No active partition при запуске как исправить

Are you one of those who get stuck in the “active partition not found” issue? Do you wonder how to fix this issue? If so, you can pay attention to this post. In this post, MiniTool Partition Wizard introduces several effective methods that may help you work this issue out.

What Is an Active Partition

An active partition is a partition on a hard drive that is set as the bootable partition, containing the startup files of the operating system. Without the active partition, you cannot boot your system successfully. There can be only one active partition in your Windows PC to boot the system.

If you have multiple hard disks on the PC, you can mark one partition as active on each disk. However, only the active partition on the first hard disk can be named the bootable partition and used to start up Windows.

Reasons for Active Partition Not Found

If there are any problems with the active partition, it’s possible for you to receive the error message that says “Active partition not found! Press any key” while booting the PC. This error can be caused by various reasons. Here, we summarize a couple of possible causes below.

• The Basic Input Output System (BIOS) settings are set improperly
• The system disk on your PC cannot be recognized
• Windows system files get corrupted or lost
• The partition that contains the boot files is inactive
• The Master Boot Record (MBR) disc is broken

Based on the above reasons for the “active partition not found” issue, some feasible troubleshooting fixes are listed in this post. If you are one of those who have no idea how to fix this issue, you can keep reading to solve your problem.

Methods for Fixing Active Partition Not Found

When you are facing the “active partition not found press any key” issue, it’s recommended that you follow the methods below to get rid of this issue.

Method 1: Make the BIOS Force Detect IDE

Once the active partition not found error comes out, the first thing you ought to do is to force detect the following IDEs. By doing so, you can make the BIOS recognize the boot drive in your Windows.

• Primary IDE Master
• Primary IDE Slave
• Secondary IDE Master
• Secondary IDE Slave

Step 1: Power on your computer.

Step 2: Press and hold the correct hotkey quickly until you get into the BIOS screen. To find out the particular hotkey for your PC, you should check your user manual in advance.

Step 3: Once you boot your computer into the BIOS, go to the Advanced tab. Then highlight IDE Configuration and press Enter to continue. 

Step 4: In the next window, find the above four IDEs and check if they are detected. If they are shown as None or Not Detected, you need to set None or Not Detected to Auto.

Step 5: After that, exit the BIOS and restart your computer to see if the error is resolved.

Method 2: Reset the BIOS to Default Settings

As mentioned earlier, the improper BIOS settings may lead to the active partition not found error. Therefore, you can also try to fix this issue by resetting the BIOS settings to default. To do this, you should enter the BIOS and go to the Exit tab. You may find the Load Setup Defaults option. Select it and then click Yes in the prompted window to confirm the operation.

Once you finish the operation, restart your computer to check if the “active partition not found press any key” issue is fixed.

Method 3: Repair the Corrupted System Files

The “active partition not found” issue may also happen if there are certain corrupted or missing system files in your Windows. In this case, you should take action to fix these system files via Startup Repair. To perform this operation, you need to enter Windows Recovery Environment (Windows RE) with Windows installation media or just follow the steps below.

Step 1: Turn off your computer and then turn it on. Once the Windows logo appears on your screen, press and hold the Power button to turn off the computer.

Step 2: Repeat the action of turning on and turning off your computer until a blue screen with Recovery appears.

Step 3: Click the Advanced options button, and then select the Troubleshoot option in the next window that shows Choose an option.

Step 4: Navigate to Advanced options > Startup Repair.

Step 5: Wait patiently until the process ends. Then restart your PC.

Method 4: Set the System Partition as Active

If the system partition that stores the boot files is inactive, you may receive the “active partition not found press any key” error message as well. On this occasion, you have to set the partition as active. Here’re two possible ways you can try to perform this operation.

Way 1: Use the Diskpart Utility

Diskpart is a Windows built-in utility that can help you manage your partitions and disks on your Windows. To set the system partition as active using this tool, you can follow the step-by-step guide below.

Step 1: Boot your computer into the Windows RE and then go to Troubleshoot > Advanced options > Command Prompt.

Step 2: After you enter the Command Prompt window, type the following commands one by one and press Enter after each.

