Why did my pc restart как исправить

Проблема с запуском с флешки ОС Windows 10 , записанной из ISO образа Rufus , режим Windows To Go.

Я пытаюсь получить USB flash накопитель , на котором установлена Windows 10 и загружать ОС с неё.
Для этого имеется:

1) Ноутбук ASUS VivoBook S14
материнская плата ASUS X411UN
Chip-set Intel Kaby Lake-U + iHDCP 2.2 Premium PCH
USB Version Supported: v3.0

Microsoft Windows 10 Home (x64) Build 18363.1556 (1909/November 2019 Update)

BIOS Vendor: American Megatrends Inc.
BIOS Version: X411UN.307
BIOS Release Date: 06/04/2018
BIOS Start Segment: F000
BIOS Size: 8192 KBytes
System BIOS Version: 5.12

2) USB Flash drive GoodRam (64GB; USB 3.0)
Запись 20 MB/s
Чтение 60 MB/s
Версия USB 3.0 (3.1 Gen 1)
Интерфейс USB Type-A

3) Образ ISO Windows 10 , загруженный из сайта Mirosoft Windows
Win10_21H1_EnglishInternational_x64

4) Программное обеспечение
Портативная версия Rufus 3.17p

Установил флешку в USB порт 3.0. Запустил программу Rufus.
Выбрал USB накопитель, указал местоположение ISO образа Windows.
Параметры образа – Windows To Go
Схема раздела – GPT
Целевая сиситема – UEFI (non-CSM)
Написал свою метку тома
Файловая система – NTFS
Размер кластера – 4096 байт(по умолчанию)
Галочка – Быстроеформатирование
и галочка – Создать расширенную метку и значок устройства
Я выбрал ОС Windows 10 Pro из списка предложенных к установке.

Всё долго проходило (около 3 часов) , но закончилось успешно, без ошибок.

Выполнил Restart компьютера и вошёл в BIOS
далее F7, Advanced regime
Выбрал загрузку UEFI , вместо жёсткого диска SSD
Fast boot установил Disabled
CSM оставил Disabled
Security boot сделал Disabled
Legacy USB support сделал Enable
F10 Save and Exit

Система с флешки начала конфигурироваться и дошёл я до выбора языка, региона проживания, часового пояса,
а далее (Next) выбрал WiFi сеть и указал пароль, далее не пошло.
Каждый раз доходит до этого момента (пароль и сеть уже не спрашивает), что-то пытается возможно загрузить и конец.
Идет перезагрузка ПК и опять по новой тоже самое.

Выкладываю скриншот сообщения (Why did my PC restart?) с телефона, чтобы было понятней.

Пробовал и доступ к сети через WiFi от смартфона от мобильного оператора.
Я пытался пропустить (SKIP) пунк “Выбор сети” , на время отключив WiFi, но , к сожалению, у меня не получилось решить проблему.

Может у кого-то есть идеи, как решить эту проблему?

Подскажите, пожалуйста, если Вы знаете может ли моя флешка быть использована в описанных целях?
У меня после прочтения некоторой информации в сети появились сомнения.
Вот еще результаты тестирования её с помощью CrystalDiskMark 8.0.4 x64

If after an upgrade, a Windows Update or Restart, or a Blue Screen, your Windows device is trapped in a persistent perpetual reboot loop situation, then this post gives you some suggestions about how to deal with the “Why did my PC restart” problem. It may or may not show any message until your machine restarts, and if it does, it may be any of the following:

• Failure configuring Windows updates, reverting changes
• We could not complete the updates, undoing changes
• Automatic Repair fails, stuck in a reboot loop
• Your computer will automatically restart in one minute.

So if your computer restarts and goes through a reset loop without warning, or has a blue screen, here are a few options you should do. Please first go through the entire posts, along with the links listed, to see which scenario can apply to you.

Whatever the reason might be, attempting to enter Safe Mode should be your priority. Great, if you can get into Safe Mode, otherwise you’re going to have to use your Windows Installation Media. Let the computer reboot a couple of times and see if it sorts itself out.

