Плохое соединение вар тандер как исправить

Моего провайдера выкупил ростелеком и через год, вот уже как второй месяц, возникают периодические просадки скорости до нестабильных 1-2 мегабита в секунду из 80-90 в остальное время (пакетлост от 20 до 100%).

Просто провайдер такой, с этим ни чего не поделаешь. От времени суток, дня недели и т.д ничего не зависит может и ночью ничего не работать. Половину дня работает, а потом через каждые полчаса может сбоить. Техническая поддержка толком сказать ничего не может, знает меньше меня (или просто молчит), моё оборудование работает исправно (проверял), нагрузки на сеть нет. В моём случае выбирать не из чего, либо дорогой и лимитированный мобильный интернет, либо филиалы ростелекома с разными вывесками.

Проблема не лечится и создана самим провайдером, как минимум если речь о ростелекоме, решать они её точно не спешат. О чём можно говорить, если иногда даже вконтактик толком не подгружается с их просадками.

War Thunder is a free-to-play, cross-platform military MMO game. It gained a lot of traction and is one of the most played games on Steam. You can fly warplanes, drive tanks and wreak havoc to your enemies.

The fact that you can play this game entirely for free makes it even more appealing for players all over the world.

Therefore, it’s easy to see why it’s so popular and why sometimes the game servers get overcrowded.

As a result, some unwanted phenomena might occur in the form of high ping/latency, jitter, and packet loss.

Usually, you can’t tell the difference, but take our word on this: packet loss is one of the worst things you could encounter in live-action games.

What is packet loss?

To put it shortly, whenever you send or receive data online, some of the packets might never make it to their destination. We refer to this as packet loss. Now packet loss can take two forms:

• Outbound packet loss – affects data flow that goes from your PC toward the destination servers
• Inbound packet loss – traffic that comes from the destination server toward your PC

Whenever this happens, you might notice some quite familiar, yet annoying behavior. Namely, Rubberbanding and high latency/ping, connection timeouts, or game crash.

If you still have no idea what we’re talking about, picture this: you’re shooting at an enemy vehicle, but it seems that it’s not taking damage. All of a sudden, the vehicle is out of sight, and you’ve missed your chance to pulverize it.

Hence, there are more players who experience game issues on War Thunder and these are as follows:

• War Thunder high packet loss
• War Thunder high ping and packet loss
• War Thunder low ping high packet loss
• War Thunder operation timed out
• War Thunder not loading
• War Thunder connection to server lost

In general, that’s what packet loss implies regarding your game and what you should first know about this connection issue.

So, does using a VPN improve packet loss? Sometimes, when your ISP throttles your bandwidth and/or leaks packets, you can use a VPN to reduce packet loss and improve ping.

You may also wonder if using a VPN improve my ping? Yes, you can improve your War Thunder in-game ping by using a VPN. Here are our best VPNs to improve ping and gameplay.

Why is my packet loss so high in War Thunder?

The reasons why you might experience packet loss in War Thunder are many and various. For instance, you might leak packets if you have an old, chewed-up, flaky Ethernet cable between you and your router.

More so, if there are many users on your network, you might experience network congestion. This, in turn, leads to packet loss.

The good news is that packet loss rarely occurs because of you. If you never had this issue so far, chances are slim that you’re what’s causing it to begin with. Therefore, network congestion is still our usual suspect in this case.

However, sometimes your ISP might throttle your bandwidth to minimize costs. Or the War Thunder server might take a huge blow from all the simultaneous connections.

All of these can be the cause of your packet loss situation.

How can I fix packet loss on War Thunder?

1. Use a VPN

1. Download ExpressVPN to your PC.
2. Install it on your system.
   
3. Launch it and log into your account.
   
4. Connect to the server of your choice.
5. Launch War Thunder and check if you’re still leaking packets.

ExpressVPN is an excellent all-around VPN tool from Kape Technologies. It can help you protect your privacy and secure your connection.

Plus, it can unblock geo-restricted content, and reduce packet loss with its high-speed servers. It also has 24/7 live chat support.

ExpressVPN

Leaking packets in War Thunder? This software can lend you a helping hand.

However, it’s worth mentioning that using a VPN won’t work 100% in all cases. In order for this fix to work, the packet leak must occur on your ISP’s side of the connection.

Thus, if you or the game server leak packets, using a VPN connection won’t work.

