность системы.

Предупреждение: Если вы не являетесь опытным пользователем ПК, мы НЕ рекомендуем редактирование реестра Windows вручную. Некорректное использование Редактора реестра может привести к серьезным проблемам и потребовать переустановки Windows. Мы не гарантируем, что неполадки, являющиеся результатом неправильного использования Редактора реестра, могут быть устранены. Вы пользуетесь Редактором реестра на свой страх и риск.

Перед тем, как вручную восстанавливать реестр Windows, необходимо создать резервную копию, экспортировав часть реестра, связанную с Ошибка 112 (например, Spotify):

Следующие шаги при ручном редактировании реестра не будут описаны в данной статье, так как с большой вероятностью могут привести к повреждению вашей системы. Если вы хотите получить больше информации о редактировании реестра вручную, пожалуйста, ознакомьтесь со ссылками ниже.

Мы не несем никакой ответственности за результаты действий, совершенных по инструкции, приведенной ниже — вы выполняете эти задачи на свой ​​страх и риск.

Шаг 2: Проведите полное сканирование вашего компьютера на вредоносное ПО

Есть вероятность, что ошибка 112 может быть связана с заражением вашего компьютера вредоносным ПО. Эти вредоносные злоумышленники могут повредить или даже удалить файлы, связанные с Ошибки во время выполнения. Кроме того, существует возможность, что ошибка 112 связана с компонентом самой вредоносной программы.

Совет: Если у вас еще не установлены средства для защиты от вредоносного ПО, мы настоятельно рекомендуем использовать Emsisoft Anti-Malware (скачать). В отличие от других защитных программ, данная программа предлагает гарантию удаления вредоносного ПО.

Шаг 3: Очистить систему от мусора (временных файлов и папок) с помощью очистки диска (cleanmgr)

Со временем ваш компьютер накапливает ненужные файлы в связи с обычным интернет-серфингом и повседневным использованием компьютера. Если такие ненужные файлы иногда не удалять, они могут привести к снижению быстродействия Spotify или к ошибке 112, возможно вследствие конфликтов файлов или перегрузки жесткого диска. Удаление таких временных файлов при помощи утилиты Очистка диска может не только устранить ошибку 112, но и существенно повысить быстродействие вашего компьютера.

Совет: Хотя утилита Очистки диска является прекрасным встроенным инструментом, она удаляет не все временные файлы с вашего компьютера. Другие часто используемые программы, такие как Microsoft Office, Firefox, Chrome, Live Messenger, а также сотни других программ не поддаются очистке при помощи программы Очистка диска (включая некоторые программы Spotify AB).

Из-за недостатков утилиты Windows Очистка диска (cleanmgr) мы настоятельно рекомендуем использовать специализированное программное обеспечение очистки жесткого диска / защиты конфиденциальности, например WinSweeper [Загрузить] (разработано Microsoft Gold Partner), для очистки всего компьютера. Запуск WinSweeper [Загрузить] раз в день (при помощи автоматического сканирования) гарантирует, что ваш компьютер всегда будет чист, будет работает быстро и без ошибок %%error_name%%, связанных с временными файлами.

Как запустить Очистку диска (cleanmgr) (Windows XP, Vista, 7, 8 и 10):

Шаг 4: Обновите драйверы устройств на вашем компьютере

Ошибки 112 могут быть связаны с повреждением или устареванием драйверов устройств. Драйверы с легкостью могут работать сегодня и перестать работать завтра по целому ряду причин. Хорошая новость состоит в том, что чаще всего вы можете обновить драйверы устройства, чтобы устранить проблему с Ошибка 112.

В связи с временными затратами и общей сложностью обновления драйверов мы настоятельно рекомендуем использовать утилиту обновления драйверов, например DriverDoc (разработана Microsoft Gold Partner), для автоматизации этого процесса.

Пожалуйста, учтите: Ваш файл Ошибка 112 может и не быть связан с проблемами в драйверах устройств, но всегда полезно убедиться, что на вашем компьютере установлены новейшие версии драйверов оборудования, чтобы максимизировать производительность вашего ПК.