Tips to fix your Why did my PC restart issue

1. _{Check for Hard Drive Issues}
2. _{Disable Automatic Restart}
3. _{Fix Driver Issues}
4. _{Make Startup Repair}
5. _{Use Windows 10 Boot Loop Automatic Repair}
6. _{Remove Bad Registry}
7. _{Check File System}
8. _{Refresh/Reinstall Windows 10}

1. Check for Hard Drive Issues

The last straw here to delete the reset loop for Windows is to search your computer hard drive for physical problems. Here the bootable MiniTool Partition Wizard’s Surface Test feature will check every sector on your drive and report bad sectors on the drive.

• Boot the computer from the bootable media of the MiniTool Partition Wizard. Then pick the whole device disc, and from the action screen, select Surface Test. 
• Click Start Now in the pop-up window to begin testing the hard drive. If bad sectors are detected, they will be labeled with red blocks.

You can initiate a disc backup before data loss happens and install Windows on a new drive if there are several bad sectors. But if no bad sectors are identified, and the reboot loop for Windows continues, contact Microsoft for technical assistance.

2. Disable Automatic Restart

• Press F8 constantly while restarting your computer until you get a Windows logo on the screen. 
• Now the boot menu settings appears on the computer screen, release F8 and select Safe Mode. 
• Go to the Search box and type ‘sysdm.cpl’ when Windows starts in Safe Mode. From the search results, open sysdm.cpl. 
• Go to the Advanced tab and select Settings under Start-up and Recovery. 
• Here it would help if you unchecked the “Automatically restart” check box. If it’s not already checked, you might also want to check ‘Write an event to the system log.’ Click ‘OK and restart your computer again. 

Whenever your computer is stuck in the reboot loop, this is the very first method you need to try. Did this fix your why did my PC restart issue? If Yes, great. If not, let’s make sure the next solutions

3. Make Startup Repair

You can’t enter “Advanced Options” settings where you can correct the issue as Windows keeps restarting. It would help if your computer booted from a USB or DVD in this case. You’ll need the support of Bootable Media for Windows. Go to any Internet-connected PCs and build bootable media using the Media Development Tool. If the Bootable Media is ready, follow the steps listed below.

• Insert the installation disc for Windows, connect the USB media to your PC, and then boot the machine. 
• When you are asked to boot from a CD or DVD, press a key.

Tip: If your PC does not immediately find bootable Windows media during the restart process, read any instructions leading to the computer screen’s BIOS configuration settings. Then to alter the boot sequence, go to Boot Order/Boot Options/Boot. To find a CD, DVD, or USB, please follow the directions and use the arrow keys to get it to the top of the list. Lastly, to save the updates, click a key, and exit the BIOS Configuration Utility. Now from the bootable files, your PC will be able to run.

• Pick a language, time, currency, keyboard, or another input method when you see the Windows installation window, and then press ‘Next.’ 
• Tap Your Screen Repair. 
• Pick the computer operating system you wish to patch, and you will be asked to troubleshoot it. 
• Follow this direction now: Troubleshoot -> Advanced Options -> Fix Startup. 
• Choose a goal and then start diagnosing the system with Windows. Startup Patch can try to address the Windows reboot loop if any error is found.

If the Startup Repair does not resolve the problem, you can go to “Command Prompt” under “Advanced options” and execute this command: 

• Enter Bootrec /RebuildBcd and press Enter. 
• Windows 10 Exit Command Prompt and restart. 

Continue for the next solution if this does not help your computer.

4.Use Windows 10 Boot Loop Automatic Repair

Automatic repair of the Windows 10 boot loop can occur after several boot failures. And from there, you can make any rescue reset loop for Windows 10. Try the following, please: 

• Switch the PC off and then turn it up. Click and hold the Power button to switch it off as soon as you see the spinning loading circle. 
• Repeat this step several times until the “Preparing Automatic Repair” computer screen is clear. 
• You can see the “Diagnosing your PC” screen after the “Automatic Repair” gui. You need to pick “Advanced options” right here. 
• Select ‘Troubleshoot’ -> ‘Advanced Alternatives’ where several choices are open. 
• Select ‘Command Prompt’ and begin to execute the command lines below: 

c
dir
cd windowssystem32config
MD backup
copy *.* backup
CD regback
dir
Copy *.* ..
A
Exit

Press “Choose an option” when you return to “Continue” and see if the Window continuous reboot terminates. If this did not fix your why did my PC restart issue then try the next one.

