Turn power off drain fryer как исправить

Содержание

• Проблемы пилота
• Горелка неисправна
• Проблемы контроля температуры
• Проблемы с фильтрацией масла

Frymaster — известный и часто используемый кулинарный инструмент в ресторанной индустрии. Если ваш Frymaster не работает эффективно, вы можете выполнить несколько шагов по устранению неполадок, чтобы диагностировать и устранить проблему. Типичные неисправности, с которыми может столкнуться Frymaster, обычно связаны с пилотом, горелкой, проблемами контроля температуры, фильтрацией масла или утечкой масла.

Проблемы пилота

Проверьте подачу газа. Убедитесь, что главный кран подачи газа открыт. Если он включен, но вы не можете зажечь Frymaster, возможно, засорилось пилотное отверстие или в газовых линиях есть воздух.

Очистите вокруг пилотного отверстия стальной щеткой, чтобы удалить весь мусор, который может засорить блок и препятствовать зажиганию пламени.

Проверьте, правильно ли подключен гибкий газовый шланг и подключена ли фритюрница.

Посмотрите, полностью ли закрыт сливной клапан, если у вас есть система фильтрации. Рукоятка клапана должна быть закрыта, чтобы питание поступало на газовый клапан, когда он взаимодействует с микровыключателем. Открытая ручка клапана — даже приоткрытая — не даст ему сработать.

Горелка неисправна

Поверните ручку горелки и зажгите пламя. Если огонь идет только с одной стороны или не горит со всех сторон должным образом, возможно, отверстия вашей горелки забиты. Выключите пламя, очистите отверстия металлической щеткой и снова зажгите.

Следите за колебаниями пламени. Это может быть вызвано колебаниями давления газа или воздуха в кухонной атмосфере.

Слушайте пламя горелки. Если он слишком шумный, давление газа может быть слишком высоким или газовый клапан заблокирован. Уменьшите давление и проверьте, не заблокирован ли газовый клапан, и удалите мусор металлической щеткой.

Проблемы контроля температуры

Проверьте температуру масла с помощью термостата или наконечника пирометра. Если температура не остается в пределах заданного значения, возможно, ваш термостат не калиброван, ручка или гибкий вал на валу термостата ослаблен, провод термостата отсоединен от блока или сломан, или термостат неисправен.

Проверьте провод, чтобы убедиться, что он подключен и не оборван. Если он отсоединен или болтается, подключите его. Если он сломался, придется заменить термостат.

Затяните ручку или вал термостата, если он ослаблен. Замените термостат, если эти решения не устранили проблемы с контролем температуры.

Проблемы с фильтрацией масла

Послушайте, чтобы определить, работает ли насос. Если насос работает, но масло не проходит через фильтр, посмотрите на фильтровальную бумагу и ее размер. Посмотрите на дно фильтровального лотка, чтобы убедиться, что уплотнительные кольца на месте. Если уплотнительные кольца отсутствуют или изношены, насос всасывает воздух и не позволяет фильтру работать должным образом.

Если насос не работает, дайте двигателю остыть не менее 15 минут. Найдите красный переключатель сброса на двигателе насоса, ближайшем к оператору, и нажмите его, чтобы перезапустить двигатель. Если двигатель перезапускается и насос начинает перекачивать, проверьте его эффективность. Если он запускается, но не перекачивает, насос может быть заблокирован из-за неправильного размера фильтра или неправильной установки, позволяющей проникать внутрь частицам пищи.

Отключите питание от системы фильтрации, снимите входной трубопровод с насоса и с помощью отвертки вручную поверните шестерни насоса назад, чтобы удалить застрявшие частицы, или поверните их вперед, чтобы более мягкие предметы прошли через насос.

Используйте шнек или дренажную змею, чтобы удалить частицы пищи, которые прошли и забили всасывающую трубку.

DISPLAYED MESSAGE

CONDITION/INDICATES

«Water Detected»

The Leak Detector component (see page 10) is

sensing the presence of water.

CM LCD Error Message

Warning:

If there is standing water in the area surrounding the

appliance DO NOT TOUCH any appliance, electrical

switch or electrical device while standing in water. If

water is continually flooding the area — locate and

close a shut off valve up stream from the water leak

or shut off the water supply to the building. Do not

return to service any appliance or iCOMM™

component until the surrounding floor and area

where you will be standing is completely dry.