Шаг 5: Используйте Восстановление системы Windows, чтобы «Отменить» последние изменения в системе

Восстановление системы Windows позволяет вашему компьютеру «отправиться в прошлое», чтобы исправить проблемы Ошибка 112. Восстановление системы может вернуть системные файлы и программы на вашем компьютере к тому времени, когда все работало нормально. Это потенциально может помочь вам избежать головной боли от устранения ошибок, связанных с 112.

Пожалуйста, учтите: использование восстановления системы не повлияет на ваши документы, изображения или другие данные.

Чтобы использовать Восстановление системы (Windows XP, Vista, 7, 8 и 10):

Шаг 6: Удалите и установите заново программу Spotify, связанную с Ошибка 112

Инструкции для Windows 7 и Windows Vista:

Инструкции для Windows XP:

Инструкции для Windows 8:

После того, как вы успешно удалили программу, связанную с Ошибка 112 (например, Spotify), заново установите данную программу, следуя инструкции Spotify AB.

Совет: Если вы абсолютно уверены, что ошибка 112 связана с определенной программой Spotify AB, удаление и повторная установка программы, связанной с Ошибка 112 с большой вероятностью решит вашу проблему.

Шаг 7: Запустите проверку системных файлов Windows («sfc /scannow»)

Проверка системных файлов представляет собой удобный инструмент, включаемый в состав Windows, который позволяет просканировать и восстановить поврежденные системные файлы Windows (включая те, которые имеют отношение к Ошибка 112).

Чтобы запустить проверку системных файлов (Windows XP, Vista, 7, 8 и 10):

Шаг 8: Установите все доступные обновления Windows

Microsoft постоянно обновляет и улучшает системные файлы Windows, связанные с Ошибка 112. Иногда для решения проблемы Ошибки во время выполнения нужно просто напросто обновить Windows при помощи последнего пакета обновлений или другого патча, которые Microsoft выпускает на постоянной основе.

Чтобы проверить наличие обновлений Windows (Windows XP, Vista, 7, 8 и 10):

Шаг 9: Произведите чистую установку Windows

Предупреждение: Мы должны подчеркнуть, что переустановка Windows займет очень много времени и является слишком сложной задачей, чтобы решить проблемы Ошибка 112. Во избежание потери данных вы должны быть уверены, что вы создали резервные копии всех важных документов, изображений, программ установки программного обеспечения и других персональных данных перед началом процесса. Если вы сейчас е создаете резервные копии данных, вам стоит немедленно заняться этим (скачать рекомендованное решение для резервного копирования), чтобы защитить себя от безвозвратной потери данных.

Пожалуйста, учтите: Если проблема 112 не устранена после чистой установки Windows, это означает, что проблема Ошибки во время выполнения ОБЯЗАТЕЛЬНО связана с аппаратным обеспечением. В таком случае, вам, вероятно, придется заменить соответствующее оборудование, вызывающее ошибку 112.

Информация об операционной системе

Сообщения об ошибках 112 могут появляться в любых из нижеперечисленных операционных систем Microsoft Windows:

Проблема с 112 все еще не устранена?

Обращайтесь к нам в любое время в социальных сетях для получения дополнительной помощи:

Об авторе: Джей Гитер (Jay Geater) является президентом и генеральным директором корпорации Solvusoft — глобальной компании, занимающейся программным обеспечением и уделяющей основное внимание новаторским сервисным программам. Он всю жизнь страстно увлекался компьютерами и любит все, связанное с компьютерами, программным обеспечением и новыми технологиями.

Источник

Не устанавливается Java на Windows

Работа некоторого программного обеспечения зависит от вспомогательных утилит и приложений. Поэтому пользователи желают быстрее решить проблему, когда не работает уже установленная Java. Ошибки могут возникнуть и раньше, когда не устанавливается приложение Java на компьютер с ОС Windows. Разберемся в каждой проблеме и узнаем, что делать.

Почему Java не скачивается

Чтобы ответить на вопрос, что делать, если модуль Джава не скачивается на компьютер, важно понять, почему установщик не выполняет функций по загрузке библиотек.