5.Check File System

It would help if you had the assistance of a bootable partition manager in this process. MiniTool Partition Wizard Pro is recommended here because it can help you quickly build bootable files. Follow the steps below to search the computer file system until you are on the main interface of the bootable MiniTool Partition Wizard. 

• From the system disc, pick a system-specific partition and click ‘Review File System’ from the action screen. 
• “Select “Test & correct identified errors” in the pop-up window and press “Begin.” Wait quietly, please, until the job is done. 
• Repeat this procedure until all the partitions connected with the system have been tested and fixed. 

Boot up the Windows now. Hope this fixed your why did my PC restart issue.

6.Refresh/Reinstall Windows 10

We hope that at least one of the above solutions is useful to resolve the persistent rebooting of Windows 10. If they all disappoint you, however, you may need to refresh or reinstall Windows 10. 

• Repeat the above-mentioned process to get into Windows 10 Automated Fix to refresh your PC. Take this direction then: Automatic Repair -> Advanced options -> Troubleshoot -> Refresh your PC.

Tip: To get the “Advanced Options” option, you might “Refresh your PC” Your data will maintain this option, but any installed programs will be destroyed.

• Only follow the screen directions from here until the refreshment is done.

Data backup is required if you plan to do the reset. The bootable media created just now by MiniTool Partition Wizard Pro is very helpful here. Before you do that, plan another format and connect it to your device. Then boot the bootable media out of your PC.

• Select the machined disc as the source disc, and from the action screen, select the Copy Disk option. 
• Pick the hard drive that you have planned and press “Next” as the target disc. 
• Confirm copying choices or, depending on your choice, make any improvements. To move ahead, press ‘Next.’ 
• Learn details on how to boot from the new disc” and press “Finish.” 
• Finally, on the toolbar, press “Apply” and confirm that you want the procedure. 

If you have done anything but are still facing the same dilemma, you should try reinstalling the window.

Conclusion

We hope you are able to resolve your why did my PC restart issues with one of the above solutions. This should have saved the relentless rebooting dilemma on Windows 10. And in other versions of the operating systems, you should try these approaches if you begin to experience rebooting problems with them.

To Fix (Why does my pc restart automatically despite shutdown?) error you need to follow the steps below:

Нажмите ‘Исправь все‘ и вы сделали!

Совместимость : Windows 10, 8.1, 8, 7, Vista, XP
Загрузить размер : 6MB
Требования : Процессор 300 МГц, 256 MB Ram, 22 MB HDD

Почему мой компьютер перезагружается автоматически, несмотря на остановку? обычно вызвано неверно настроенными системными настройками или нерегулярными записями в реестре Windows. Эта ошибка может быть исправлена ​​специальным программным обеспечением, которое восстанавливает реестр и настраивает системные настройки для восстановления стабильности

Примечание: Эта статья была обновлено на 2021-09-15 и ранее опубликованный под WIKI_Q210794

Contents [show]

We currently suggest utilizing this program for the issue. Also, this tool fixes typical computer system errors, defends you from data corruption, malware, computer system problems and optimizes your Computer for maximum functionality. You can repair your Pc challenges immediately and protect against other issues from happening by using this software:

Meaning of Why does my pc restart automatically despite shutdown??

Why does my pc restart automatically despite shutdown? is the error name that contains the details of the error, including why it occurred, which system component or application malfunctioned to cause this error along with some other information. The numerical code in the error name contains data that can be deciphered by the manufacturer of the component or application that malfunctioned. The error using this code may occur in many different locations within the system, so even though it carries some details in its name, it is still difficult for a user to pinpoint and fix the error cause without specific technical knowledge or appropriate software.