Possible Causes:

• Leak Detector is currently exposed to water

• Leak Detector has not had sufficient time to dry

out after exposure to water

• Leak Detector wiring/circuit is shorted

• Leak Detector is defective

Service Note:

If there is no danger present from standing in water

press the Display Button on the CM several times to

silence the alarm if it is sounding — see Figure 2 on

page 6 and Display Button Operation on page 30.

Leak Detector operation is based on continuity. The

CM monitors the Leak Detector circuit and initiates a

Water Detected error message if the circuit is

closed. The Leak Detector must dry out completely

before the alarm condition can be cleared. The Leak

Detector will air dry over time or can be dried

manually when disconnected.

TROUBLESHOOTING ERROR MESSAGES

42

CHECK/REPAIR

• See Warning in first column if there is water on the

floor or area where you will be standing before

performing any procedures listed here.

• If there has been water flooding on the floor that

initiated this error message contact a qualified

service agent to correct/repair the cause.

• If after any water flooding conditions have been

repaired and the Leak Detector is no longer

exposed to water the Water Detected error mes-

sage continues: Turn off power to the CM — dis-

connect the round «5 VDC» power plug on the CM.

Dry out the Leak Detector component with paper

towels, compressed air or a heat gun. Restore

power to the CM.

• Ensure the Leak Detector is 100% dry. Turn off

power to the CM and disconnect the two Leak

Detector wires from the Leak Detector Terminal

Strip on the CM — see Figure 5 on page 10.

Closely inspect the wiring between the CM and

the Leak Detector for damage, pinched or shorted

wiring — replace any damaged or shorted wiring.

Use stranded 18/2 available from local electrical

supplies and home centers.

Using an ohm meter check for continuity between

the two wires disconnected. If there is continuity

present — replace the Leak Detector if you are cer-

tain it is completely dry and the wiring is not dam-

aged or shorted.

• Turn off power to the CM and disconnect the Leak

Detector wiring. Restore power to the CM. If the

Water Detected error message & alarm continues

call 888 928-3702 for further technical assistance.

DISCLOSURE: This post may contain affiliate links, meaning when you click the links and make a purchase, I receive a commission. As an Amazon Associate I earn from qualifying purchases.

Everybody loves that crispy taste of fried chicken. But no matter how hard you try, you can’t achieve that taste of fries or fried chicken at home. As a result, you end up ordering fried chicken instead of trying to make it at home.

But if you get a deep fryer, you can easily solve this issue and make delicious and crispy fried chicken at home. A deep fryer is a kitchen appliance in which you can cook food by submerging it in oil. The temperature of the oil in a deep fryer ranges from 350 °F to 375 °F.

The high temperature is the reason food gets light brown and crispy once it is cooked. For a long time, deep fryers were only used in commercial kitchens. They were manufactured while keeping the needs of commercial kitchens in mind.

But nowadays, household units are also available. As a result, more and more people are getting a deep fryer for their homes. But getting an air fryer and cooking food in it is one thing; taking care of it is another.

You have to keep your air fryer clean if you want to keep on enjoying crispy fried chicken at home. Sometimes, the lack of care can lead to problems. In such a situation, you can try to fix the issue at home first before taking your air fryer to the store for repairs.

T-fal is one of the most reliable companies for home appliances. It has been providing its customers with premium quality, durable products for many years. Usually, people hardly face problems while using T-fal products, but there can be issues after some years.

Recently, some customers reported trouble with the draining of the T-fal deep fryer. This issue can be complex as you cannot put your appliance in the dishwasher.

Here we will let you know more about this problem and the best possible solution to help people with the draining of their T-fal deep fryer.

Troubleshoot: T-fal Deep Fryer Not Draining

You can fix most of the basic issues with an electrical appliance at home. But people don’t realize this and go to the repair shop straightaway. If you are facing any issue with an electric appliance, you should not go to the repair shop before analyzing the problem.

This will more likely make you waste your money on something that you could have handled at home. The lack of knowledge about such issues is why people turn to the repair shop when an appliance is not working correctly.

Solutions for T-fal Deep Fryer Draining

If your deep fryer is not draining, you will have trouble cleaning the appliance. Once old oil begins to gather in your deep fryer, it will damage the inner walls of your machine. If you can’t drain the old oil, you also won’t make anything in your deep fryer again.