Загружаемый на компьютер файл не содержит требующихся компонентов, а просто скачивает необходимые файлы из виртуальных библиотек через интернет. Важно проверить работу файрволов, антивирусов и браузеров. Такое ПО блокирует фоновую загрузку Java.

Решение проблемы достигается двумя вариантами: настройка приложений или скачивание полноценного установщика с нашего и официального сайта Джава. Обновите антивирус, просмотрите параметры блокировок.

Ошибки при установке

Если файл скачался, а Java не устанавливается на Windows 7, 8, 10 или XP, то проблема глубже.

Способы решения проблемы:

С остальными ошибками Джава на Виндовс стоит познакомиться поближе.

Error Java Installer

Если не запускается установщик программы Java, обратите внимание на подключение к интернету. Лучше продолжить процесс в автономном режиме, скачав исполняемый файл с соответствующей пометкой.

Когда установленная Джава не открывается, то используется программа Windowsfix. ПО помогает в устранении сотен ошибок, включая те, что встречаются на Java.

Ошибка 1603

Ошибка Java с пометкой Error Code: 1603 появляется в процессе установки обновления. Причина до сих пор не выявлена разработчиками.

Предлагаются следующие способы решения:

После переустановки приложения верните флажок на место.

Ошибка 1618

Чтобы исправить ошибку Java 1618, воспользуйтесь следующей инструкцией:

Причина ошибки 1618 при установке Java на компьютер разработчиками не выяснена.

Unable to install Java

Java Destination Folder

Ошибка папки назначения Destination Folder возникает на 32-разрядных версиях ОС Windows. Для решения проблемы создается новая папка в следующей директории: «C:Program Files (x86)». Если есть какое-то содержание, то его нужно удалить.

Не запускается Java

Для начала убедитесь, что при установке не возникало неполадок и системных сообщений.

Как запустить программу Java, если возникают ошибки:

Приложение работает постоянно, но в фоновом режиме. Иными словами, вопрос, как открыть программу Java на компьютере, не имеет ответа. Главное – настроить взаимодействие с браузерами.

Источник

Home > Errors > Java error 112 – how do you decide

Java error 112 – how do you decide

The following steps may fix the error 112 issue:

Hi folks, welcome to my HYR Tutorials channel. Today we are going to discuss an interesting topic, that is when we start a solar eclipse, sometimes this error occurs. A JRE or JDK must be available to run Eclipse.

This is the most common bug in Eclipse. So if you are getting this error what are you likely to do? Downloading a new Eclipse that isn’t the solution. Even sometimes when you download a new Eclipse it doesn’t fix the error.

Today we’re going to see how we can fix these errors. Here is my eclipse and i will try to start my eclipse; so you can see the error stating that JDK or JRE is not available to start the eclipse. So what we need to do is we can fix this problem with two methods: Method 1 – add the JDK or JRE bin folder to the path variable and method 2 – add the location of javaw.exe in the eclipse.ini file added.

So when you try to start an Eclipse, Eclipse looks for javaw.exe files internally. If you didn’t set a path like the JRE or JDK folder path, Eclipseclip will throw up this error whatever we saw before if you can’t find the javaw.exe file.

So let me show you each method so I’m going to move on to method 1 first i.e. H.

Add the JDK or JRE bin folder to the path variables. Some of you may have doubts about just adding the JDK path No, it is not required as Eclipse is looking for the javaw.exe file javaw.exe file will be available under JRE and JDK.

Let me show you that I am allowed to open my Java installation directory so here is my Java installation directory I have both JDK and JRE so when I open JDK I have the bin folder here, I just open the bin folder and you can see the javaw.exe file here. So similarly let me show you the JRE so you can also see the javaw.exe in JRE so you can add JDK or JRE path ok but it should point to the bin location Some of you have the JDK -Path might already be added, but you still have this problem.

Let me tell you what could be the reason, if you add the JDK path, you maybe just added up the JDK folder that you didn’t add up to the bin folder. So if you just add up to the JDK it tries to look in these 12 items so that the javaw.exe is not found.