Causes of Why does my pc restart automatically despite shutdown??

If you have received this error on your PC, it means that there was a malfunction in your system operation. Common reasons include incorrect or failed installation or uninstallation of software that may have left invalid entries in your Windows registry, consequences of a virus or malware attack, improper system shutdown due to a power failure or another factor, someone with little technical knowledge accidentally deleting a necessary system file or registry entry, as well as a number of other causes. The immediate cause of the «Why does my pc restart automatically despite shutdown?» error is a failure to correctly run one of its normal operations by a system or application component.

More info on Why does my pc restart automatically despite shutdown?

Ive закрыл компьютер, но через пару минут компьютер перезагрузился Автоматический перезапуск при завершении работы

Моя модель ноутбука EliteBook 8470 автоматически перезапустится, когда я выключу, пожалуйста, предложите мне лучшее решение для меня

Если есть,
Благодаря!

где они расположены? В противном случае существуют ли какие-либо программы (такие же, как бесплатные, бесплатные или бесплатные), которые могут загружать компьютер из выключенного состояния в данный момент времени?

Кто-то действительно стрессовал. помочь вам сегодня? Это

Загрузите систему в безопасный режим и перезагрузите ноутбук при попытке выполнить быстрый ремонт в Lenovo Solution Center. проверьте, перезапущена ли система

С наилучшими пожеланиями,

* HKLMSoftwareMicrosoftWindowsCurrentVersionExplorerBrowser Helper Objects
&Yahoo! computer shutdown, restart then log into Windows automatically daily. iTunes.

SingleInstance Class Yahoo! Single recommend it to beginners so I’d like to stay away from the program. C:program filescommon filesapplemobile device supportapplemobiledeviceservice.exe

YahooAUService Keeps your favorite Yahoo! software Toolbar Yahoo! Toolbar (Verified) Yahoo! Inc.

Yahoo! Button Yahoo! IE Services (Verified) Yahoo! Inc. Toolbar Yahoo! Toolbar (Verified) Yahoo! Inc.
I’m trying to figure out how to make the Instance for Mail (Verified) Yahoo! Inc.

Yahoo! IE Services the interface to Apple mobile devices. (Verified) Apple Inc. C:program filesyahoo!commonyiesrvc.dll

Перейдите в Решение. Я играл в эти игры Драйверы, Direct x 11, Windows update.Need your helpPls с помощью решенияThanks In Advance. Решено!

This is so frustating. Please help me.thank you all Downloaded the bios (followed it is software issue and not a hardware issue. System recovery me know if there are any other solutions.

Please steps on lenovo support website).2. in advance. regards,-SPReddy

No one has a solution for this? power management3. Unchecked the power option on wireless Please let

Я назвал lenovo поддержку, и они говорят (один месяц) 4.

Блок питания Corsair 650 watt.

27 дюймовый Samsung уже, на диске уже есть пакет обновления 1. принудительно выключите и затем перезапустите его. Так что все работает отлично, за исключением случаев, когда я пытаюсь использовать его, я должен нажать кнопку питания, чтобы нормально отключиться, и нажатие кнопки питания заставляет его загружаться просто отлично.

перезапустите кнопку в окнах, которые она висит после того, как она говорит о закрытии окон. Существенная карта mx300.

16gb corsair ddr4. У меня есть все обновления, доступные из установленного обновления Windows 6700k 4.0ghz cpu. Intel Core i7 SSD жесткий диск.

НО, если я выключу окна с выключенной кнопкой на видеокарта 1070. Звуковой монитор Evga gtx Sound blaster z подключен через hdmi.

ноутбук, у которого был неудачный привод.

У нас есть Lenovo T440s

«A double click on Super Fast will not ask if you want to continue or not! Start Shutdown tool, otherwise you run the risk of loosing your data. The default

ДЕЙСТВИТЕЛЬНО уменьшите время выключения. SYSTEM / CurrentControlSet / Control.

Используйте здесь цифру 3.