These are some of the reasons why draining a deep fryer is so important. Without draining, you won’t be able to get high-quality, delicious, and crispy food at home whenever you want.

Some of the primary issues that most people face while using a T-fal deep fryer are draining. Even after pressing the draining button, the deep fryer does not drain the oil. This can be a problem as it would lead to oil and residue buildup in the appliance.

If this issue is not fixed, your deep fryer will not make delicious foods for you. So here we’re mentioning some of the best solutions you need to look at if you own a T-fal deep fryer and are having trouble draining it.

1. The Temperature of Oil is High

A deep fryer relies on hot oil to make crispy fries, fried chicken, fish, and other snacks. If the oil inside the deep fryer is not hot, your food will not get cooked the way you want it to. But the hot oil that is useful when cooking can be damaging when draining the appliance.

In addition, the hot oil is hazardous in itself, whether in a deep fryer or a pan on the stove. Many times, people end up getting their skin burnt because of hot oil.

But the temperature of the hot oil in a deep fryer is much higher than the temperature of the oil in a pan, which is why you need to be more careful when handling a fryer. One of the most common reasons your T-fal deep fryer is not draining is that the temperature of the oil is too high.

The fryer can gauge the temperature, and if the oil inside it is very hot, it won’t let you carry on with the draining process. If you try to drain the oil while it is still hot, you can damage the deep fryer and hurt yourself as well.

If the oil temperature inside the T-fal deep fryer is high, wait for it to lower down. Only once the oil has cooled down should you try to drain it. If you follow these steps, you will be able to resolve the draining issue without any problem.

The high-temperature oil in the deep fryer can be very harmful to humans. It can cause fourth-degree burns on your skin. By not draining the hot oil, your T-fal deep fryer is taking care of you.

2. Automatic Filtration is Off

Modern appliances come with a lot of useful features. These features can make it easier for us to operate these appliances. For example, you may panic if your T-fal deep fryer is not draining, but sometimes, this problem can be caused by a minimal error.

Most of the time, users forget to turn on the automatic filtration switch, which becomes why their T-fal deep fryer won’t drain. If you don’t turn on the automatic filtration switch, the oil won’t be sent to the plastic container at the bottom of the deep fryer once the cooking is complete.

If all the oil is not in one place, you won’t be able to drain it. This is one of the reasons why your deep dryer won’t allow you to drain it. It is better to avoid draining the fryer without turning the automatic filtration switch on because otherwise, your appliance can get damaged.

Automatic filtration is one of the features of the T-fal deep fryer that can keep your appliance functional for years. Most of the time, people end up neglecting an appliance. But with a useful feature like this, you can keep your appliance working for years with only a little care.

3. Clogged Filter Grid

We all know how annoying it can be when something gets stuck in the kitchen pipe, and you can’t do the dishes. You have to wait for the plumber to come and fix the issue before you can get back to your chores. This proves that drainage is not possible when something is clogged.

If your deep fryer does not filter the oil properly, its filter grid may get clogged or partially blocked. Likewise, the clogged grid or partial blockage can be the issue if your deep fryer is not draining.

But if you are facing this issue, you don’t have to worry about it. There is a simple solution that can clear the filtration grid and make the draining process easier.

Empty your deep fryer and clean up the filtration grid with warm water and a non-metallic brush to resolve the issue. If you use a metallic brush, it will damage your deep fryer. It is one of the things that people don’t pay any attention to but can end up damaging an appliance.

You can also use dishwashing soap to clean up the blockage. After you are done with cleaning, push the red button at the fryer’s bottom for draining water. After it, your fryer is perfectly fine to work again.

Conclusion

A T-fal deep fryer is an ideal appliance for those who want to make crispy fried food at home. It is one of the purchases that you won’t regret making. Once you get a T-fal deep fryer for your home, you won’t feel like ordering fried food from a restaurant.

However, your T-fal deep fryer is just like any other modern appliance. It requires proper care and cleaning. Every time you prepare something in your deep fryer, you should follow the instructions listed in the manual. If you make any mistake, you can end up damaging your appliance.

If you own a T-fal deep fryer, this article is the perfect place for finding fixes to draining issues. In the article, we have come up with some solutions for resolving draining issues.

So, if you face such problems, try any of these fixes after examining your deep fryer’s condition. If these solutions do not work, call the T-fal Customer care center or leave a comment below. We will resolve your issues as soon as possible.

