Openvr runtime is not installed как исправить

SteamVR is a virtual reality platform that’s compatible with Vive, Windows Mixed Reality, and Oculus Rift headsets.

However, error 306 can arise for some users when they try to launch SteamVR. The full error 306 message says this:

Error Starting SteamVR – SteamVR failed to initialized for unknown reasons (Error: Shared IPC Compositor Connect Failed (306))

SteamVR doesn’t start when that issue arises. Speaking of problems, users also reported other possible variations. Check them out below!

Where does this error occur and what can I expect?

• SteamVR failed initialization with error code vriniterror_init_hmdnotfound (VR init error HMD not found is one of the most frequent error codes, but there can be others as well)
• SteamVR error 436, 435, 301, 475, 309, 119, 307, 303, 0 or SteamVR fail -203
• Frequently associated with Oculus Quest 2: SteamVR Compositor had an error on present (108)
• SteamVR error during OpenVR (Also found under this form: OpenVR runtime is not installed)

If you need to fix the SteamVR 306 error, check out these potential resolutions for that issue.

How can I fix SteamVR error code 306?

1. Update your drivers

There are a few ways you can update your graphics card’s driver, but the most straightforward method is to utilize driver updater software.

A quick DriverFix scan will display a detailed report that shows driver versions for your PC’s devices and which ones need new drivers.

Thereafter, you can select to update your graphics card’s driver if required. DriverFix will then download your GPU’s latest driver for you.

If you’re utilizing DriverFix Pro, you can then select an Automatically Install option to quickly install the driver without needing to extract and open its setup wizard.

Various errors are the result of a malfunctioning driver. When this is the case, you may need to update or reinstall completely this specific component. As the process is not straight-forward to complete, we recommend using an automated tool for the job. Here’s how to do it:

1. Download and install DriverFix.
2. Launch the app.
3. Wait for the software to detect all your faulty drivers.
4. You will now be presented with a list of all the drivers that have issues, and you just need to select the ones you’d liked fixed.
5. Wait for DriverFix to download and install the newest drivers.
6. Restart your PC for the changes to take effect.

DriverFix

Keep your Windows safe from any type of errors caused by corrupted drivers, by installing and using DriverFix today!

Disclaimer: this program needs to be upgraded from the free version in order to perform some specific actions.

---

2. Connect your VR cable with your graphics card’s primary port

1. First, disconnect the HDMI cable for your monitor from the main port on your desktop graphics card.
2. Then plug the VR cable (from the VR box) into the graphics card’s Main Port/Primary Port.
3. Reconnect your monitor via your graphics card’s secondary port.
4. If your SteamVR app is running, close and restart it to see if the error 306 issue persists.

3. Opt into SteamVR Beta Update

1. Open your Steam client software.
2. Select the Library tab in Steam.
3. Right-click SteamVR on the left of the Library tab to select its properties window.
4. Select the Betas tab shown directly below.
   
5. Then choose the beta – SteamVR Beta Update option on the drop-down menu.
6. Press the Close button.

4. Clean boot Windows

1. Open the Run window.
2. Input this run command in the Open box: msconfig
3. Click the Selective Startup radio button.
   
4. Deselect the Load startup items setting.
5. Make sure you’ve selected the Load system services and Use original boot configuration checkboxes.
6. Deselect the checkbox for Hide all Microsoft services shown directly below.
   
7. Click Disable all to disable remaining third-party services.
8. Select the Apply option to save the new settings.
9. Select the OK option to close the MSConfig utility.
10. Select the Restart option on the dialog box that opens.
11. Then try launching SteamVR after clean-booting Windows.

Note: Steam confirms Razer Synapse, Avast Antivirus, and the Asus AI Suite conflict with SteamVR and its drivers. So, uninstalling those conflicting programs might also help resolve SteamVR error 306.

5. Uninstall Natural Locomotion

1. To launch Run, press the Windows and R keys at the same time.
2. Input this command for opening the Windows uninstaller in the Open text box: appwiz.cpl
3. Select the Natural Locomotion software within the Programs and Features applet.
   
4. Click the Uninstall option for Natural Locomotion to remove that software.
5. Press the Windows + E hotkey to launch File Explorer.
6. Open the config folder in File Explorer at this path: D:Program Files (x86)Steamconfig
7. Right-click the locomotion subfolder and select Delete.