• diskpart
• list disk
• select disk N (replace N with the disk where the system partition is located)
• list partition
• select partition * (* is the number of the system partition on your PC)
• active
• exit

Step 3: After that, restart your system to check if the error is removed.

[Fixed] System Reserved Partition Not Showing in Disk Management?

Way 2: Use MiniTool Partition Wizard

Although it’s convenient to set the partition as active with Diskpart, sometimes you may encounter an error while using this utility. Therefore, to avoid unexpected issues, we highly recommend you activate the partition via a piece of third-party software like MiniTool Partition Wizard.

How To Fix DiskPart Has Encountered An Error – Solved

MiniTool Partition Wizard is a professional partition manager that enables you to perform various operations. For instance, you can create/format/resize/delete partitions, set the partition as active/inactive, migrate OS to SSD/HDD, etc.

To begin with, you should create a bootable USB flash drive first to boot your computer. There is a detailed tutorial for activating the partition available.

Step 1: Download and install MiniTool Partition Wizard on the computer that can work properly.

Free Download

Step 2: Connect the prepared USB drive to the computer. Then launch this program to enter the main interface and click Bootable Media at the top-right corner.

Step 3: In the pop-up window, click WinPE-based media with MiniTool plug-in.

Step 4: After that, select USB Flash Disk and then click Yes to continue.

Step 6: After the process ends, click Finish and eject the USB drive from the computer.

Step 7: Boot the problematic computer from the bootable USB flash drive you have created. Wait a while and you will get into MiniTool Partition Wizard automatically.

Step 8: Right-click the target partition and select Set Active. Alternatively, you can also highlight the specific partition and then select Set Active from the left action panel.

Step 9: Finally, don’t forget to click Apply to save the changes.

Method 5: Repair MBR

MBR is a special type of boot sector at the very beginning of your boot drive that allows you to boot your computer successfully. If the MBR gets corrupted, you may fail to boot the system and be bothered by the “active partition not found” error. To solve this error, you’d better try repairing the MBR. This way requires you to enter the Windows RE as well.

Step 1: Go to Troubleshoot > Advanced options > Command Prompt in Windows RE.

Step 2: After getting into Command Prompt, type the following commands sequentially and press Enter after each one.

• bootrec.exe /fixmbr
• bootrec.exe /fixboot
• bootrec.exe /scanos
• bootrec.exe /rebuildbcd

Step 3: Once done, restart your computer. You might be able to boot your PC normally at this time.

I failed to boot up my computer and receive the “active partition not found” error on my screen. It troubled me a lot. Luckily, I found this post and solved my problem with the methods offered in this post. I’d like to share it with you.Click to Tweet

To Sum Up

This post explores why the “active partition not found” error happens and how to solve this error. When you are facing this error, you can keep an eye on this post to find a workable solution. If you have any problems with this error, you can leave them in the following comment part.

Are there any issues while using MiniTool Partition Wizard? Well, you can contact us for help via [email protected]. We will reply to you as soon as possible.

Ошибка «Активный раздел не найден» в Windows: как исправить

В этом руководстве мы покажем вам различные способы исправления ошибки «Активный раздел не найден» на вашем ПК с Windows. Многие пользователи сообщают, что у них появляется это сообщение об ошибке как на ПК с Windows 10, так и на ПК с 11. В результате чего они даже не могут загрузиться в ОС. Так в чем причина этой проблемы? ну их может быть довольно много.

К ним относятся текущий активный раздел, ставший неактивным, данные MBR были повреждены, BIOS не может идентифицировать активный раздел, настройки BIOS были неправильно настроены или системные файлы повреждены. К счастью, существует несколько отличных обходных путей, которые помогут вам решить эти проблемы, что, в свою очередь, исправит ошибку активного раздела. Итак, без лишних слов, давайте проверим их.

Как исправить ошибку «Активный раздел не найден» в Windows

Рекомендуется попробовать каждый из перечисленных ниже обходных путей, а затем посмотреть, какой из них принесет вам успех. Итак, имея это в виду, давайте начнем.