• 5 месяцев спустя…

Содержание

• Проблемы пилота
• Горелка неисправна
• Проблемы контроля температуры
• Проблемы с фильтрацией масла

Frymaster — известный и часто используемый кулинарный инструмент в ресторанной индустрии. Если ваш Frymaster не работает эффективно, вы можете выполнить несколько шагов по устранению неполадок, чтобы диагностировать и устранить проблему. Типичные неисправности, с которыми может столкнуться Frymaster, обычно связаны с пилотом, горелкой, проблемами контроля температуры, фильтрацией масла или утечкой масла.

Проблемы пилота

Проверьте подачу газа. Убедитесь, что главный кран подачи газа открыт. Если он включен, но вы не можете зажечь Frymaster, возможно, засорилось пилотное отверстие или в газовых линиях есть воздух.

Очистите вокруг пилотного отверстия стальной щеткой, чтобы удалить весь мусор, который может засорить блок и препятствовать зажиганию пламени.

Проверьте, правильно ли подключен гибкий газовый шланг и подключена ли фритюрница.

Посмотрите, полностью ли закрыт сливной клапан, если у вас есть система фильтрации. Рукоятка клапана должна быть закрыта, чтобы питание поступало на газовый клапан, когда он взаимодействует с микровыключателем. Открытая ручка клапана — даже приоткрытая — не даст ему сработать.

Горелка неисправна

Поверните ручку горелки и зажгите пламя. Если огонь идет только с одной стороны или не горит со всех сторон должным образом, возможно, отверстия вашей горелки забиты. Выключите пламя, очистите отверстия металлической щеткой и снова зажгите.

Следите за колебаниями пламени. Это может быть вызвано колебаниями давления газа или воздуха в кухонной атмосфере.

Слушайте пламя горелки. Если он слишком шумный, давление газа может быть слишком высоким или газовый клапан заблокирован. Уменьшите давление и проверьте, не заблокирован ли газовый клапан, и удалите мусор металлической щеткой.

Проблемы контроля температуры

Проверьте температуру масла с помощью термостата или наконечника пирометра. Если температура не остается в пределах заданного значения, возможно, ваш термостат не калиброван, ручка или гибкий вал на валу термостата ослаблен, провод термостата отсоединен от блока или сломан, или термостат неисправен.

Проверьте провод, чтобы убедиться, что он подключен и не оборван. Если он отсоединен или болтается, подключите его. Если он сломался, придется заменить термостат.

Затяните ручку или вал термостата, если он ослаблен. Замените термостат, если эти решения не устранили проблемы с контролем температуры.

Проблемы с фильтрацией масла

Послушайте, чтобы определить, работает ли насос. Если насос работает, но масло не проходит через фильтр, посмотрите на фильтровальную бумагу и ее размер. Посмотрите на дно фильтровального лотка, чтобы убедиться, что уплотнительные кольца на месте. Если уплотнительные кольца отсутствуют или изношены, насос всасывает воздух и не позволяет фильтру работать должным образом.

Если насос не работает, дайте двигателю остыть не менее 15 минут. Найдите красный переключатель сброса на двигателе насоса, ближайшем к оператору, и нажмите его, чтобы перезапустить двигатель. Если двигатель перезапускается и насос начинает перекачивать, проверьте его эффективность. Если он запускается, но не перекачивает, насос может быть заблокирован из-за неправильного размера фильтра или неправильной установки, позволяющей проникать внутрь частицам пищи.

Отключите питание от системы фильтрации, снимите входной трубопровод с насоса и с помощью отвертки вручную поверните шестерни насоса назад, чтобы удалить застрявшие частицы, или поверните их вперед, чтобы более мягкие предметы прошли через насос.

Используйте шнек или дренажную змею, чтобы удалить частицы пищи, которые прошли и забили всасывающую трубку.