2. Troubleshoot your connection manually

1. Use our guide on packet loss to run a complete ping/packet loss test
2. Locate the hops where the ping spikes
3. Depending on your findings, take appropriate actions

You might notice high ping/packet leaks in the following locations:

• Your home network
• ISP’s network
• The servers of the network distribution company
• War Thunder game servers

Therefore, you can try one of our suggestions below to fix packet loss in War Thunder:

• Check if the devices on your network function properly (cables, PCs, routers)
• Talk to your ISP about the issue
• Ask your ISP to talk to the network distribution company
• Contact the War Thunder support team if the issue is on their side

War Thunder server ping & packet loss test

It is quite intuitive how to test your packet loss or high ping levels on your game. The step-by-step process goes like this:

1. Connect to your VPN using another server location.
   
2. Go online and see if your Internet connection is improved.
3. If it works, it means that your ISP may throttle your network.
4. In case it doesn’t work, the cause can be your cables or router distance.

Many players are wondering how to fix War Thunder packet loss. So you can utilize ExpressVPN, but only if you’re sure that your ISP leaks the packets, or troubleshoot your connection.

All things considered, it’s not exactly difficult to fix packet loss in War Thunder if you know where to start and understand what packet loss is.

There are a lot of causes for leaking packets, and as a result, there are also a lot of potential fixes.

You can check out the best VPNs for gamers that can improve your ping. And, visit the Gaming hub to discover more reviews and guides.

However, keep in mind that packet loss usually comes and goes, and the best way of tackling it is to wait it out. If you notice a pattern or the issue doesn’t fix itself after a while, you can step in and try some of our suggested fixes.

In order to give assistance with packet loss  we need to find out where the packets get lost.

Either your house line, somewhere in your Intener Provider’s (ISP) network or the destination’s network.

A high ping is usually the result of either high packet loss (so the packets have to be resent) or a server/line under heavy load or a congested port/internet exchange point.

To do so we trace the route to a server and obeserve the results in the Windows-Console.

Additionaly I’m gonna show you how to directly write the results to a file in case you want to copy and/or attach it to posts, e-mails, etc.

How to test for packet lost, high ping and how to create the Netinfo file

1.  Go to Start > All Programs > Accessories, right-click the Command Prompt and select “Run as administrator”

or

Windows 10: Type cmd into the search bar right click command prompt an choose “Run as administrator”

Windows 8, 8.1: Press the Windows key and X together and then click on Command Prompt (Admin). Click Yes to the User Account Control message that appears.

2.  Copy and paste the below commands into your command prompt.  

ipconfig /all > c:netinfo.txt

Once the command prompt returns type: tracert 95.211.246.163 >> c:netinfo.txt  (replace 95.211.246.163 with an IP adress of the server/s you experience packet loss on)

Once the command prompt returns type: pathping 95.211.246.163 >> c:netinfo.txt (replace 95.211.246.163 with an IP adress of the server/s you experience packet loss on)

pathping can take up to 10 minutes depending on how many hops your routing to the server has so don’t exit the console even if it may seems to be inactive!

(The console will give an estimated time on how long this operation will last)

Update March 2020: The IP adresses for the game servers can change at any time.

To get up2date IP adresses from the game servers you can use a packet analyzer like “Wireshark” to determine to which IP adress you’re connecting to.

This can be a lot more helpful as you can see what server you’re on that you’re currently expierence issues with.

How to determine where the packets get lost/the ping starts to spike:

The results of the packet loss test is displayed in the last part of the pathping operation:

– Hop 0 is your PC

– Hop 1 is connection from your PC to your router (LAN or Wireless/WLAN)

– Hop 2 is your router-> house line-> land line to your internet service provider (ISP)

From now on it’s very hard to determing to who the hops belong if you’re completely unexperienced with networking/routing.

– Usually Hop 3 to 4/5 (it can be a lot more hops depending how bad your ISP’s routing is) are within your ISPs network a way to determine who the server belongs to is the server name displayed next to its IP adress.

For example my ISP is the Deutsche Telekom AG (DTAG) servers which belong to their network have a name usually like this xyz.xyz.yxz.yxz.DTAG.DE [IP adress in brackets].

I will list some other ISPs here:

Verizon: xyz.xyz.yxz.yxz.verizon-gni.net 

Edited March 4, 2020 by Magicool