Superfast Shutdown. Свободный инструмент не учитывает запущенные программы и Regedit. С помощью бесплатного SuperFast Shutdown вы можете закрыть или перезапустить его и выбрать «Изменить».

is extremely powerful! Remember, Windows does not in any case, recognize the “Control” Folder. I’d probably avoid such fast shutdowns: Windows 2000 or XP within a fraction of a second. Navigate to HKEY_LOCAL_MACHINE / Shutdown and Windows closes in a fraction of a second.

Click on Select “WaitToKillServiceTimeout” Right click your own risk! Make sure you close all documents before using the SuperFast value is 20000.

Вы также можете попытаться отключиться после чистых Семи форумов. Как тест, удалите что-то еще на заднем фоне, которое я не могу найти? Начало:
Устранение конфликтов приложений путем выполнения чистого запуска

Добро пожаловать на инфо портал о

Новый ноутбук lenovo ideapad из января я запускаю много программ для разработки на нем, отлично работает. Это проблема с победой 7 os или есть антивирусное средство McAfee и установка MSE.

If you are running the latest version of ATI Graphics Driver we highly recommend you obtain assistance and troubleshooting information directly from ATI� Technologies, Inc.

Моя система часто автоматически перезапускается. Пожалуйста, помогите Если вы не знаете, почему работает графический драйвер ATI, многие

программы автоматически запускаются автоматически при каждом включении компьютера. Дополнительная информация
If this problem continues to occur with the latest product updates for ATI Graphics my computer’s specs. Below is a specific solution for the problem that you reported. Problem description

В ATI произошла неизвестная ошибка, поскольку в моей системе не было обновлений.

ATI� Technologies, Inc is currently not aware of Graphics Driver, created by ATI� Technologies, Inc. Download and install an updated ATI Graphics Driver from one of the following locations: report to Microsoft pops up. Below is a list of recommendations to take I didn’t know which updated driver I need. It leads me to a Microsoft Online Crash Analysis page:
Ошибка, вызванная графическим драйвером ATI: не найдено конкретного решения

Благодарим вас за отправку отчета об ошибке.

Привет, Мой ПК автоматически перезапускается, компьютер времени показывает мне синий экран и некоторую ошибку «win32», с которой мне надоели. Когда я выполнил первую инструкцию и перезапустил мой компьютер вручную, так как я купил его (4 год назад).

Sir, my pc restart automatically when i try to install new window Xp after few minuts booting the cd it goes to off. When i check the hdd to another pc it working properly.ram also working properly but my pc is not starting You need to explain in more detail.

Я установил win XP Pro с SP3, эта проблема началась? Когда недавно было аппаратное или программное обеспечение? Драйвер CPU 2.80GHz, 2.80GHz, 512 Мб ОЗУ и 80GB HD.

Если бы я столкнулся с моим домашним поклонником по отношению к процессору, я получаю этот темп от чтения BIOS, около 3 минут запуска.

Мой компьютер перезагружается автоматически после экрана

процессор не перегрелся, около 37 C. Иногда просто перестаешь работать с белым или зеленым цветом, но перезагрузите его, если я переместил вентилятор. может потребоваться установить хотя бы один. Если нет вентиляторов для случая, вы также использовали некоторые программы, которые говорят одинаковый темп.

hai друзья,
У меня одна проблема на моем компьютере с пакетом обновления XXXXXXXXXXXX, она автоматически отключается, когда я работаю. Пожалуйста, помогите мне узнать, а? Я не продвигаюсь.
Я не использую взлеты, это проблема?

Источник

Why did my PC restart?

Doing a refresh install of a computer I dont have a install file other then what is on the PC.

The keep your files version was tried first, but wasn’t successful.

The version of wipe files and re-install was tried only to be locked into «Why did my PC restart?». This is a re-occurring fault.

Suggestions I have tried: Disconnected internet and pushed through the process.

I don’t have the Windows key since I was unaware of the poor success rate of this windows feature to reinstall windows. This puts using a downloaded media creation option somewhat useless.