Those are some of the more probable fixes for resolving SteamVR error 306 that are worth a shot.

You can also contact Steam via the Steam support page if further potential resolutions for error 306 are required.

SteamVR is a virtual reality platform that’s compatible with Vive, Windows Mixed Reality, and Oculus Rift headsets.

However, error 306 can arise for some users when they try to launch SteamVR. The full error 306 message says this:

Error Starting SteamVR – SteamVR failed to initialized for unknown reasons (Error: Shared IPC Compositor Connect Failed (306))

SteamVR doesn’t start when that issue arises. Speaking of problems, users also reported other possible variations. Check them out below!

Where does this error occur and what can I expect?

• SteamVR failed initialization with error code vriniterror_init_hmdnotfound (VR init error HMD not found is one of the most frequent error codes, but there can be others as well)
• SteamVR error 436, 435, 301, 475, 309, 119, 307, 303, 0 or SteamVR fail -203
• Frequently associated with Oculus Quest 2: SteamVR Compositor had an error on present (108)
• SteamVR error during OpenVR (Also found under this form: OpenVR runtime is not installed)

If you need to fix the SteamVR 306 error, check out these potential resolutions for that issue.

How can I fix SteamVR error code 306?

1. Update your drivers

There are a few ways you can update your graphics card’s driver, but the most straightforward method is to utilize driver updater software.

A quick DriverFix scan will display a detailed report that shows driver versions for your PC’s devices and which ones need new drivers.

Thereafter, you can select to update your graphics card’s driver if required. DriverFix will then download your GPU’s latest driver for you.

If you’re utilizing DriverFix Pro, you can then select an Automatically Install option to quickly install the driver without needing to extract and open its setup wizard.

Various errors are the result of a malfunctioning driver. When this is the case, you may need to update or reinstall completely this specific component. As the process is not straight-forward to complete, we recommend using an automated tool for the job. Here’s how to do it:

1. Download and install DriverFix.
2. Launch the app.
3. Wait for the software to detect all your faulty drivers.
4. You will now be presented with a list of all the drivers that have issues, and you just need to select the ones you’d liked fixed.
5. Wait for DriverFix to download and install the newest drivers.
6. Restart your PC for the changes to take effect.

DriverFix

Keep your Windows safe from any type of errors caused by corrupted drivers, by installing and using DriverFix today!

Disclaimer: this program needs to be upgraded from the free version in order to perform some specific actions.

---

2. Connect your VR cable with your graphics card’s primary port

1. First, disconnect the HDMI cable for your monitor from the main port on your desktop graphics card.
2. Then plug the VR cable (from the VR box) into the graphics card’s Main Port/Primary Port.
3. Reconnect your monitor via your graphics card’s secondary port.
4. If your SteamVR app is running, close and restart it to see if the error 306 issue persists.

3. Opt into SteamVR Beta Update

1. Open your Steam client software.
2. Select the Library tab in Steam.
3. Right-click SteamVR on the left of the Library tab to select its properties window.
4. Select the Betas tab shown directly below.
   
5. Then choose the beta – SteamVR Beta Update option on the drop-down menu.
6. Press the Close button.

4. Clean boot Windows

1. Open the Run window.
2. Input this run command in the Open box: msconfig
3. Click the Selective Startup radio button.
   
4. Deselect the Load startup items setting.
5. Make sure you’ve selected the Load system services and Use original boot configuration checkboxes.
6. Deselect the checkbox for Hide all Microsoft services shown directly below.
   
7. Click Disable all to disable remaining third-party services.
8. Select the Apply option to save the new settings.
9. Select the OK option to close the MSConfig utility.
10. Select the Restart option on the dialog box that opens.
11. Then try launching SteamVR after clean-booting Windows.

Note: Steam confirms Razer Synapse, Avast Antivirus, and the Asus AI Suite conflict with SteamVR and its drivers. So, uninstalling those conflicting programs might also help resolve SteamVR error 306.

5. Uninstall Natural Locomotion

1. To launch Run, press the Windows and R keys at the same time.
2. Input this command for opening the Windows uninstaller in the Open text box: appwiz.cpl
3. Select the Natural Locomotion software within the Programs and Features applet.
   