Do we need to add the bin folder to add the bin folder? my path environment variables I need to open my environment variables here right click on this pc go to properties -> go to advanced system settings -> click on environment variables so look for the path variable here, so here is my path variable just click edit and check if you already have a JDK here – or added JRE path, you can see here that I’ve already added a JDK path, but still I can properly address the problem I’m NOT pointing to the bin folder here I’m just pointing to the JDK folder, so let me edit this path and add the bin folder. Now you can see that there is no error and I am asked for the location of the workspace. So let’s try to fix this problem by adding the JDK bin folder path to the environment variables.

Now let’s see the second method. So now I’m going to remove my environment variable because I can’t reproduce the problem properly so I’m removing the environment variable, I leave it as it is before, it only points to JDKokay .. so I’m going to go to the eclipse so now you can see that I am able to generate error permissions, click OK.

The second method is to add the javaw.exe location in Eclipse.ini files.

activate outlook 2010

Where is this file located? So if you download an Eclipse after you’ve extracted the Eclipse file, you might see all of these folder rights. Right under the Eclipse executable is the Eclipse dot INI file so that Eclipselike will save the configuration settings where it should find the javaw.exe file, all you can mention the inconfiguration settings file.

In the second method, we don’t add the bin folder path or anything to the environment variables, but add it directly to the Eclipse. The difference between method 1 and method 2 is that if you have multiple Eclipse versions, method 1 will work with all Eclipse versions if you have Eclipse One Eclipse Two if you have set the bin folder path in the environment variables start Eclipse 1 and 2 with no errors, but in the second method it is limited to Eclipse only. We do not set the path at the system level, we change Eclipse configuration settings so that only this Eclipse can detect where the javaw.exe file is located.

So if you open the other Eclipse you might get an error because that eclipse.ini file doesn’t have these javaw.exe file locations.

If you are using multiple Eclipses, I strongly recommend that you use method 1 then you can also choose method 2 and some of you may work in some companies where you may have the limitations of editing the environment variables. In this case, of course, you need to use method 2. Now let me show you the method 2I will just change the eclipse.ini file all you need to do is before VM args we need to add the javaw.exe file location bin folder I will copy this path and then javaw. exe correct, so now i hit save.

outlook bcc limit

Let me go back to Eclipse and try starting Eclipse again so that will fix the problem. So we can fix it in two methods based on your needs you can choose the method and try to fix it guys, thank you guys for watching my article

How do I fix Java errors?

Download and Install Java

Hello everyone in this article, I am sharing How to update Minecraft tlaucher 1.17 updatedfor more clarity, watch the following article Download OpenJDK16 / Latest link in description select openj9download jdk.zip file for windows 10 64bit wait until finished after it finishes go to Settings, then open the Java path browser open it in the file that was downloaded before select the bin folder and select javaw.exe then save now get into the game have fun don’t forget to subscribe to the LIKE comment

How do I fix Java Runtime Environment not found?

Set JAVA_HOME variable for all users in Ubuntu by editing environment file.

Why is there an error 112 in Windows 10?

The 112 error normally appears when you’re trying to install a program, and shows up like this: “Error 112 Setup Installation Error: Setup is unable to decompress and copy all of the program files needed to proceed with the installation.” This issue above occurs when you do not have enough disk space available in the temporary files folder.

How many times has the Java server crashed?

Error: The Language Support for Java server crashed 5 times in the last 3 minutes. The server will not be restarted. #112 Error: The Language Support for Java server crashed 5 times in the last 3 minutes. The server will not be restarted. #112 This extension cannot start successfully and popup this error message.

Why is my Java plugin throwing an exception?

Log.txt It looks like the exception thrown while calling JavaLanguageServerPlugin.logInfo is caused by having a null context, which would be caused by the plugin being stopped at that point. So I doubt the exception causes the problem, but is rather a symptom of the server being stopped prematurely.

Why does javalanguageserverplugin.loginfo throw an exception?