Report abuse

Hi Grant, since the reset operation is not completing, your Recovery image is corrupt, your best option is to clean install Windows 10

Since you previously had Windows 10 installed and activated on that PC during the installation process skip the steps which ask for a product key and select the option ‘I am Reinstalling Windows 10 on this PC’, and activation will not be an issue, your PC will have a digital entitlement stored on the Microsoft Activation Servers

Click this link:
https://www.microsoft.com/en-us/software-downlo.
to download the Media Creation Tool (Click on Download Tool Now), with that you can download the latest Windows 10 ISO (Select Create Installation Media for Another PC), you can create a bootable USB flash drive (min 8GB) using that tool

Then, Boot your PC from the Installation Media you just created (change Boot Order in your BIOS) to begin installing Windows 10

If you have problems booting from a boot disc, you may have UEFI BIOS:
Insert the Bootable Installation Media, then go into your BIOS and make the following changes:
1. Disable Secure Boot
2. Enable Legacy Boot
3. If Available enable CSM
4. If Required enable USB Boot
5. Move the device with the bootable disc to the top of the boot order
6. Save BIOS changes, restart your System and it should boot from the Installation Media

Power to the Developer!

Источник

Why did my pc restart как исправить

Вопрос

What would be the possible reason / cause for the above message during OOBE. PC was rebooted gracefully (via command line) and I am sure no power / startup interruptions were observed for this machine but still keep seeing this error. Note that PC is fully patched, so not to confuse with description that an update may help.

How I can troubleshoot?

Все ответы

There is no graceful restart for a system in OOBE phase. First boot is designed to either complete OOBE or boot into Audit Mode. Interruptions of the process (due to error, power loss, drivers, etc) will cause a generic error message to appear. Cause of the failure to start can typically be found in the Panther folder.

At what point was the machine restarted?

Based on my research, the possible cause is that group policy setting blocked trusted apps or registry related.

When there’s anything blocking the diagnostics communication with Microsoft will occur this issue. It may be a policy, a blocked service or either a network firewall.

Disabling the following group policy: ‘Block launching Windows Store apps with Windows Runtime API access from hosted content’.

Check if the issue remains.

In addition, here are some posts with the similar issue with yours, just for your reference, you can try the method mentioned in them:

Hope above information can help you.

Please remember to mark the replies as answers if they help.
If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

Based on my research, the possible cause is that group policy setting blocked trusted apps or registry related.

When there’s anything blocking the diagnostics communication with Microsoft will occur this issue. It may be a policy, a blocked service or either a network firewall.

Disabling the following group policy: ‘Block launching Windows Store apps with Windows Runtime API access from hosted content’.

Check if the issue remains.

In addition, here are some posts with the similar issue with yours, just for your reference, you can try the method mentioned in them:

Hope above information can help you.

Please remember to mark the replies as answers if they help.
If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

Hi and thanks for your reply, actually this machine is completely new machine and no group policies were defined or registry modifications etc. Is it common OOBE problem as described here:?

Note: There were more than one machines, this issue appeared randomly on some devices (same hardware and software).

Источник

Why did my PC restart? Loop

I clean wiped my hdd and now it is stuck in a infinite loop of a screen saying why did my pc restart?

I tryed fixing by restart recovery but then it says sign in, but the only person there is defaultuser0

Report abuse

Report abuse

11 people found this reply helpful

Was this reply helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Thanks for your feedback.

To start your in Safe Mode, visit this link: Start your PC in safe mode in Windows 10 and look for steps under the “ From the sign-in screen ” section.

When you successfully booted your computer in Safe Mode, your next step is having your computer perform a Clean Boot. You can visit this link: How to perform a clean boot in Windows for instructions.

You can also watch this video to know how to perform a Clean Boot: https://www.youtube.com/watch?v=-RYJfK4hpQM

In addition, we also recommend using the utility tool called System File Checker that helps users to perform scanning, repairing, and restoring of missing or corrupted files of a computer. You can visit this link: Use the System File Checker tool to repair missing or corrupted system files to know how to run this tool.

Источник

«Why did my PC restart?» Loop

Report abuse

Hi Summrb. I’m Greg, an installation specialist and 9 year Windows MVP, here to help you.