4. Click the Uninstall option for Natural Locomotion to remove that software.
5. Press the Windows + E hotkey to launch File Explorer.
6. Open the config folder in File Explorer at this path: D:Program Files (x86)Steamconfig
7. Right-click the locomotion subfolder and select Delete.

Those are some of the more probable fixes for resolving SteamVR error 306 that are worth a shot.

You can also contact Steam via the Steam support page if further potential resolutions for error 306 are required.

Steam is one of the most popular online gaming platforms and it has a large and dedicated userbase that consumes every last bit of the products and features that they put out. However, recently, we have been getting some reports of the SteamVR Error 306 which sometimes states “Error Starting SteamVR” and the full message states “SteamVR failed to initialized for unknown reasons (Error: Shared IPC Compositor Connect Failed (306))“.

This error obviously prevents the user from being able to use SteamVR and is therefore a big annoyance. Therefore, in this article, we have set out to completely fix it using the methods and workarounds that we have listed below. Make sure to follow this guide carefully and accurately in order to avoid any mistakes. Also, make sure to sift through the most probable causes that we have listed below in order to make sure that you fully wrap your head around as to why this issue occurs in the first place.

What Causes the SteamVR Error 306: Shared IPC Compositor Connect Failed (306) Issue?

After going through some basic troubleshooting practices, we concluded that the following were some of the most major reasons due to which the SteamVR error 306 occurs.

• Port Issues/Connector Issues: If you have connected the VR Headset into a secondary port on your computer, the Steam VR Error 306 or Steam VR Error 400 might pop up while you try to use it. This is because the VR headset needs to be on the primary HDMI port in order to work correctly. The same goes for if you are using any connectors on the HDMI/ Display Port slots.
• Outdated Software: Some users might receive the Error Starting SteamVR message if they have installed outdated software for their VR headsets or if they are using outdated drivers. It is very important that you update all the associated software before you move on towards using VR.
• Incorrect Installation of GPU Drivers: If the GPU drivers on your computer haven’t been installed properly or if you have installed a version that isn’t completely compatible with SteamVR, the Steam VR Error 306 will be triggered and you will see the Shared IP Compositor Connect Failed (306) message on your screen.
• Steam Beta: Another probable cause behind the SteamVR Error 306 is the enabling or disabling of the Steam Beta option. For some users, having beta enabled was able to fix the issue while for some, having it disabling was the setting that fixes the issue. Therefore, you need to experiment with this setting and check if changing it helps you in fixing the issue.
• Natural Locomotion: Natural Locomotion is a software that allows users to have better functionality within SteamVR but it can sometimes cause recognition issues due to which SteamVR cannot be started. Therefore, it is recommended that you try and uninstall this software and check if that makes the difference.

Now that you have been made familiar with the reasons due to which this issue is triggered. We can finally move on towards implementing the solutions.

Before you Start:

1. Make sure that you try to restart both your Steam and your computer to ensure that you rule out some basic troubleshooting.
2. If you are using a DPI adapter or any other sort of adapter, make sure to completely remove those and connect the VR’s HDMI cable into the primary port of the GPU.
3. Make sure that if you haven’t attached a camera to your computer, it isn’t enabled in the SteamVR because that can sometimes trigger this error as well.
4. If you have the RiftCat and ALVR Driver installed on your system, make sure to uninstall them as they can sometimes cause conflicts.

Fixing the SteamVR Error 306: Error Starting SteamVR

Solution 1: Using the Correct Port

All Graphics Cards have a couple of different ports at their back which you can use to connect multiple displays to your computer. However, what you might not know is that each port has a number assigned to it in terms of hierarchy. For example, one port might be the secondary port to which you would typically connect the secondary display and the other might be the primary one to which you should have the primary display connected.

Your VR Headset requires you to connect to the Primary HDMI port in order for the SteamVR software and the headset to work correctly. Therefore, Remove the Monitor’s Display cable from the primary HDMI slot and connect the VR headset to it instead. Determining the Primary HDMI slot might be a chore for some Graphics cards but it is usually the first one from the top of the GPU.

If this doesn’t work, make sure to remove all the displays connected to the GPU and only connect the HDMI cable of the VR Headset itself. After doing this, make sure to connect only one Monitor in the secondary slots and check if the computer works in this configuration. If it does, it means that you might have to disconnect other forms of the display except for your VR headset and the monitor.