Вернуться в «Режущие плоттеры ROLAND»

®
OPERATING GUIDE
(FASTRON.)
®
 VC-210 Controller
Save the instructions
for future reference.
www.KitchenBrains.com
24/7 Toll-Free Technical Support
1-800-243-9271
(from the U.S., Canada and the Caribbean)
Kitchen Brains © 2017   |   www.KitchenBrains.com   |   229-51422 D
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
Page 1 of 8





Operating the (FASTRON.)
®
 VC-210
Kitchen Brains © 2017   |   www.KitchenBrains.com   |   229-51422 D
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
Page 2 of 8
The (FASTRON.)® VC-210 process controller is used to 
control many different appliances.
Each controller can time up to 20 products, store 
messages, alarm names, cooking and filtering parameters, 
and has shortening management capabilities.
  Kitchen Brains is not liable for any use 
of product not in accordance with its 
installation and operating instructions.
 
Before using this equipment or for any 
questions on the operation of the appliance, 
consult and follow all instructions and safety 
warnings found in the appliance operators’ 
manual supplied from the manufacturer of 
the appliance.
OPERATING THE  (FASTRON.)® VC-210 
CONTROLLER
RECIPE REVIEW — Quickly see what is programmed for 
each product key
1.   Press the SCAN key.
2.  Select any product key previously programmed–LED will 
be lit above the key.
3.  Press the DOWN arrow key to scroll through the list.
4.  Press SCAN to exit. 
VIEW TEMPERATURE  SETTING
1. Press the TEMP key ‘once’ to view Actual temperature, or
2. Press the TEMP key ‘twice’ to view Set temperature.





Operating the (FASTRON.)
®
 VC-210
Kitchen Brains © 2017   |   www.KitchenBrains.com   |   229-51422 D
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
Page 3 of 8
RECIPE PROGRAMMING (1724)
KEY PRESS DISPLAY ACTION
1
Enter Program Mode •  To enter programming mode, press 
and hold the “P” key for 3 seconds.
•  Scroll down to “Programming.”
•  Press the “P” key to lock in entry.
•  The display will prompt user to enter 
a pass code.
2
Enter Pass Code Enter Code
****
Recipe
•  Enter pass code 1 7 2 4.
•  Press the “P” key to lock in your entry.
•  Display will show “Recipe.” Press the 
“P” key.
3
Choose a Product Key 
(Recipe)
SELECT PRODUCT TO PROGRAM
Choices are: 
ALL,  NAME, TIME, TEMPERATURE, 
TIMING, PRESSURE
1
, ALARM, 
ALARM NAME, ALARM DONE, 
TONE, HOLD TIME, HOLD LINK, 
FLTR LCKOUT, PRODUCT CNT, RQI 
TRACKER
2
, EXIT
1
”Pressure” will only appear if 
appliance is a pressure fryer.
2
”RQI TRACKER” will only appear 
if it was selected in System 
Programming.
•  Press the product key to be 
programmed. That key’s LED will 
remain lit.
•  Scroll to the feature you want 
changed and press the “P” key. 
NOTE: Selecting “ALL” allows you to 
review and/or change all parameters for 
that key.
To jump to a specific feature, select one 
from the list and follow the appropriate 
instructions to make the changes.
OR
OR





Operating the (FASTRON.)
®
 VC-210
Kitchen Brains © 2017   |   www.KitchenBrains.com   |   229-51422 D
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
Page 4 of 8
4
Choose a Product Name PRODUCT NAME •  Press the UP or DOWN arrow keys 
to scroll through product names, OR 
start spelling the desired product 
name by using the top row of lettered 
product keys.
•  Press the “P” key to lock in selection.
5
Set Stage 1 Cook Time STAGE  1 TIME
MM:SS
•  Type in the time for Stage 1. Range is 
from 00:00 to 99:59.
•  Press the “P” key to advance to next 
stage or parameter.
6
Set Stage 1 Temperature STAGE  1 TEMP
XXX F
•  Type in the Setpoint temperature for 
this stage. Range is from 200 to 375 F, 
or the equivalent of Degrees C.
•  Press the “P” key to advance to the 
next stage or parameter.
7
Set Stage 1 Timing STAGE  1 TIMING   
(STRAIGHT, FLEX)
•  Press the LEFT or RIGHT arrow keys 
to select the type of timing to be used 
for this stage.
•  Press the “P” key to advance to next 
stage or parameter.
OR
OR