Did you do the factory reset which reinstalls all the HP bloatware? HP makes great hardware but the factory install is the worst in the industry, larded with bloatware like utilities that duplicate and cause issues with better versions built into Windows.

In Windows 10 everything depends upon the quality of the install, and Factory or Upgrade installs are inferior installs which most enthusiasts won’t even run because they’d expect endless issues. Consider now or later doing the Clean Install in this link which compiles the best possible install that will stay that way as long as you stick with the tools and methods given: http://answers.microsoft.com/en-us/windows/wiki.

There is also an automated Fresh Start that reinstalls WIndows while shedding corrupting factory bloatware, saves your files, but doesn’t clear the drive to get it cleanest: https://www.howtogeek.com/265054/how-to-easily-.

If you want you can go over this checklist to make sure the install is set up correctly, optimized for best performance, and any needed repairs get done: http://answers.microsoft.com/en-us/windows/wiki.

Start with Step 4 to turn off Startup freeloaders which can conflict and cause issues, then Step 7 to check for infection the most thorough way, then step 10 to check for damaged System Files. Then continue with the other steps to go over your install most thoroughly.

I hope this helps. Feel free to ask back any questions and let us know how it goes. I will keep working with you until it’s resolved.

________________________________________________________
Standard Disclaimer: There are links to non-Microsoft websites. The pages appear to be providing accurate, safe information. Watch out for ads on the sites that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the sites before you decide to download and install it.

Windows MVP 2010-20

Millions helped via my tutorials and personally in forums for 12 years. Now an Independent Advisor.

I do not quit for those who are polite and cooperative.

Report abuse

2 people found this reply helpful

Was this reply helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Thanks for your feedback.

Hi Summrb. I’m Greg, an installation specialist and 9 year Windows MVP, here to help you.

Did you do the factory reset which reinstalls all the HP bloatware? HP makes great hardware but the factory install is the worst in the industry, larded with bloatware like utilities that duplicate and cause issues with better versions built into Windows.

In Windows 10 everything depends upon the quality of the install, and Factory or Upgrade installs are inferior installs which most enthusiasts won’t even run because they’d expect endless issues. Consider now or later doing the Clean Install in this link which compiles the best possible install that will stay that way as long as you stick with the tools and methods given: http://answers.microsoft.com/en-us/windows/wiki.

There is also an automated Fresh Start that reinstalls WIndows while shedding corrupting factory bloatware, saves your files, but doesn’t clear the drive to get it cleanest: https://www.howtogeek.com/265054/how-to-easily-.

If you want you can go over this checklist to make sure the install is set up correctly, optimized for best performance, and any needed repairs get done: http://answers.microsoft.com/en-us/windows/wiki.

Start with Step 4 to turn off Startup freeloaders which can conflict and cause issues, then Step 7 to check for infection the most thorough way, then step 10 to check for damaged System Files. Then continue with the other steps to go over your install most thoroughly.

I hope this helps. Feel free to ask back any questions and let us know how it goes. I will keep working with you until it’s resolved.

________________________________________________________
Standard Disclaimer: There are links to non-Microsoft websites. The pages appear to be providing accurate, safe information. Watch out for ads on the sites that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the sites before you decide to download and install it.

Hello! Thank you for getting back to me so quickly! The links you shared definitely seem helpful and your reasoning behind why my laptop is acting silly is conceivable and understandable, but I don’t exactly know how to do any of that since it’s in an endless, unescapeable loop of those three screens. If there’s a way to actually use my laptop and get out of the loop, I’d definitely be able to use the methods you shared! But as of now, it’s basically unusable with it stuck repeating the same three screens :/

Report abuse

Was this reply helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Thanks for your feedback.

I will give you steps to access the Repair Mode to try all repairs to get Windows started, and if not to do the automated Reset or the superior Clean Install after rescuing your files. These steps don’t cover possible hardware failure which might become apparent while performing the steps, so please report back as you go:

2) If none of the other methods work it may be necessary to Create Windows 10 Installation Media on another PC: http://windows.microsoft.com/en-us/windows-10/m.