Предварительное условие: загрузитесь в BIOS

Большинство исправлений, которые мы собираемся выполнить, потребуют от вас загрузки компьютера в BIOS. Таким образом, вы можете обратиться к приведенным ниже инструкциям для выполнения указанной задачи.

1. Для начала выключите компьютер. Затем снова включите его.
2. Как только он загрузится, непрерывно нажимайте клавишу Esc [or any of these keys: Del, F2, F8, F10, or F12].
3. Это вызовет меню «Пуск». Теперь просто нажмите клавишу, соответствующую BIOS, и ваш компьютер загрузится с экраном BIOS.

ИСПРАВЛЕНИЕ 1. Принудительное определение IDE

Ваш первый курс действий должен состоять в том, чтобы заставить BIOS принудительно обнаружить следующие четыре IDE: первичный ведущий IDE, основной подчиненный IDE, вторичный ведущий IDE и вторичный подчиненный IDE. Вот как это можно сделать-

1. Загрузите свой компьютер в BIOS и перейдите на вкладку «Дополнительно».
2. Затем измените статус следующих четырех IDE с Not Detected на AutoPrimary IDE Master, Primary IDE Slave, Secondary IDE Master и Secondary IDE Slave.

Теперь сохраните изменения и перезагрузите компьютер.

Проверьте, исправляет ли он ошибку «Активный раздел не найден» в Windows.

ИСПРАВЛЕНИЕ 2. Сброс BIOS

Затем вам следует рассмотреть возможность сброса BIOS до заводского состояния по умолчанию. Это устранит все проблемы, связанные с поврежденными настройками BIOS. Поэтому обратитесь к приведенным ниже инструкциям, чтобы попробовать.

1. Загрузите компьютер в BIOS и перейдите на вкладку «Выход».
2. Затем выберите Загрузить настройки по умолчанию и нажмите Enter.
   
3. Наконец, нажмите YES в диалоговом окне подтверждения.
4. Теперь перезагрузите компьютер и проверьте, исправляет ли он ошибку Active Partition not found в Windows.

ИСПРАВЛЕНИЕ 3: восстановление системных файлов

Эта проблема также может возникнуть в случае повреждения системных файлов. Поэтому давайте «исправим» эти файлы, используя приведенные ниже инструкции, а затем проверим результаты.

1. Для начала загрузите компьютер в среду восстановления Windows.
2. Затем выберите «Устранение неполадок»> «Дополнительные параметры»> «Восстановление при загрузке».
3. Теперь дождитесь завершения процесса и проверьте, исправляет ли он ошибку Active Partition not found в Windows.

ИСПРАВЛЕНИЕ 4. Сделайте системный раздел активным

Что ж, если системный раздел стал неактивным, давайте вручную попробуем сделать его активным. Вот как это можно сделать

1. Для начала загрузите компьютер в среду восстановления Windows.
2. Затем выберите «Устранение неполадок»> «Дополнительные параметры»> «Командная строка».
   
3. Теперь выполните следующие команды, одну за другой, в этом окне CMD.
4. После этого перезагрузите компьютер и проверьте, исправляет ли он ошибку Active Partition not found в Windows.

ИСПРАВЛЕНИЕ 5: Восстановить MBR

Повреждение основной загрузочной записи может быть еще одной причиной, по которой вы сталкиваетесь с этой проблемой. Итак, давайте попробуем исправить эти данные, используя приведенные ниже инструкции.

1. Для начала загрузите компьютер в среду восстановления Windows.
2. Затем выберите «Устранение неполадок»> «Дополнительные параметры»> «Командная строка».
   
3. Теперь выполните следующие команды одну за другой в этой CMD-команде windowbootrec.exe /fixmbr bootrec.exe /fixboot bootrec.exe /scanos bootrec.exe /rebuildbcd
4. После этого перезагрузите компьютер, и теперь основная ошибка будет исправлена.

Вот и все. Это были пять различных методов, которые помогут вам исправить ошибку Active Partition not found в Windows. Если у вас есть какие-либо вопросы относительно вышеупомянутых шагов, сообщите нам об этом в комментариях. Мы вернемся к вам с решением в ближайшее время.