Solution 2: Reinstalling SteamVR Driver and Toggling Direct Mode

1. Disconnect the HDMI cable for the VR headset from your computer.
2. Launch up SteamVR and click on the Menu option.
3. From the menu, click on the “Settings” option to launch the SteamVR settings.
4. Inside the settings, click on the “Developer” option on the left side of the window.
5. Under the “Reset” option on the right-hand side, click on the “Remove all SteamVR USB Devices”
   
6. Now in the developer options, make sure to toggle the “Enable Direct Mode Only” setting if it is disabled and if it is already enabled, make sure to click on the “Disable Direct Mode Only” setting.
7. After completing these steps, connect the HDMI cord of the VR Headset back into the GPU and also connect all the other cables.
8. Launch the program associated with your VR Headset such as PiMax’s PiPlay.
9. It will install all the missing drivers on your computer and run SteamVR as you would normally.
10. Enable the compositor and check to see if the Steam VR Error 306 has been fixed.

In some cases, you might need to reinstall the VR Drivers manually. In order to do so, you can follow the guide below.

1. Disconnect the VR headset from your computer.
2. Press “Windows” + “R” to open the Run prompt.
3. Inside the Run prompt, type in “devmgmt.msc” and press ‘Enter” to launch the device manager.
   
4. Inside the device manager, find the VR headset driver and right-click on it.
5. Select the “Uninstall” button to remove the driver completely from your computer.
6. After doing this, make sure to reinstall all the drivers again and see if the SteamVR error 306 has been fixed.

Solution 3: Uninstalling USB Drivers

In some cases, Uninstalling the USB drivers on your computer can help in fixing the Steam VR Error 306 and Steam VR Error 400 as well. To do that:

1. Disconnect the VR headset from the back of your computer.
2. Press “Windows” + “R” simultaneously to open the Run prompt.
3. Type in “devmgmt.msc” and press ‘Enter” to launch the device manager.
   
4. Inside the device manager, click on the “Human Interface Devices” dropdown and right-click on the “USB Input Device”.
5. Select the “Uninstall” button to remove the driver completely from your computer.
6. After doing this, make sure to connect the VR Headset back into the computer and check to see if the driver is automatically installed.
7. If it isn’t, you can go back to the Device Manager and scan for hardware changes to install the driver back.
8. Check to see if doing so has fixed the SteamVR Error 306 Compositor Connect Failed issue on your computer.

Solution 4: Opting into SteamVR Beta

1. Launch Steam and login with your credentials.
2. After logging in, click on the “Library” option on the top and then click on the search bar to search your library.
3. Type in “SteamVR” and the SteamVR tool will appear.
4. Right-click on the tool and then select the “Properties” option.
   

   
5. Once in the properties, click on the “Betas” option from the top.
6. Click on the “beta – SteamVR Beta Update” and close out of this window.
7. Now try to run the game and check to see if you still get the SteamVR Error 306 Compositor Connect Failed.

Solution 5: Remove Natural Locomotion Software

1. Press “Windows’ + “R” to open the Run prompt.
2. Type in “Appwiz.cpl” and then press “Enter” to launch into the application wizard.
   
3. Inside this window, scroll down and look for the “Natural Locomotion” application.
4. Right-click on this app and select the “Uninstall” button.
   
5. Follow the on-screen instructions to completely remove this file from your computer.
6. After that, open your Steam installation directory and go into the “Config” folder.
7. Remove the Locomotion Folders from this location as well if you find any.
8. Run SteamVR and check to see if you are now able to fix SteamVR Error 306.

Solution 6: Reinstalling GPU Drivers

1. As a last resort, you can try and perform a fresh install of your GPU drivers and check if you are able to fix the SteamVR Error 306 and SteamVR Error 400 by doing so.
2. For that, download the DDU software from this website.
3. After downloading the software, follow the onscreen instructions to uninstall your respective GPU Drivers.
4. After uninstalling, you will automatically be shifted to the Microsoft Basic Visual Adapter.
5. Navigate to the AMD or Nvidia website and download the drivers for your respective GPUs.
6. Install these drivers and check to see if doing so fixes the SteamVR 306 and the SteamVR 400 error on your computer.

Hopefully, the error might have gone by now but if you need further assistance, contact here.