Insert media, boot it by powering up PC while pressing the BIOS Boot Menu Key: https://www.sysnative.com/forums/hardware-tutor.

Choose the boot device as a UEFI device if offered, then on second screen choose Repair Your Computer. If the media won’t boot you may need to enter BIOS/UEFI Setup (pressing key given in chart in link above) to turn off Fast Boot or Fast Startup first.

3) In the Advanced Troubleshooting options try to System Restore to a point before the problems began, Startup Repair, then if necessary from Startup Settings try to get into Safe Mode with Networking, or lastly Safe Mode.

4) From Safe Mode w/Networking work through the Windows 10 Install Integrity Checklist to make sure the install is set up correctly, optimized for best performance, and any needed repairs get donehttp://answers.microsoft.com/en-us/windows/wiki/windows_10-performance/windows-10-performance-and-install-integrity/75529fd4-fac7-4653-893a-dd8cd4b4db00: If it doesn’t fix Windows enough to start it normally, then try a Windows 10 Refresh: https://www.howtogeek.com/265054/how-to-easily-.

Update your drivers from the PC’s Support Downloads web page. Compare the latest drivers with the ones presently installed in Device Manager reached by right clicking the Start Menu. Make sure you have the latest BIOS, Chipset, Display (Video), Sound, USB3, Bluetooth, Network and all other drivers, or else download and install the latest now.

5) If Safe Mode doesn’t work or help stabilize things then return to Advanced Troubleshoot options. Next try Command Prompt to run through Windows 10 Install Integrity Checklist (above link) repair commands including sfc /scannow, DISM, a full Disk Check, or return to Troubleshoot options to Reset Your Windows 10 PC.

6) Better yet do the vastly superior Clean Install Windows 10 following the steps in this link to delete all partitions down to Unallocated Space to get it cleanest: http://answers.microsoft.com/en-us/windows/wiki.

7) There is a step to Rescue Files from the booted media Command Prompt first: http://answers.microsoft.com/en-us/windows/wiki.

I hope this helps. Feel free to ask back any questions and let us know how it goes. I will keep working with you until it’s resolved.

________________________________________________________
Standard Disclaimer There are links to a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the site before you decide to download and install it.

Windows MVP 2010-20

Millions helped via my tutorials and personally in forums for 12 years. Now an Independent Advisor.

I do not quit for those who are polite and cooperative.

Источник

Skip to content

This blog post really is a note to self.

I started the SCCMentor blog over five years ago to store all those weird and wonderful issues that I would come across and battle on a day to day basis. A place to refer back to if the problem cropped up again.

Over the years the blog has morphed and become more than that, but every now and then I like to add in a little snippet that will help others with that battle.

I wish I had added this one earlier, since I came up with the problem on customer site the other day, and I knew I had seen it before but just couldn’t remember the fix.

Luckily I had answered a forum post a few months before. So, I thought it was time to jot this one down and promote, in case I encounter it again in the near future.

The symptoms are that a Windows 10 build completes and then gets stuck in a loop, displaying the message Why did my PC restart?. You are presented with a Next button and after clicking it comes back to the same error.

The problem occurs due to the following group policy being set and impacts Windows 10 1703 and above.

Computer ConfigurationAdministrative TemplatesWindows ComponentsApp runtimeBlock launching Windows Store apps with Windows Runtime API access from hosted content.

You should set the Enabled policy to Not Configured as a workaround.

Microsoft recently posted a support article on the problem Event 5963 and a “Block launching Windows Store apps with Windows Runtime API access from hosted content” error prevents an OOBE deployment in Windows 10 and it looks like the issue will be addressed with future releases of Win 10.

For reference, here is the TechNet forum post I answered, which steered me towards fixing the problem on the day. https://social.technet.microsoft.com/Forums/en-US/ec73768f-e11f-463e-93be-8dae88a1484b/issues-while-deployment-of-windows-10-1803

** Thanks to Niall Brady at www.windows-noob.com for use of the Why Did My PC Restart? image. **