It looks like the exception thrown while calling JavaLanguageServerPlugin.logInfo is caused by having a null context, which would be caused by the plugin being stopped at that point. So I doubt the exception causes the problem, but is rather a symptom of the server being stopped prematurely.

Other Questions In This Category

• ccc.exe memory leak

I have cloned the git Calendar project and tried to run on my samsung galaxy S3,
after launching the app on my phone, I tried to create a new event and got the below stack trace.

01-21 14:24:43.754: E/AndroidRuntime(8255): FATAL EXCEPTION: main
01-21 14:24:43.754: E/AndroidRuntime(8255): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.android.calendar.iselection/com.android.calendar.iselection.event.EditEventActivity}: android.view.InflateException: Binary XML file line #112: Error inflating class com.android.ex.chips.RecipientEditTextView
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2295)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2349)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.app.ActivityThread.access$700(ActivityThread.java:159)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1316)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.os.Handler.dispatchMessage(Handler.java:99)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.os.Looper.loop(Looper.java:176)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.app.ActivityThread.main(ActivityThread.java:5419)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at java.lang.reflect.Method.invokeNative(Native Method)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at java.lang.reflect.Method.invoke(Method.java:525)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:1046)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:862)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at dalvik.system.NativeStart.main(Native Method)
01-21 14:24:43.754: E/AndroidRuntime(8255): Caused by: android.view.InflateException: Binary XML file line #112: Error inflating class com.android.ex.chips.RecipientEditTextView
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.view.LayoutInflater.createView(LayoutInflater.java:626)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.view.LayoutInflater.createViewFromTag(LayoutInflater.java:702)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.view.LayoutInflater.rInflate(LayoutInflater.java:761)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.view.LayoutInflater.rInflate(LayoutInflater.java:769)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.view.LayoutInflater.parseInclude(LayoutInflater.java:855)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.view.LayoutInflater.rInflate(LayoutInflater.java:751)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.view.LayoutInflater.rInflate(LayoutInflater.java:769)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.view.LayoutInflater.rInflate(LayoutInflater.java:769)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.view.LayoutInflater.rInflate(LayoutInflater.java:769)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.view.LayoutInflater.inflate(LayoutInflater.java:498)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.view.LayoutInflater.inflate(LayoutInflater.java:398)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.view.LayoutInflater.inflate(LayoutInflater.java:354)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at com.android.calendar.iselection.event.EditEventFragment.onCreateView(EditEventFragment.java:567)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.app.Fragment.performCreateView(Fragment.java:1699)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.app.FragmentManagerImpl.moveToState(FragmentManager.java:903)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.app.FragmentManagerImpl.moveToState(FragmentManager.java:1075)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.app.BackStackRecord.run(BackStackRecord.java:682)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.app.FragmentManagerImpl.execPendingActions(FragmentManager.java:1455)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.app.Activity.performStart(Activity.java:5381)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2266)
01-21 14:24:43.754: E/AndroidRuntime(8255):     ... 11 more
01-21 14:24:43.754: E/AndroidRuntime(8255): Caused by: java.lang.reflect.InvocationTargetException
01-21 14:24:43.754: E/AndroidRuntime(8255):     at java.lang.reflect.Constructor.constructNative(Native Method)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at java.lang.reflect.Constructor.newInstance(Constructor.java:417)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.view.LayoutInflater.createView(LayoutInflater.java:600)
01-21 14:24:43.754: E/AndroidRuntime(8255):     ... 30 more
01-21 14:24:43.754: E/AndroidRuntime(8255): Caused by: android.content.res.Resources$NotFoundException: Resource ID #0x7f040000 type #0x3 is not valid
01-21 14:24:43.754: E/AndroidRuntime(8255):     at android.content.res.Resources.getDimension(Resources.java:1408)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at com.android.ex.chips.RecipientEditTextView.setChipDimensions(RecipientEditTextView.java:751)
01-21 14:24:43.754: E/AndroidRuntime(8255):     at com.android.ex.chips.RecipientEditTextView.<init>(RecipientEditTextView.java:259)
01-21 14:24:43.754: E/AndroidRuntime(8255):     ... 33 more

How do I resolve it?