Operating the (FASTRON.)
®
 VC-210
Kitchen Brains © 2017   |   www.KitchenBrains.com   |   229-51422 D
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
Page 5 of 8
8
Set Pressure Solenoid 
Position
STAGE 1 PRESSURE  
(OPEN, CLOSED)
•  Press the LEFT or RIGHT arrow 
keys to select whether the pressure 
solenoid should be opened or closed. 
This message will appear only 
if the appliance is a pressure 
fryer.
•  Press the “P” key to advance to next 
stage or parameter.
•  The display will show “Stage Time 2.” 
If you have a second time, type in that 
time and repeat steps 5-8. A total of 9 
stage times can be programmed.
9
If applicable, repeat steps 5-8 for additional stages.
A total of 9 stages can be programmed.
10
Set Alarm  1 Time 
(Selectable)
ALARM  1 TIME
MM:SS
•  Type in Alarm Time for activating the 
Action Alarm.  
Skip Steps 10-13 if the Alarm 
Time for this stage is zero.
•  Press the “P” key to advance to the 
next stage or parameter.
11
Set Alarm 1 Name 
(Selectable)
ALARM 1 NAME  
“ACTION”
•  Press the UP or DOWN arrow keys to 
scroll through the Alarm Names, OR 
start spelling the desired action alarm 
name by pressing the appropriate 
product keys.
•  Press “P” key to lock in the selection.
12
Set Alarm #1 Cancel Mode 
(Selectable)
ALARM 1 DONE  
(AUTOMATIC, MANUAL)
•  Press the LEFT or RIGHT arrow keys 
to select how the Action Alarm is to 
be canceled.
•  Press the “P” key to advance to next 
stage or parameter.
OR
OR
OR





Operating the (FASTRON.)
®
 VC-210
Kitchen Brains © 2017   |   www.KitchenBrains.com   |   229-51422 D
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
Page 6 of 8
13
Setting Alarm  1 Tone ALARM  1 TONE
SHORT, MEDIUM, LONG, DOUBLE, 
LONG/SHORT, NONE
•  Press the LEFT or RIGHT arrow keys 
to  select Alarm Tone.
•  Press the “P” key to advance to next 
stage or parameter.
14
If applicable, repeat Steps 10-13 for additional Action Alarms.  
A total of three (3) Action Alarms can be programmed.
15
Select  Hold Time HOLD TIME
00:00
(Note: time is in Hours:Minutes)
•  Type in the length of hold time 
required. The value is in the range of 
0 to 60.
•  Press the “P” key to advance to the 
next step or parameter.
16
Set Filter Lockout FILTER LOCKOUT
(COOL, NO FILTER, 1-99)
•  Press the LEFT or RIGHT arrow keys 
to select how you want to end a cook 
cycle.
COOL = return to Setback temp. after 
cook.
No Filter = return to Drop temp. after cook
1-99 = # of cooks allowed before entering 
filter locked. When 1-99 is selected, 
product cycles will return to drop temp. 
until a filter lockout cycle is forced.
•  Press the “P” key to select.
17
Set Product Heads PRODUCT HEADS
XX
•  Press the LEFT or RIGHT arrow keys 
to select count value. The range is 0 to 
99 pieces or “USER PROMPT.”
•  Press the “P” key to advance.
18
Select Another 
Product Key
SELECT PRODUCT  
TO PROGRAM
•  Repeat from step #3 in this section, 
or press the “P” key and scroll to 
Exit.
•  Press the “P” key to exit 
programming.
OR
OR
OR





Operating the (FASTRON.)
®
 VC-210
Kitchen Brains © 2017   |   www.KitchenBrains.com   |   229-51422 D
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
Page 7 of 8
NOTES





Europe, Middle East, Africa
  
31 Saffron Court Southfields Business Park 
Basildon, Essex SS15 6SS ENGLAND  
Phone: +44 0 1268544000 
China 
 
1803, 18F, No 922 Hengshan Rd  
Shanghai 200030, CHINA  
Phone: +8613916 854 613 
Asia Pacific 
 
13A MacKenzie Road 
228676 
Singapore 
Phone: +65 98315927
Food Automation - Service Techniques, Inc. 
905 Honeyspot Road, Stratford, CT 06615-7147 USA
Phone: +1-203-377-4414 
Sales: 1-800-FASTRON 
Fax: +1-203-377-8187 
www.KitchenBrains.com
 
Toll-free technical support from the U.S., 
Canada, and Caribbean: 1-866-840-4271
Operating the (FASTRON.)
®
 VC-210
Kitchen Brains © 2017   |   www.KitchenBrains.com   |   229-51422 D
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
Page 8 of 8