SteamVR is a Virtual Reality Platform developed by Valve as an extension of Steam. SteamVR offers 360 degrees, full room VR experience. It was officially announced on March 1, 2015, during the Mobile World Congress. As a platform, SteamVR not only supports its own HMDs such as the Vive but also other HMDs like the Rift.

However, users are experiencing the error message “Error Starting SteamVR” when they try opening the SteamVR application. The full error message is “Error: Shared IPC Compositor Connect Failed (306)”. In this article, we will discuss the numerous reasons due to which this error can be triggered.

What Causes SteamVR Error 306?

Since SteamVR makes use of a lot of components on your computer as compared to the normal Steam, there are various reasons which can trigger this particular error message. Here are some of the reasons why this might happen:

Now that you have a basic understanding of the nature of the problem, we will move on towards the methods. Down below, you’ll discover a collection of methods that other users in a similar situation have successfully used to resolve the issue.

Method 1: Using Primary HDMI Port

Sometimes this error can be related to your HDMI cable,  it means that your HDMI cable of VR might not be in the primary HDMI port of your system. We need to use a primary port always for the VR to work correctly. Also sometimes the adapter or the in-between device; connecting the box HDMI cable to your Graphics card HDMI port, should be not used. So, connected the VR HDMI cable coming from the box directly to your HDMI port on your Graphics card will be better.

1. Take out the Monitor HDMI cable from your Graphics card main port
2. Now, put the VR cable in “Main Port/Primary Port”, which is coming from the VR box
3. The monitor cable can be in the secondary port because it will still work while the VR won’t
4. Now quit the SteamVR window, and restart it again.

For those who have single port only, you can only use your main HDMI port for the VR, or you can get an adapter if it works with your system.

Method 2: Trying the SteamVR Beta

Several users fixed error 306 by changing the SteamVR properties settings. In the properties settings, you have BETAS tab, and there you can select the beta for VR to opt into. By default, it will be selected to none, but you can change it to beta and wait for the SteamVR to update it. To change the SteamVR to beta follow the steps below:

1. On your computer, open the Steam App
2. Under Library, you will find the “SteamVR”
3. Now, right-click SteamVR, and then click Properties
4. After that select the “BETAS” tab
5. Here in “Select the beta you would like to opt into” drop-down, you need to select “beta – SteamVR Beta Update”
6. Close the window, and wait for SteamVR to finish updating.
7. If you want to turn it off in the future, you can select “None – Opt out of all beta programs” back again.

Method 3: Installing Graphics Drivers Manually

As it turns out, one reason that might trigger Error 306 is the outdated Graphics driver. Several affected users have reported that the issue has not longer occurring after they update the Nvidia Graphics drivers to the latest ones or by uninstalling and then reinstalling it. Also, the Nvidia Vulkan can mess up things for the drivers by having the wrong library path in their files.

In this method, we will be uninstalling the Graphics Drivers and then manually installing them from the manufacturer’s website. Make sure you download Display Driver Uninstaller from here and save it on desktop or external drive before you boot into safe mode.

1. Follow the instruction in our article on how to boot your computer into safe mode
2. Once you start in safe mode, you can copy DDU file to desktop if you saved it onto USB and extract it on desktop
3. Now open the Display Driver Uninstaller by clicking on the DDU icon
   Note: It might show “Windows 8.1” for system detection, even you are using Windows 10, that is normal
4. You can choose the option for Card Type that you are using
5. Then selection first option “Clean and Restart”, it will take some time to process the clean uninstall and then the system will Reboot
6. After the system reboots in normal mode, you can go to the manufacturer’s site of your Graphics Card and Install the latest drivers

Method 4: Uninstalling Natural Locomotion

Natural Locomotion or NaLo is a paid app that translates arm swing into trackpad input for locomotion. It is very helpful for playing on VR, also helps with sickness a bit. But this can be causing the error 306 because the driver they use is not compatible yet with SteamVR beta. You need to uninstall this and try running the SteamVR with Motion Smoothing. Follow the steps below to uninstall it:

1. Go to Control Panel from the start menu or by searching
2. Now, open Program and Features
   
3. Find the Natural Locomotion, and Uninstall it
4. Also, go to your steam directory and open config folder:

   D:Program Files (x86)Steamconfig
   

   

5. Then remove the two folders of locomotion from the config
6. Now open the SteamVR and test it in Motion Smoothing