This is my dimen.xml :

<resources>
<dimen name="chip_padding">8dip</dimen>
<dimen name="chip_height">32dip</dimen>
<dimen name="chip_text_size">14sp</dimen>
<dimen name="line_spacing_extra">4dip</dimen>
<integer name="chips_max_lines">-1</integer>

and this java class :

    private void setChipDimensions(Context context, AttributeSet attrs) {
    TypedArray a = context.obtainStyledAttributes(attrs, R.styleable.RecipientEditTextView, 0,
            0);
    Resources r = getContext().getResources();

    mChipBackground = a.getDrawable(R.styleable.RecipientEditTextView_chipBackground);
    if (mChipBackground == null) {
        mChipBackground = r.getDrawable(R.drawable.chip_background);
    }
    mChipBackgroundPressed = a
            .getDrawable(R.styleable.RecipientEditTextView_chipBackgroundPressed);
    if (mChipBackgroundPressed == null) {
        mChipBackgroundPressed = r.getDrawable(R.drawable.chip_background_selected);
    }
    mChipDelete = a.getDrawable(R.styleable.RecipientEditTextView_chipDelete);
    if (mChipDelete == null) {
        mChipDelete = r.getDrawable(R.drawable.chip_delete);
    }
    mChipPadding = a.getDimensionPixelSize(R.styleable.RecipientEditTextView_chipPadding, -1);
    if (mChipPadding == -1) {
        mChipPadding = (int) r.getDimension(R.dimen.chip_padding);
    }
    mAlternatesLayout = a.getResourceId(R.styleable.RecipientEditTextView_chipAlternatesLayout,
            -1);
    if (mAlternatesLayout == -1) {
        mAlternatesLayout = R.layout.chips_alternate_item;
    }

    mDefaultContactPhoto = BitmapFactory.decodeResource(r, R.drawable.ic_contact_picture);

    mMoreItem = (TextView) LayoutInflater.from(getContext()).inflate(R.layout.more_item, null);

    mChipHeight = a.getDimensionPixelSize(R.styleable.RecipientEditTextView_chipHeight, -1);
    if (mChipHeight == -1) {
        mChipHeight = r.getDimension(R.dimen.chip_height);
    }
    mChipFontSize = a.getDimensionPixelSize(R.styleable.RecipientEditTextView_chipFontSize, -1);
    if (mChipFontSize == -1) {
        mChipFontSize = r.getDimension(R.dimen.chip_text_size);
    }
    mInvalidChipBackground = a
            .getDrawable(R.styleable.RecipientEditTextView_invalidChipBackground);
    if (mInvalidChipBackground == null) {
        mInvalidChipBackground = r.getDrawable(R.drawable.chip_background_invalid);
    }
    mLineSpacingExtra =  r.getDimension(R.dimen.line_spacing_extra);
    mMaxLines = r.getInteger(R.integer.chips_max_lines);
    TypedValue tv = new TypedValue();
    if (context.getTheme().resolveAttribute(android.R.attr.actionBarSize, tv, true)) {
        mActionBarHeight = TypedValue.complexToDimensionPixelSize(tv.data, getResources()
                .getDisplayMetrics());
    }
    a.recycle();
}

I have laucnh app Calendar in debug mode :

       mChipPadding = a.getDimensionPixelSize(R.styleable.RecipientEditTextView_chipPadding, -1);
    if (mChipPadding == -1) {
        mChipPadding = (int) r.getDimension(R.dimen.chip_padding);
    }

the value of the R.dimen.chip_padding = 2130968576
is that correct? in the dimen.xml the chip_padding is define to 8dpi( dpi???)

I have tried replacing the 8dip by 8dp, but havin the same error,
in R.java of com.android.chips i have the reference of chip_padding :

public static final class dimen {
public static final int chip_height=0x7f040001;
public static final int chip_padding=0x7f040000;
public static final int chip_text_size=0x7f040002;
public static final int line_spacing_extra=0x7f040003;
}

so i do not really understand why it said the it did not found the ID….