Источник

5 solutions to Fix “Active Partition Not Found” in Windows 7?

The error “active partition not found” appears when starting your computer? In this post, 5 solutions are provided. Choose any of them in terms of your own requirement.

By Lucas / Last Updated March 4, 2022

Error explanation: active partition not found

An active partition is a partition on the boot drive, which contains the operating system, used to boot your computer into windows. And there is only one partition can be set as an active partition to boot Windows. Thus, if you encounter the error “active partition not found press any key”, you should consider the following causes:

в—Џ The partition that contains boot files is inactive. The partition that contains the operating system has to be active so that your computer can boot.
в—Џ Master Boot Record disk is damaged. MBR is a special type of boot sector at the beginning of disk and contains crucial information about OS boot. It plays an important role in booting Windows? Click Wikipedia page to know more MBR information:
в—Џ The system disk cannot be detected by BIOS. When starting a computer, the BIOS would get the computer system started. If the system disk can’t be detected, your computer can’t start.
в—Џ The BIOS settings are set improperly. Incorrectly set may cause many issues, you can set BIOS to default setting to fix.
в—Џ Windows system files are corrupted . The system files have to be valid, otherwise, it can trigger boot issues.

How to fix “active partition not found” in Windows 7/8/10?

Now, follow the next context, no matter you are using Lenovo, HP, Dell, or running Windows 10, Windows 8, Windows 7, you can try these 5 solutions to fix the error “active partition not found”.

Solution 1. Launch Startup Repair

When Windows fails to start or some errors appear, you can first launch “Startup Repair” tool from installation CD. It is a repairing program to diagnose your system and fix the found problems.

Step 1. Insert the installation CD/DVD, and enter BIOS. Set the CD/DVD as boot drive.

Step 2. Select an appropriate language and time and click “Next”.

Step 3. In the install interface, choose “Repair your computer” > “System Recovery Options” > “Startup Repair” to start repairing your system.

And when it is finished, restart your computer.

If the error “active partition not found” is still there, try other solutions.

Solution 2. Set boot partition active

The error “active partition not found” appears during Windows 7,8,10 startups, it may be because the boot partition is inactive. So, how to set the boot partition to active? Let us walk you through the specific steps.

в—Џ If you have the Windows 7 installation CD

If you have the Windows 7 installation CD or other Windows system CDs matching with system, you just insert it to computer and follow the steps to fix your computer.

Step 1. Boot your computer and hit the functional key (Esc, Del, F2, F8, F10 or F12) to enter BIOS Setup, and set the installation CD as the boot drive.

Step 2. Choose the right language and time, and click “Next”.

Step 3. In the install interface, choose “Repair your computer” > “Command Prompt”.

Step 4. Then you will enter the Command Prompt Window, and input the following commands, and press Enter after each one.

в—Џ diskpart (the Diskpart window will be opened)
в—Џ list disk
в—Џ select disk n (n means you the drive letter of your system disk)
в—Џ list partition
в—Џ select partition x (x is the partition where the MBR at)
в—Џ active

When the “DiskPart marked the current partition as active” appears on the screen, restart computer.

в—Џ If you don’t have an installation CD

It may be complicated for computer beginners to set active via Windows installation CD and to operate Command Prompt. And you probably don’t have an installation CD.

Fortunately, you can turn to AOMEI Partition Assistant Standard Edition , which is free disk management software. It can help you to create a bootable media to set partition active. Let’s see the detailed steps.

вњЌPreparations:

A working Windows-based computer

A blank USB flash drive or CD/DVD. If there are some data on it, please backup the pen drive beforehand.

Step 1. Insert USB into a working computer. Install and run AOMEI Partition Assistant on it as well. Click “Make Bootable Media” and click “Next”.

Step 2. Select the USB Boot Device, then follow the instructions and make the USB bootable.

Step 3. Insert the bootable USB to the computer that got the “active partition not found press any key” error. And enter BIOS to set the USB as the boot drive.

Step 4. Then you will see the interface of AOMEI Partition Assistant, and right-click the partition that contains boot files, and select “Advanced” > “Set Active Partition”.

Step 5. Then click “OK” to confirm the operation.

Step 6. In the main interface, click “Apply” > “Proceed” to set the partition active.

When it is completed, restart your computer and check if it is fixed.

Solution 3. Repair MBR

MBR is a very important structure on the disk to contain the Partition Table and a small amount of executable code for booting OS smoothly. A corrupted MBR can result in some boot issues, like “ operating system not found ”.Therefore, repairing damaged MBR can also be an effective solution.

в– Repair MBR with installation CD

Step 1. Insert installation CD and boot computer from it. Then open the Command Prompt as a solution.

Step 2. Execute the following commands, press Enter after inputting each one.

в—Џ bootrec.exe /fixmbr
в—Џ bootrec.exe /fixboot
в—Џ bootrec.exe /scanos
в—Џ bootrec.exe /rebuildbcd

в– You can also repair MBR with AOMEI Partition Assistant

Step 1. Make a bootable USB with AOMEI Partition Assistant like the Solution 2 mentioned. And insert the USB to your computer, and set the bootable USB as the boot drive.

Step 2. When you see the AOMEI Partition Assistant, right-click the system disk and click “Rebuild MBR”

Step 3. Choose a correct MBR type according to your Windows system. For example, if your computer is running Windows 7, choose “Windows 7/8/10/2011/2012”.

Step 4. Click “Apply” > “Proceed” in the main interface to start rebuild MBR.

Solution 4. Check if the boot hard drive is detected by BIOS

Sometimes, the boot hard drive is not detected by BIOS. In this condition, the Windows can’t boot from it successfully. Then you have to make the BIOS detect the boot drive.

Step 1. Restart computer and enter BIOS Setup.

Step 2. Under the “Advanced” tab look up the “Primary IDE Master”, “Primary IDE Slave”, “Secondary IDE Master”, “Secondary IDE Slave”. And check if they are detected.

Step 3. If they are not detected, they would be shown as None/Not Detected. Use the arrow key to select it, and hit Enter and shift it to “Auto”.

Restart your computer and see if the error is fixed.

Solution 5. Set the BIOS to default settings

The error “active partition not found” can be caused by improper BIOS settings, follow the steps to set it to the default setting.

Step 1. Restart computer and enter BIOS, and find the “Load Optional Defaults” or other options with the same meaning, normally it is under the “Exit” tab.

Step 2. Hit the “F10” key to save and exit.

Conclusion

Commonly, the first solution can solve the “active partition not found” error. If it can’t, you could try the other solutions one by one. I hope they can help you out. For users without Windows installation CD, AOMEI Partition Assistant Standard is a great alternative to repair the “active partition not found” issue.

Moreover, you can upgrade to Professional Edition to unlock more functions to better manage computer and disk. For example, if your computer runs slowly, you can try allocating free space to C drive and, upgrade HDD disk to SSD, or align partition.

Источник

Active Partition is a hard drive partition which utilizes to boot the computer and contains the operating system data. In any particular computer, there can only be one active partition. The computer will not boot if there is an issue with the active partition; hence, you will not access any data stored there. As a result, the “Active partition not found! Press any key…” error indicates a problem with your bootable partition.

If this problem occurs, it is more than likely that it might be because of the following possibilities:

• The partition containing boot files is now inactive. The operating system partition must be active for your computer to boot.
• The Master Boot Record (MBR) disc has been damaged. MBR is a boot sector found at the beginning of a disc that includes essential information about the operating system’s boot process. Further to learn more about MBR, see the Wikipedia page.
• BIOS is unable to recognize the system disc. When a computer is turned on, the BIOS starts the system. If the system disc cannot detect, your computer will not start.
• The BIOS settings are incorrectly set. Incorrectly adjusted BIOS settings can create various problems, which you can resolve by resetting BIOS to default settings.
• The system files in Windows have been corrupted. The system files must be legitimate; otherwise, boot difficulties may occur.

There are a few options for dealing with the active partition not found problem. Fix your active partition not found error by following these troubleshooting steps in order.

Verify that BIOS Detects the Windows Installation Hard Drive

BIOS does not always detect the boot hard drive. Hence in this state, Windows is unable to boot from it reliably. The user must then configure the BIOS to recognize the boot drive.

1. To enter BIOS, restart the computer and keep pressing a specified key. Before the Windows logo displays, list the key to open BIOS on the first screen that opens. Esc, Del, F2, F8, F10, or F12 are the most likely options.
2. Go to the Advanced tab and look for Primary IDE Master, Primary IDE Slave, Secondary IDE Master, and Secondary IDE Slave. Then, see if they’ve been detected.
3. The BIOS does not recognize the hard drive if it’s listed as None/Not Detected. Change None/Not Detected to Auto and restart your computer to see if the error is fixed. If the system disc information appears after IDE Master/Slave, the BIOS has detected the hard drive, and you can proceed to the other solutions below.

Set BIOS to Default Settings

The error “active partition not found” can be due to improper BIOS settings, so follow these steps to set it to the default settings.

1. Restart your computer and enter BIOS.
2. On many PCs, you’ll see a line at the bottom that states Setup Defaults — F9. To restore the default BIOS settings, press this key and confirm OK or Yes. The “default settings” option may be found under various devices’ Security, Initialize, or Exit tab. Look for Restore Factory Defaults or Reset All Settings among the possibilities.
3. To save and exit, press F10. Check to see whether the ‘active partition not found error’ issue settles by restarting your computer. 

Repair System Files with Startup Repair

When Windows fails to start or errors arise, use the “Startup Repair” tool from the installation CD to fix the problem. It is a troubleshooting tool that will diagnose your system and fix any discovered issues.

1. Boot your machine from the Windows 10 installation disc.
2. Choose the appropriate time and keyboard layout, then click Next.
3. Select Repair your computer on the next screen.
4. Select Troubleshoot > Advanced options > Startup Repair from the Troubleshoot menu. Allow for the completion of the repair operation.

Make the System Partition Active

The error “active partition not found” arises during Windows 7,8,10 startup, maybe due to an inactive boot partition. So, how do you activate the boot partition?

1. Boot up from the Windows 10 installation DVD.
2. Select Repair your computer > Troubleshoot > Advanced options > Command Prompt from the drop-down menu
3. Type the following commands in Command Prompt and click Enter after each one:

diskpart

list disk

select disk 0 (replace 0 with your PC's primary disk)

list partition

select partition 1 (replace 1 with the system partition's number on your PC)

active

exit

 Check to see whether the issue settles by restarting your computer. 

Repair MBR

MBR is a critical disc structure that contains the Partition Table and besides a tiny bit of executable code for a smooth OS boot. Some boot difficulties, such as “operating system not found,” might be caused by a corrupted MBR. As a result, restoring a damaged MBR can be a viable option.

1. Boot the computer from the installation CD. Then, as a solution, open the Command Prompt.
2. Run the commands listed below, pressing Enter after each one.

bootrec.exe /fixmbr

bootrec.exe /fixboot

bootrec.exe /scanos

bootrec.exe /rebuildbcd

However, in case there is any error while repairing the MBR and this message appears – 

The selected disk is not a fixed MBR disk.

The ACTIVE command can only use on fixed MBR disks.

Then you can refer to Fix: The Selected Disk is not a Fixed MBR Disk  article to know more

Back-Up Windows in Case Errors Occur

You may face other unexpected issues in addition to the active partition not found message. Because system restoration is often the last resort for resolving problems, it’s critical to back up Windows regularly. Many software options are available for backing up all data types, Such as the AOMEI Backupper, CAT Data Recovery, Recuva, EaseUS, etc.

In case the OS got wipes, and this message appears,

visit How to Fix the ‘Missing operating system’ Error to fix this error.

To resolve the issue of an active partition not discovered in Windows 10, undoubtedly, you can use one of the four alternatives presented in this article. With the BIOS Setup Utility or Command Prompt, you should resolve the active partition not found error. However, these methods are precarious and require the utmost care and precision during execution, and any inconvenience or damage to the device is the user’s sole responsibility.